component
ADS8555SPMR
Public Made by Adomby adom
Texas Instruments Analog To Digital Converters (ADCs), LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
ADS8555SPMR
Texas Instruments · Analog To Digital Converters (ADCs) · LQFP-64(10x10)
ADS8555SPMR from Texas Instruments, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DB14/REFBUFEN | bidirectional | In parallel mode with HW/SW low, this is data bit 14 and the reference buffer enable input, which must be low to enable all reference buffers when the internal reference is used; in software mode it must be tied to BGND or BVDD. |
| 2 | DB13/SDI | bidirectional | Data bit 13 I/O in parallel mode; in hardware mode it must be connected to BGND, and in software mode it is the serial data input SDI. |
| 3 | DB12 | bidirectional | Data bit 12 input/output in parallel mode, which must be connected to BGND. |
| 4 | DB11 | bidirectional | Data bit 11 input/output in parallel mode, which must be connected to BGND. |
| 5 | DB10/SDO_C | bidirectional | Data bit 10 input/output, which is the data output for channel C when SEL_C = 1 and must be tied to BGND when SEL_C = 0. |
| 6 | DB9/SDO_B | bidirectional | Data bit 9 input/output, which is the data output for channel B when SEL_B = 1 and must be tied to BGND when SEL_B = 0; when SEL_C = 0, channel C1 data are also available on this output. |
| 7 | DB8/SDO_A | bidirectional | Data bit 8 input/output and data output for channel A; when SEL_C = 0, channel C0 data are also available here, and when SEL_C = 0 and SEL_B = 0 it is the single data output for all channels. |
| 8 | BGND | power_in | Buffer I/O ground, to be connected to the digital ground plane. |
| 9 | BVDD | power_in | Buffer I/O supply, to be connected to the digital supply at 2.7 V to 5.5 V and decoupled to BGND with a 1-µF ceramic capacitor or a 100-nF plus 10-µF combination. |
| 10 | DB7/HBEN/DCEN | bidirectional | In word mode this is data bit 7 and the daisy-chain enable (high enables DB[5:3] as DCIN inputs, otherwise tie to BGND); in byte mode it is the high-byte enable that sets the output byte order. |
| 11 | DB6/SCLK | bidirectional | In word mode this is data bit 6 and the serial interface clock input, rated 36 MHz max; in byte mode it must be connected to BGND or BVDD. |
| 12 | DB5/DCIN_A | bidirectional | In word mode this is data bit 5 and the daisy-chain data input for channel A when DCEN = 1; in byte mode it is connected to BGND when DCEN = 0. |
| 13 | DB4/DCIN_B | bidirectional | In word mode this is data bit 4 and the daisy-chain data input for channel B when SEL_B = 1 and DCEN = 1; in byte mode it is connected to BGND when DCEN = 0. |
| 14 | DB3/DCIN_C | bidirectional | In word mode this is data bit 3 and the daisy-chain data input for channel C when SEL_C = 1 and DCEN = 1; in byte mode it is connected to BGND when DCEN = 0. |
| 15 | DB2/SEL_C | bidirectional | In word mode this is data bit 2 and the select input for SDO_C, which is active when high and disabled when low; in byte mode it must be connected to BGND or BVDD. |
| 16 | DB1/SEL_B | bidirectional | In word mode this is data bit 1 and the select input for SDO_B, which is active when high and disabled when low; in byte mode it must be connected to BGND or BVDD. |
| 17 | DB0/SEL_A | bidirectional | In word mode this is data bit 0 (LSB) and the select input for SDO_A, which is active when high and disabled when low; in byte mode the datasheet states it must always be high. |
| 18 | BUSY/INT | output | With CR bit C21 = 0 it is the converter busy output, high during conversion and low once all six channels are latched, and with C21 = 1 it is an interrupt output that goes low on the first read access; polarity is set by C20. |
| 19 | CS/FS | input | Chip select input, where low enables the parallel interface and high disables it; in serial mode the falling edge of FS controls the frame transfer. |
| 20 | RD | input | Read data input, where low enables the parallel data output and high disables it; the datasheet also states it is to be connected to BGND. |
