Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ADS8509IBDW

Texas Instruments · Analog To Digital Converters (ADCs) · SOIC-20-300mil

ADS8509IBDW from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 R1IN input Analog input; see Table 2 of the datasheet for input range connections.
2 AGND1 power_in Analog ground used internally as the ground reference point, with minimal current flow.
3 R2IN input Analog input; see Table 2 of the datasheet for input range connections.
4 R3IN input Analog input; see Table 2 of the datasheet for input range connections.
5 CAP passive Reference buffer capacitor, specified as 2.2-mF tantalum to ground (value as printed in the datasheet).
6 REF bidirectional Reference input/output; outputs the internal 2.5-V reference or can be driven by an external reference, and is bypassed to ground with a 2.2-mF tantalum capacitor.
7 AGND2 power_in Analog ground.
8 SB/BTC input Selects straight binary output format when high and binary 2's complement output format when low.
9 EXT/INT input Selects the data transmission clock: when high, data is synchronized to the DATACLK input; when low, a convert command initiates transmission of the previous conversion's data with 16 clock pulses output on DATACLK.
10 DGND power_in Digital ground.
11 SYNC output Sync output that supplies a data synchronization pulse when EXT is high and at least one external clock pulse has occurred while not in read mode.
12 DATACLK bidirectional Input or output depending on EXT/INT level; output data is synchronized to this clock, and when EXT/INT is low it transmits 16 pulses after each conversion and stays low between conversions.
13 DATA output Serial data output synchronized to DATACLK, with format set by SB/BTC; in external clock mode it outputs the TAG level after 16 bits while CS is low and R/C is high.
14 TAG input Tag input for the external clock mode; when EXT is high, digital data from TAG is output on DATA with a delay that depends on the external clock mode.
15 R/C input Read/convert input; with CS low, a falling edge puts the sample-and-hold into hold and starts a conversion, and also initiates data transmission when EXT/INT is low.
16 CS input Chip select, internally ORed with R/C.
17 BUSY output Busy output that falls when a conversion starts and remains low until the conversion is complete and the data is latched into the output shift register.
18 PWRD input Power-down input; when high, conversions are inhibited and power consumption is significantly reduced, while previous results are maintained in the output shift register.
19 VANA power_in Analog supply input, nominally +5 V (4.75 V to 5.25 V per electrical characteristics); connect directly to pin 20 and decouple to ground with 0.1-mF ceramic and 10-mF tantalum capacitors.
20 VDIG power_in Digital supply input, nominally +5 V; connect directly to pin 19 and must be less than or equal to VANA.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-20-300mil
Category Data Converters
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Analog input voltage R1IN R1IN -25 25 V Voltages with respect to network ground terminal 2
Analog input voltage R2IN R2IN -25 25 V Voltages with respect to network ground terminal 2
Analog input voltage R3IN R3IN -25 25 V Voltages with respect to network ground terminal 2
Ground voltage differences DGND, AGND2 -0.3 0.3 V 2
Analog supply VANA VANA 6 V 2
Digital supply VDIG VDIG 6 V 2
Digital inputs -0.3 V Printed as -0.3 V to +VDIG + 0.3 V; upper limit is an expression 2
Maximum junction temperature 165 °C 2
Storage temperature range -65 150 °C 2
Internal power dissipation 700 mW 2
Integral linearity error (ADS8509IB) INL -2 2 LSB 3
Differential linearity error (ADS8509IB) DNL -1 1 LSB 3
Full-scale error, ±10-V range, internal reference -0.5 0.5 %FSR Int. ref. with 0.1% external fixed resistors 3
Full-scale error, all other ranges, internal reference -0.5 0.5 %FSR Int. ref.; all other ranges 3
Full-scale error drift, internal reference -7 7 ppm/°C Int. ref. 3
Full-scale error, ±10-V range, external reference -0.5 0.5 %FSR Ext. ref. with 0.1% external fixed resistors 3
Full-scale error, all other ranges, external reference -0.5 0.5 %FSR Ext. ref.; all other ranges 3
Full-scale error drift, external reference -2 2 ppm/°C Ext. ref. 3
Bipolar zero error (ADS8509IB) -5 5 mV 3
Bipolar zero error drift -0.4 0.4 ppm/°C 3
Unipolar zero error, 10-V range (ADS8509IB) -5 5 mV 10-V range 3
Unipolar zero error, 4-V and 5-V range (ADS8509IB) -3 3 mV 4-V and 5-V range 3
Unipolar zero error drift -2 2 ppm/°C 3
Power supply sensitivity -8 8 LSB +4.75 V < VD < +5.25 V (VDIG = VANA = VD) 3
Spurious-free dynamic range (ADS8509IB) SFDR 95 99 dB fI = 20 kHz 3
Total harmonic distortion (ADS8509IB) THD -98 -93 dB fI = 20 kHz 3
Signal-to-(noise+distortion) (ADS8509IB) SINAD 85 88 dB fI = 20 kHz 3
Signal-to-noise ratio (ADS8509IB) SNR 86 88 dB fI = 20 kHz 3
Internal reference voltage 2.48 2.5 2.52 V No load 4
External reference voltage range 2.3 2.5 2.7 V For specified linearity 4
Low-level input voltage VIL -0.3 0.8 V 4
High-level input voltage VIH 2 V 4
Low-level input current IIL -10 10 mA VIL = 0 V 4
High-level input current IIH -10 10 mA VIH = 5 V 4
External data clock frequency 0.1 26 MHz EXT/INT High; can run continually but not recommended for optimum performance 4
Hi-Z state leakage current -5 5 mA VOUT = 0 V to VDIG 4
Digital supply voltage VDIG VDIG 4.75 5 5.25 V 4
Analog supply voltage VANA VANA 4.75 5 5.25 V 4
Power dissipation, PWRD low 70 100 mW PWRD Low; fS = 250 kHz 4
Specified performance temperature range -40 85 °C 4
Derated performance temperature range -55 125 °C Derated performance 4
Thermal resistance junction-to-ambient, SO package qJA 46 °C/W SO package 4

CAD (KiCad official)

  • Symbol: ADS8509IBDW
  • Footprint: Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm
  • 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
  • 3D model files: ads8509ibdw-etched.step / ads8509ibdw-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ads8509ibdw.step / ads8509ibdw.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (35 pp, sha256 862b91c3a8670e55, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF