main
History Download
Ray Publish 0.1.0 ff58c25

ADS8555SPMR

Texas Instruments · Analog To Digital Converters (ADCs) · LQFP-64(10x10)

ADS8555SPMR from Texas Instruments, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DB14/REFBUFEN bidirectional In parallel mode with HW/SW low, this is data bit 14 and the reference buffer enable input, which must be low to enable all reference buffers when the internal reference is used; in software mode it must be tied to BGND or BVDD.
2 DB13/SDI bidirectional Data bit 13 I/O in parallel mode; in hardware mode it must be connected to BGND, and in software mode it is the serial data input SDI.
3 DB12 bidirectional Data bit 12 input/output in parallel mode, which must be connected to BGND.
4 DB11 bidirectional Data bit 11 input/output in parallel mode, which must be connected to BGND.
5 DB10/SDO_C bidirectional Data bit 10 input/output, which is the data output for channel C when SEL_C = 1 and must be tied to BGND when SEL_C = 0.
6 DB9/SDO_B bidirectional Data bit 9 input/output, which is the data output for channel B when SEL_B = 1 and must be tied to BGND when SEL_B = 0; when SEL_C = 0, channel C1 data are also available on this output.
7 DB8/SDO_A bidirectional Data bit 8 input/output and data output for channel A; when SEL_C = 0, channel C0 data are also available here, and when SEL_C = 0 and SEL_B = 0 it is the single data output for all channels.
8 BGND power_in Buffer I/O ground, to be connected to the digital ground plane.
9 BVDD power_in Buffer I/O supply, to be connected to the digital supply at 2.7 V to 5.5 V and decoupled to BGND with a 1-µF ceramic capacitor or a 100-nF plus 10-µF combination.
10 DB7/HBEN/DCEN bidirectional In word mode this is data bit 7 and the daisy-chain enable (high enables DB[5:3] as DCIN inputs, otherwise tie to BGND); in byte mode it is the high-byte enable that sets the output byte order.
11 DB6/SCLK bidirectional In word mode this is data bit 6 and the serial interface clock input, rated 36 MHz max; in byte mode it must be connected to BGND or BVDD.
12 DB5/DCIN_A bidirectional In word mode this is data bit 5 and the daisy-chain data input for channel A when DCEN = 1; in byte mode it is connected to BGND when DCEN = 0.
13 DB4/DCIN_B bidirectional In word mode this is data bit 4 and the daisy-chain data input for channel B when SEL_B = 1 and DCEN = 1; in byte mode it is connected to BGND when DCEN = 0.
14 DB3/DCIN_C bidirectional In word mode this is data bit 3 and the daisy-chain data input for channel C when SEL_C = 1 and DCEN = 1; in byte mode it is connected to BGND when DCEN = 0.
15 DB2/SEL_C bidirectional In word mode this is data bit 2 and the select input for SDO_C, which is active when high and disabled when low; in byte mode it must be connected to BGND or BVDD.
16 DB1/SEL_B bidirectional In word mode this is data bit 1 and the select input for SDO_B, which is active when high and disabled when low; in byte mode it must be connected to BGND or BVDD.
17 DB0/SEL_A bidirectional In word mode this is data bit 0 (LSB) and the select input for SDO_A, which is active when high and disabled when low; in byte mode the datasheet states it must always be high.
18 BUSY/INT output With CR bit C21 = 0 it is the converter busy output, high during conversion and low once all six channels are latched, and with C21 = 1 it is an interrupt output that goes low on the first read access; polarity is set by C20.
19 CS/FS input Chip select input, where low enables the parallel interface and high disables it; in serial mode the falling edge of FS controls the frame transfer.
20 RD input Read data input, where low enables the parallel data output and high disables it; the datasheet also states it is to be connected to BGND.
21 CONVST_C input In hardware mode the rising edge starts simultaneous conversion of channel pair C (CH_C[1:0]); in software mode it is used only in sequential mode and otherwise tied to BGND or BVDD.