| 21 | CONVST_C | input | In hardware mode the rising edge starts simultaneous conversion of channel pair C (CH_C[1:0]); in software mode it is used only in sequential mode and otherwise tied to BGND or BVDD. |
| 22 | CONVST_B | input | In hardware mode the rising edge starts simultaneous conversion of channel pair B (CH_B[1:0]); in software mode it is used only in sequential mode and otherwise tied to BGND or BVDD. |
| 23 | CONVST_A | input | In hardware mode the rising edge starts simultaneous conversion of channel pair A (CH_A[1:0]); in software mode it starts all selected channels except in sequential mode, where it starts pair A only. |
| 24 | STBY | input | Standby input, where low powers down the entire device including the internal clock and reference and high selects normal operation. |
| 25 | AGND | power_in | Analog ground, to be connected to the analog ground plane; it may use a dedicated ground only if its potential stays within ±300 mV of AGND. |
| 26 | AVDD | power_in | Analog supply at 4.5 V to 5.5 V, decoupled to AGND with a 100-nF ceramic capacitor plus a 10-µF capacitor; it may use a dedicated supply only if within ±300 mV of AVDD. |
| 27 | RANGE/XCLK | bidirectional | In hardware mode it selects the input range (low for ±4 VREF, high for ±2 VREF); in software mode it is the external conversion clock input or internal clock output, otherwise tied to BVDD or BGND. |
| 28 | RESET | input | Active-high reset that aborts ongoing conversions and resets the control register to 0x000003FF, requiring a pulse at least 50 ns long. |
| 29 | WORD/BYTE | input | Output mode select, where low selects word mode on DB[15:0] and high selects byte mode on DB[15:8] with byte order set by HBEN; the datasheet also states it is to be connected to BGND. |
| 30 | HVSS | power_in | Negative supply for the analog inputs, specified from -16.5 V to -5 V, decoupled to AGND with 100 nF and 10 µF. |
| 31 | HVDD | power_in | Positive supply for the analog inputs, specified from 5 V to 16.5 V, decoupled to AGND with 100 nF and 10 µF. |
| 32 | AGND | power_in | Analog ground, to be connected to the analog ground plane. |
| 33 | CH_A0 | passive | Analog input of channel A0 whose input range is set by the RANGE pin in hardware mode or by CR bit C26 (RANGE_A) in software mode. |
| 34 | AVDD | power_in | Analog supply, 4.5 V to 5.5 V, to be decoupled to AGND. |
| 35 | AVDD | power_in | Analog supply, 4.5 V to 5.5 V, to be decoupled to AGND. |
| 36 | CH_A1 | passive | Analog input of channel A1 whose input range is set by the RANGE pin in hardware mode or by CR bit C26 (RANGE_A) in software mode. |
| 37 | AGND | power_in | Analog ground, to be connected to the analog ground plane. |
| 38 | AGND | power_in | Analog ground, to be connected to the analog ground plane. |
| 39 | CH_B0 | passive | Analog input of channel B0 whose input range is set by the RANGE pin in hardware mode or by CR bit C27 (RANGE_B) in software mode. |
| 40 | AVDD | power_in | Analog supply, 4.5 V to 5.5 V, to be decoupled to AGND. |
| 41 | AVDD | power_in | Analog supply, 4.5 V to 5.5 V, to be decoupled to AGND. |
| 42 | CH_B1 | passive | Analog input of channel B1 whose input range is set by the RANGE pin in hardware mode or by CR bit C27 (RANGE_B) in software mode. |
| 43 | AGND | power_in | Analog ground, to be connected to the analog ground plane. |
| 44 | AGND | power_in | Analog ground, to be connected to the analog ground plane. |
| 45 | CH_C0 | passive | Analog input of channel C0 whose input range is set by the RANGE pin in hardware mode or by CR bit C28 (RANGE_C) in software mode. |
| 46 | AVDD | power_in | Analog supply, 4.5 V to 5.5 V, to be decoupled to AGND. |
| 47 | AVDD | power_in | Analog supply, 4.5 V to 5.5 V, to be decoupled to AGND. |
| 48 | CH_C1 | passive | Analog input of channel C1 whose input range is set by the RANGE pin in hardware mode or by CR bit C28 (RANGE_C) in software mode. |
