main
Ray
Publish 0.1.0
f427d9a
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314
{
"slug": "ads8509ibdw",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Analog To Digital Converters (ADCs), SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"data converters",
"ads8509ibdw",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ads8509ibdw.kicad_sym",
"ads8509ibdw.kicad_mod",
"ads8509ibdw.glb",
"ads8509ibdw.step",
"ads8509ibdw.lbr",
"docs/hero.png",
"docs/ads8509ibdw-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ads8509ibdw-hero.glb",
"ads8509ibdw-hero.overlay.json",
"ads8509ibdw-etched.glb"
],
"component": {
"mpn": "ADS8509IBDW",
"manufacturer": "Texas Instruments",
"package": "SOIC-20-300mil",
"pin_count": 20,
"category": "Data Converters",
"subcategory": "Analog To Digital Converters (ADCs)",
"datasheet": "https://www.ti.com/lit/ds/symlink/ads8509ibdw.pdf",
"parts": {
"symbol": "ads8509ibdw.kicad_sym",
"footprint": "ads8509ibdw.kicad_mod",
"model_3d": "ads8509ibdw-hero.glb",
"model_3d_plain": "ads8509ibdw-etched.glb",
"model_3d_step": "ads8509ibdw-etched.step",
"model_3d_step_plain": "ads8509ibdw.step",
"lbr": "ads8509ibdw.lbr"
},
"distributor_links": {
"lcsc": "C1542659",
"digikey": "296-18085-5-ND",
"mouser": "595-ADS8509IBDW"
},
"distributor_check": {
"checked_at": "2026-11-12T07:25:58Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-18085-5-ND",
"status": "found"
},
"mouser": {
"pn": "595-ADS8509IBDW",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "R1IN",
"type": "input",
"description": "Analog input; see Table 2 of the datasheet for input range connections."
},
{
"number": "2",
"name": "AGND1",
"type": "power_in",
"description": "Analog ground used internally as the ground reference point, with minimal current flow."
},
{
"number": "3",
"name": "R2IN",
"type": "input",
"description": "Analog input; see Table 2 of the datasheet for input range connections."
},
{
"number": "4",
"name": "R3IN",
"type": "input",
"description": "Analog input; see Table 2 of the datasheet for input range connections."
},
{
"number": "5",
"name": "CAP",
"type": "passive",
"description": "Reference buffer capacitor, specified as 2.2-mF tantalum to ground (value as printed in the datasheet)."
},
{
"number": "6",
"name": "REF",
"type": "bidirectional",
"description": "Reference input/output; outputs the internal 2.5-V reference or can be driven by an external reference, and is bypassed to ground with a 2.2-mF tantalum capacitor."
},
{
"number": "7",
"name": "AGND2",
"type": "power_in",
"description": "Analog ground."
},
{
"number": "8",
"name": "SB/BTC",
"type": "input",
"description": "Selects straight binary output format when high and binary 2's complement output format when low."
},
{
"number": "9",
"name": "EXT/INT",
"type": "input",
"description": "Selects the data transmission clock: when high, data is synchronized to the DATACLK input; when low, a convert command initiates transmission of the previous conversion's data with 16 clock pulses output on DATACLK."
},
{
"number": "10",
"name": "DGND",
"type": "power_in",
"description": "Digital ground."
},
{
"number": "11",
"name": "SYNC",
"type": "output",
"description": "Sync output that supplies a data synchronization pulse when EXT is high and at least one external clock pulse has occurred while not in read mode."
},
{
"number": "12",
"name": "DATACLK",
"type": "bidirectional",
"description": "Input or output depending on EXT/INT level; output data is synchronized to this clock, and when EXT/INT is low it transmits 16 pulses after each conversion and stays low between conversions."
},
{
"number": "13",
"name": "DATA",
"type": "output",
"description": "Serial data output synchronized to DATACLK, with format set by SB/BTC; in external clock mode it outputs the TAG level after 16 bits while CS is low and R/C is high."
},
{
"number": "14",
"name": "TAG",
"type": "input",
"description": "Tag input for the external clock mode; when EXT is high, digital data from TAG is output on DATA with a delay that depends on the external clock mode."
},
{
"number": "15",
"name": "R/C",
"type": "input",
"description": "Read/convert input; with CS low, a falling edge puts the sample-and-hold into hold and starts a conversion, and also initiates data transmission when EXT/INT is low."
},
{
"number": "16",
"name": "CS",
"type": "input",
"description": "Chip select, internally ORed with R/C."
},
{
"number": "17",
"name": "BUSY",
"type": "output",
"description": "Busy output that falls when a conversion starts and remains low until the conversion is complete and the data is latched into the output shift register."
},
{
"number": "18",
"name": "PWRD",
"type": "input",
"description": "Power-down input; when high, conversions are inhibited and power consumption is significantly reduced, while previous results are maintained in the output shift register."
},
{
"number": "19",
"name": "VANA",
"type": "power_in",
"description": "Analog supply input, nominally +5 V (4.75 V to 5.25 V per electrical characteristics); connect directly to pin 20 and decouple to ground with 0.1-mF ceramic and 10-mF tantalum capacitors."
},
{
"number": "20",
"name": "VDIG",
"type": "power_in",
"description": "Digital supply input, nominally +5 V; connect directly to pin 19 and must be less than or equal to VANA."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pin mapping for the DW (SO-20) package was taken from the Terminal Functions table's DW NO. column, ; Capacitor values were extracted as '2.2-mF', '0.1-mF' and '10-mF'. These are almost certainly µF (te; The Terminal Functions table gives no DW pin number for the NC entries (they are listed only against"
],
"pages_sent": 10,
"cost_usd": 0.0046,
"at": "2026-11-12T07:25:50"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/ads8509ibdw.pdf",
"pages": 35,
"sha256": "862b91c3a8670e55",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 20,
"described": 20,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ads8509ibdw.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.3,
12.8,
2.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "59a10b341e6972b31d81802a048060326da627d8b92dcf4263064f4f62ec808e",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ads8509ibdw-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.3,
12.8,
2.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "d0c4a45bc65efec8b68874e93608f71e4524668af250dbb0eda884045cd5ad1e",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "DW0020A",
"source_page": 32,
"D": {
"nom_mm": 12.8,
"range_mm": [
12.6,
13.0
]
},
"E1": {
"nom_mm": 7.5,
"range_mm": [
7.4,
7.6
]
},
"E": {
"nom_mm": 10.3,
"range_mm": [
9.97,
10.63
]
},
"e": {
"nom_mm": 1.27,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 2.65,
"range_mm": [
null,
2.65
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "ads8509ibdw.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}