22 CONVST_B input In hardware mode the rising edge starts simultaneous conversion of channel pair B (CH_B[1:0]); in software mode it is used only in sequential mode and otherwise tied to BGND or BVDD.
23 CONVST_A input In hardware mode the rising edge starts simultaneous conversion of channel pair A (CH_A[1:0]); in software mode it starts all selected channels except in sequential mode, where it starts pair A only.
24 STBY input Standby input, where low powers down the entire device including the internal clock and reference and high selects normal operation.
25 AGND power_in Analog ground, to be connected to the analog ground plane; it may use a dedicated ground only if its potential stays within ±300 mV of AGND.
26 AVDD power_in Analog supply at 4.5 V to 5.5 V, decoupled to AGND with a 100-nF ceramic capacitor plus a 10-µF capacitor; it may use a dedicated supply only if within ±300 mV of AVDD.
27 RANGE/XCLK bidirectional In hardware mode it selects the input range (low for ±4 VREF, high for ±2 VREF); in software mode it is the external conversion clock input or internal clock output, otherwise tied to BVDD or BGND.
28 RESET input Active-high reset that aborts ongoing conversions and resets the control register to 0x000003FF, requiring a pulse at least 50 ns long.
29 WORD/BYTE input Output mode select, where low selects word mode on DB[15:0] and high selects byte mode on DB[15:8] with byte order set by HBEN; the datasheet also states it is to be connected to BGND.
30 HVSS power_in Negative supply for the analog inputs, specified from -16.5 V to -5 V, decoupled to AGND with 100 nF and 10 µF.
31 HVDD power_in Positive supply for the analog inputs, specified from 5 V to 16.5 V, decoupled to AGND with 100 nF and 10 µF.
32 AGND power_in Analog ground, to be connected to the analog ground plane.
33 CH_A0 passive Analog input of channel A0 whose input range is set by the RANGE pin in hardware mode or by CR bit C26 (RANGE_A) in software mode.
34 AVDD power_in Analog supply, 4.5 V to 5.5 V, to be decoupled to AGND.
35 AVDD power_in Analog supply, 4.5 V to 5.5 V, to be decoupled to AGND.
36 CH_A1 passive Analog input of channel A1 whose input range is set by the RANGE pin in hardware mode or by CR bit C26 (RANGE_A) in software mode.
37 AGND power_in Analog ground, to be connected to the analog ground plane.
38 AGND power_in Analog ground, to be connected to the analog ground plane.
39 CH_B0 passive Analog input of channel B0 whose input range is set by the RANGE pin in hardware mode or by CR bit C27 (RANGE_B) in software mode.
40 AVDD power_in Analog supply, 4.5 V to 5.5 V, to be decoupled to AGND.
41 AVDD power_in Analog supply, 4.5 V to 5.5 V, to be decoupled to AGND.
42 CH_B1 passive Analog input of channel B1 whose input range is set by the RANGE pin in hardware mode or by CR bit C27 (RANGE_B) in software mode.
43 AGND power_in Analog ground, to be connected to the analog ground plane.
44 AGND power_in Analog ground, to be connected to the analog ground plane.
45 CH_C0 passive Analog input of channel C0 whose input range is set by the RANGE pin in hardware mode or by CR bit C28 (RANGE_C) in software mode.
46 AVDD power_in Analog supply, 4.5 V to 5.5 V, to be decoupled to AGND.
47 AVDD power_in Analog supply, 4.5 V to 5.5 V, to be decoupled to AGND.
48 CH_C1 passive Analog input of channel C1 whose input range is set by the RANGE pin in hardware mode or by CR bit C28 (RANGE_C) in software mode.
49 AGND power_in Analog ground, to be connected to the analog ground plane.
50 AVDD power_in Analog supply, 4.5 V to 5.5 V, to be decoupled to AGND.
51 REFIO passive Reference voltage input/output from 0.5 V to 3.025 V, with the internal reference enabled by REFEN/WR or CR bit C25, requiring a 470-nF decoupling capacitor to pin 52.
52 AGND power_in Analog ground, to be connected to the analog ground plane and used as the return for the 470-nF REFIO capacitor.
53 AGND power_in Analog ground, to be connected to the analog ground plane and used as the return for the REFC_A 10-µF capacitor.
54 REFC_A passive Decoupling capacitor node for the channel A reference, requiring a 10-µF ceramic capacitor to pin 53.
55 AGND power_in Analog ground, to be connected to the analog ground plane and used as the return for the REFC_B 10-µF capacitor.
56 REFC_B passive Decoupling capacitor node for the channel B reference, requiring a 10-µF ceramic capacitor to pin 55.
57 AGND power_in Analog ground, to be connected to the analog ground plane and used as the return for the REFC_C 10-µF capacitor.
58 REFC_C passive Decoupling capacitor node for the channel C reference, requiring a 10-µF ceramic capacitor to pin 57.
59 AGND power_in Analog ground, to be connected to the analog ground plane.
60 AVDD power_in Analog supply, 4.5 V to 5.5 V, to be decoupled to AGND.
61 PAR/SER input Interface mode select, where low selects the parallel interface and high enables the serial interface.
62 HW/SW input Mode select, where low selects hardware mode (external pin control) and high selects software mode (control register configuration).
63 REFEN/WR input In hardware mode it enables the internal reference when high and requires an external reference at REFIO when low; in software mode it is the parallel write input, enabled when CS and WR are low.
64 DB15 bidirectional Data bit 15 (MSB) input/output in parallel mode, which must be connected to BGND.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package LQFP-64(10x10)
Category ADC/DAC/Data Conversion
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Integral linearity error (At TA = -40°C to 85°C) INL -3 1.5 3 LSB At TA = -40°C to 85°C 8
Integral linearity error (At TA = -40°C to 125°C) INL -4 1.5 4 LSB At TA = -40°C to 125°C 8
Differential linearity error (At TA = -40°C to 85°C) DNL -1 0.75 1.5 LSB At TA = -40°C to 85°C 8
Differential linearity error (At TA = -40°C to 125°C) DNL -1 0.75 2 LSB At TA = -40°C to 125°C 8
Offset error -4 0.8 4 mV 8
Gain error -0.75 0.25 0.75 %FSR Referenced to voltage at REFIO 8
Gain error drift -6 6 ppm/°C Referenced to voltage at REFIO 8
Power-supply rejection ratio PSRR 60 dB At output code FFFFh, related to AVDD 8
Acquisition time tACQ 280 ns 8
Conversion time per ADC tCONV 1.26 μs 8
Throughput rate, parallel interface (internal clock and reference) fDATA 630 kSPS 8
Throughput rate, serial interface (internal clock and reference) fDATA 450 kSPS 8
Signal-to-noise ratio (TA = -40°C to 85°C) SNR 90 91.5 dB At fIN = 10 kHz, TA = -40°C to 85°C 8
Signal-to-noise ratio (TA = -40°C to 125°C) SNR 89 91.5 dB At fIN = 10 kHz, TA = -40°C to 125°C 8
Signal-to-noise ratio + distortion (TA = -40°C to 85°C) SINAD 87 89.5 dB At fIN = 10 kHz, TA = -40°C to 85°C 8
Signal-to-noise ratio + distortion (TA = -40°C to 125°C) SINAD 86.5 89.5 dB At fIN = 10 kHz, TA = -40°C to 125°C 8
Total harmonic distortion (TA = -40°C to 85°C) THD -94 -90 dB At fIN = 10 kHz, TA = -40°C to 85°C 8
Total harmonic distortion (TA = -40°C to 125°C) THD -94 -89.5 dB At fIN = 10 kHz, TA = -40°C to 125°C 8