| 49 | AGND | power_in | Analog ground, to be connected to the analog ground plane. |
| 50 | AVDD | power_in | Analog supply, 4.5 V to 5.5 V, to be decoupled to AGND. |
| 51 | REFIO | passive | Reference voltage input/output from 0.5 V to 3.025 V, with the internal reference enabled by REFEN/WR or CR bit C25, requiring a 470-nF decoupling capacitor to pin 52. |
| 52 | AGND | power_in | Analog ground, to be connected to the analog ground plane and used as the return for the 470-nF REFIO capacitor. |
| 53 | AGND | power_in | Analog ground, to be connected to the analog ground plane and used as the return for the REFC_A 10-µF capacitor. |
| 54 | REFC_A | passive | Decoupling capacitor node for the channel A reference, requiring a 10-µF ceramic capacitor to pin 53. |
| 55 | AGND | power_in | Analog ground, to be connected to the analog ground plane and used as the return for the REFC_B 10-µF capacitor. |
| 56 | REFC_B | passive | Decoupling capacitor node for the channel B reference, requiring a 10-µF ceramic capacitor to pin 55. |
| 57 | AGND | power_in | Analog ground, to be connected to the analog ground plane and used as the return for the REFC_C 10-µF capacitor. |
| 58 | REFC_C | passive | Decoupling capacitor node for the channel C reference, requiring a 10-µF ceramic capacitor to pin 57. |
| 59 | AGND | power_in | Analog ground, to be connected to the analog ground plane. |
| 60 | AVDD | power_in | Analog supply, 4.5 V to 5.5 V, to be decoupled to AGND. |
| 61 | PAR/SER | input | Interface mode select, where low selects the parallel interface and high enables the serial interface. |
| 62 | HW/SW | input | Mode select, where low selects hardware mode (external pin control) and high selects software mode (control register configuration). |
| 63 | REFEN/WR | input | In hardware mode it enables the internal reference when high and requires an external reference at REFIO when low; in software mode it is the parallel write input, enabled when CS and WR are low. |
| 64 | DB15 | bidirectional | Data bit 15 (MSB) input/output in parallel mode, which must be connected to BGND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-64(10x10) |
| Category | ADC/DAC/Data Conversion |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Integral linearity error (At TA = -40°C to 85°C) | INL | -3 | 1.5 | 3 | LSB | At TA = -40°C to 85°C | 8 |
| Integral linearity error (At TA = -40°C to 125°C) | INL | -4 | 1.5 | 4 | LSB | At TA = -40°C to 125°C | 8 |
| Differential linearity error (At TA = -40°C to 85°C) | DNL | -1 | 0.75 | 1.5 | LSB | At TA = -40°C to 85°C | 8 |
| Differential linearity error (At TA = -40°C to 125°C) | DNL | -1 | 0.75 | 2 | LSB | At TA = -40°C to 125°C | 8 |
| Offset error | -4 | 0.8 | 4 | mV | 8 | ||
| Gain error | -0.75 | 0.25 | 0.75 | %FSR | Referenced to voltage at REFIO | 8 | |
| Gain error drift | -6 | 6 | ppm/°C | Referenced to voltage at REFIO | 8 | ||
| Power-supply rejection ratio | PSRR | 60 | dB | At output code FFFFh, related to AVDD | 8 | ||
| Acquisition time | tACQ | 280 | ns | 8 | |||
| Conversion time per ADC | tCONV | 1.26 | μs | 8 | |||
| Throughput rate, parallel interface (internal clock and reference) | fDATA | 630 | kSPS | 8 | |||
| Throughput rate, serial interface (internal clock and reference) | fDATA | 450 | kSPS | 8 | |||
| Signal-to-noise ratio (TA = -40°C to 85°C) | SNR | 90 | 91.5 | dB | At fIN = 10 kHz, TA = -40°C to 85°C | 8 | |
| Signal-to-noise ratio (TA = -40°C to 125°C) | SNR | 89 | 91.5 | dB | At fIN = 10 kHz, TA = -40°C to 125°C | 8 | |
| Signal-to-noise ratio + distortion (TA = -40°C to 85°C) | SINAD | 87 | 89.5 | dB | At fIN = 10 kHz, TA = -40°C to 85°C | 8 | |
| Signal-to-noise ratio + distortion (TA = -40°C to 125°C) | SINAD | 86.5 | 89.5 | dB | At fIN = 10 kHz, TA = -40°C to 125°C | 8 | |
| Total harmonic distortion (TA = -40°C to 85°C) | THD | -94 | -90 | dB | At fIN = 10 kHz, TA = -40°C to 85°C | 8 | |
| Total harmonic distortion (TA = -40°C to 125°C) | THD | -94 | -89.5 | dB | At fIN = 10 kHz, TA = -40°C to 125°C | 8 | |
| Spurious-free dynamic range (TA = -40°C to 85°C) | SFDR | 90 | 95 | dB | At fIN = 10 kHz, TA = -40°C to 85°C | 8 | |
| Spurious-free dynamic range (TA = -40°C to 125°C) | SFDR | 89.5 | 95 | dB | At fIN = 10 kHz, TA = -40°C to 125°C | 8 | |
| Input leakage current | -1 | 1 | μA | No ongoing conversion | 8 | ||
| External clock frequency | fXCLK | 1 | 18 | 20 | MHz | An external reference must be used for fXCLK > fCCLK | 8 |
| Reference voltage, 2.5-V operation | VREF | 2.485 | 2.5 | 2.515 | V | 2.5-V operation, REFDAC = 0x3FF | 9 |
| Reference voltage, 2.5-V operation at 25°C | VREF | 2.496 | 2.5 | 2.504 | V | 2.5-V operation, REFDAC = 0x3FF at 25°C | 9 |
| Reference voltage, 3-V operation | VREF | 2.985 | 3 | 3.015 | V | 3-V operation, REFDAC = 0x3FF | 9 |
| Reference voltage, 3-V operation at 25°C | VREF | 2.995 | 3 | 3.005 | V | 3-V operation, REFDAC = 0x3FF at 25°C | 9 |
| Reference voltage drift | dVREF/dT | -10 | 10 | ppm/°C | 9 | ||
| Output current | IREFOUT | -2 | 2 | mA | With dc current | 9 | |
| External load capacitance at CREF_x pins | 4.7 | 10 | μF | At CREF_x pins | 9 | ||
| External load capacitance at REFIO pins | 100 | 470 | nF | At REFIO pins | 9 | ||
| REFDAC differential nonlinearity | DNLDAC | -1 | 0.1 | 1 | LSB | 9 | |
| REFDAC integral nonlinearity | INLDAC | -2 | 0.1 | 2 | LSB | 9 | |
| Reference input voltage | VREFIN | 0.5 | 2.5 | 3.025 | V | 9 | |
| Serial clock input frequency | fSCLK | 0.1 | 36 | MHz | 9 | ||
| Serial clock period | tSCLK | 0.0278 | 10 | μs | 9 | ||
| Analog supply current, fDATA = maximum | IAVDD | 30 | 36 | mA | fDATA = maximum | 10 | |
| Analog supply current, power-down mode | IAVDD | 0.1 | 50 | μA | Power-down mode | 10 | |
| Buffer I/O supply current, fDATA = maximum | IBVDD | 0.9 | 2 | mA | fDATA = maximum | 10 | |
| Input positive supply current, fDATA = maximum | IHVDD | 3 | 3.5 | mA | fDATA = maximum | 10 | |
| Input negative supply current, fDATA = maximum | IHVSS | 3.6 | 4 | mA | fDATA = maximum | 10 | |
| Power dissipation, fDATA = maximum | 251.7 | 298.5 | mW | fDATA = maximum | 10 | ||
| Supply voltage, AVDD to AGND | AVDD | 4.5 | 5 | 5.5 | V | 7 | |
| Supply voltage, BVDD to BGND (low-voltage levels) | BVDD | 2.7 | 3 | 3.6 | V | Low-voltage levels | 7 |
| Supply voltage, BVDD to BGND (5-V logic levels) | BVDD | 4.5 | 5 | 5.5 | V | 5-V logic levels | 7 |
| Input supply voltage, HVDD to AGND (input range ±2 × VREF) | HVDD | 16.5 | V | Input range = ±2 × VREF | 7 | ||
| Input supply voltage, HVDD to AGND (input range ±4 × VREF) | HVDD | 16.5 | V | Input range = ±4 × VREF | 7 | ||
| Input supply voltage, HVSS to AGND (input range ±2 × VREF) | HVSS | -16.5 | V | Input range = ±2 × VREF | 7 | ||
| Input supply voltage, HVSS to AGND (input range ±4 × VREF) | HVSS | -16.5 | V | Input range = ±4 × VREF | 7 | ||
| Reference input voltage (VREF) | VREF | 0.5 | 2.5 | 3 | V | 7 | |
| Operating ambient temperature | TA | -40 | 125 | °C | 7 | ||
| Supply voltage, HVDD to AGND | -0.3 | 18 | V | 6 | |||
| Supply voltage, HVSS to AGND | -18 | 0.3 | V | 6 | |||
| Supply voltage, AVDD to AGND | AVDD | -0.3 | 6 | V | 6 | ||
| Supply voltage, BVDD to BGND | BVDD | -0.3 | 6 | V | 6 | ||
| Ground voltage difference, AGND to BGND | -0.3 | 0.3 | V | 6 | |||
| Input current to all pins except supply | -10 | 10 | mA | 6 | |||
| Maximum virtual junction temperature | TJ | 150 | °C | 6 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| Junction-to-ambient thermal resistance | RθJA | 48 | °C/W | 7 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 16 | °C/W | 7 |
CAD (KiCad official)
- Symbol:
ADS8555SPMR - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
ads8555spmr-etched.step/ads8555spmr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ads8555spmr.step/ads8555spmr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (46 pp, sha256
567981dd43158a85, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).