Spurious-free dynamic range (TA = -40°C to 85°C) SFDR 90 95 dB At fIN = 10 kHz, TA = -40°C to 85°C 8
Spurious-free dynamic range (TA = -40°C to 125°C) SFDR 89.5 95 dB At fIN = 10 kHz, TA = -40°C to 125°C 8
Input leakage current -1 1 μA No ongoing conversion 8
External clock frequency fXCLK 1 18 20 MHz An external reference must be used for fXCLK > fCCLK 8
Reference voltage, 2.5-V operation VREF 2.485 2.5 2.515 V 2.5-V operation, REFDAC = 0x3FF 9
Reference voltage, 2.5-V operation at 25°C VREF 2.496 2.5 2.504 V 2.5-V operation, REFDAC = 0x3FF at 25°C 9
Reference voltage, 3-V operation VREF 2.985 3 3.015 V 3-V operation, REFDAC = 0x3FF 9
Reference voltage, 3-V operation at 25°C VREF 2.995 3 3.005 V 3-V operation, REFDAC = 0x3FF at 25°C 9
Reference voltage drift dVREF/dT -10 10 ppm/°C 9
Output current IREFOUT -2 2 mA With dc current 9
External load capacitance at CREF_x pins 4.7 10 μF At CREF_x pins 9
External load capacitance at REFIO pins 100 470 nF At REFIO pins 9
REFDAC differential nonlinearity DNLDAC -1 0.1 1 LSB 9
REFDAC integral nonlinearity INLDAC -2 0.1 2 LSB 9
Reference input voltage VREFIN 0.5 2.5 3.025 V 9
Serial clock input frequency fSCLK 0.1 36 MHz 9
Serial clock period tSCLK 0.0278 10 μs 9
Analog supply current, fDATA = maximum IAVDD 30 36 mA fDATA = maximum 10
Analog supply current, power-down mode IAVDD 0.1 50 μA Power-down mode 10
Buffer I/O supply current, fDATA = maximum IBVDD 0.9 2 mA fDATA = maximum 10
Input positive supply current, fDATA = maximum IHVDD 3 3.5 mA fDATA = maximum 10
Input negative supply current, fDATA = maximum IHVSS 3.6 4 mA fDATA = maximum 10
Power dissipation, fDATA = maximum 251.7 298.5 mW fDATA = maximum 10
Supply voltage, AVDD to AGND AVDD 4.5 5 5.5 V 7
Supply voltage, BVDD to BGND (low-voltage levels) BVDD 2.7 3 3.6 V Low-voltage levels 7
Supply voltage, BVDD to BGND (5-V logic levels) BVDD 4.5 5 5.5 V 5-V logic levels 7
Input supply voltage, HVDD to AGND (input range ±2 × VREF) HVDD 16.5 V Input range = ±2 × VREF 7
Input supply voltage, HVDD to AGND (input range ±4 × VREF) HVDD 16.5 V Input range = ±4 × VREF 7
Input supply voltage, HVSS to AGND (input range ±2 × VREF) HVSS -16.5 V Input range = ±2 × VREF 7
Input supply voltage, HVSS to AGND (input range ±4 × VREF) HVSS -16.5 V Input range = ±4 × VREF 7
Reference input voltage (VREF) VREF 0.5 2.5 3 V 7
Operating ambient temperature TA -40 125 °C 7
Supply voltage, HVDD to AGND -0.3 18 V 6
Supply voltage, HVSS to AGND -18 0.3 V 6
Supply voltage, AVDD to AGND AVDD -0.3 6 V 6
Supply voltage, BVDD to BGND BVDD -0.3 6 V 6
Ground voltage difference, AGND to BGND -0.3 0.3 V 6
Input current to all pins except supply -10 10 mA 6
Maximum virtual junction temperature TJ 150 °C 6
Storage temperature Tstg -65 150 °C 6
Junction-to-ambient thermal resistance RθJA 48 °C/W 7
Junction-to-case (top) thermal resistance RθJC(top) 16 °C/W 7

CAD (KiCad official)

  • Symbol: ADS8555SPMR
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: ads8555spmr-etched.step / ads8555spmr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ads8555spmr.step / ads8555spmr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (46 pp, sha256 567981dd43158a85, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF