main
Ray
Publish 0.1.0
f427d9a
ADS8509IBDW
Texas Instruments · Analog To Digital Converters (ADCs) · SOIC-20-300mil
ADS8509IBDW from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | R1IN | input | Analog input; see Table 2 of the datasheet for input range connections. |
| 2 | AGND1 | power_in | Analog ground used internally as the ground reference point, with minimal current flow. |
| 3 | R2IN | input | Analog input; see Table 2 of the datasheet for input range connections. |
| 4 | R3IN | input | Analog input; see Table 2 of the datasheet for input range connections. |
| 5 | CAP | passive | Reference buffer capacitor, specified as 2.2-mF tantalum to ground (value as printed in the datasheet). |
| 6 | REF | bidirectional | Reference input/output; outputs the internal 2.5-V reference or can be driven by an external reference, and is bypassed to ground with a 2.2-mF tantalum capacitor. |
| 7 | AGND2 | power_in | Analog ground. |
| 8 | SB/BTC | input | Selects straight binary output format when high and binary 2's complement output format when low. |
| 9 | EXT/INT | input | Selects the data transmission clock: when high, data is synchronized to the DATACLK input; when low, a convert command initiates transmission of the previous conversion's data with 16 clock pulses output on DATACLK. |
| 10 | DGND | power_in | Digital ground. |
| 11 | SYNC | output | Sync output that supplies a data synchronization pulse when EXT is high and at least one external clock pulse has occurred while not in read mode. |
| 12 | DATACLK | bidirectional | Input or output depending on EXT/INT level; output data is synchronized to this clock, and when EXT/INT is low it transmits 16 pulses after each conversion and stays low between conversions. |
| 13 | DATA | output | Serial data output synchronized to DATACLK, with format set by SB/BTC; in external clock mode it outputs the TAG level after 16 bits while CS is low and R/C is high. |
| 14 | TAG | input | Tag input for the external clock mode; when EXT is high, digital data from TAG is output on DATA with a delay that depends on the external clock mode. |
| 15 | R/C | input | Read/convert input; with CS low, a falling edge puts the sample-and-hold into hold and starts a conversion, and also initiates data transmission when EXT/INT is low. |
| 16 | CS | input | Chip select, internally ORed with R/C. |
| 17 | BUSY | output | Busy output that falls when a conversion starts and remains low until the conversion is complete and the data is latched into the output shift register. |
| 18 | PWRD | input | Power-down input; when high, conversions are inhibited and power consumption is significantly reduced, while previous results are maintained in the output shift register. |
| 19 | VANA | power_in | Analog supply input, nominally +5 V (4.75 V to 5.25 V per electrical characteristics); connect directly to pin 20 and decouple to ground with 0.1-mF ceramic and 10-mF tantalum capacitors. |
| 20 | VDIG | power_in | Digital supply input, nominally +5 V; connect directly to pin 19 and must be less than or equal to VANA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-20-300mil |
| Category | Data Converters |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Analog input voltage R1IN | R1IN | -25 | 25 | V | Voltages with respect to network ground terminal | 2 | |
| Analog input voltage R2IN | R2IN | -25 | 25 | V | Voltages with respect to network ground terminal | 2 | |
| Analog input voltage R3IN | R3IN | -25 | 25 | V | Voltages with respect to network ground terminal | 2 | |
| Ground voltage differences DGND, AGND2 | -0.3 | 0.3 | V | 2 | |||
| Analog supply VANA | VANA | 6 | V | 2 | |||
| Digital supply VDIG | VDIG | 6 | V | 2 | |||
| Digital inputs | -0.3 | V | Printed as -0.3 V to +VDIG + 0.3 V; upper limit is an expression | 2 | |||
| Maximum junction temperature | 165 | °C | 2 | ||||
| Storage temperature range | -65 | 150 | °C | 2 | |||
| Internal power dissipation | 700 | mW | 2 | ||||
| Integral linearity error (ADS8509IB) | INL | -2 | 2 | LSB | 3 | ||
| Differential linearity error (ADS8509IB) | DNL | -1 | 1 | LSB | 3 | ||
| Full-scale error, ±10-V range, internal reference | -0.5 | 0.5 | %FSR | Int. ref. with 0.1% external fixed resistors | 3 | ||
| Full-scale error, all other ranges, internal reference | -0.5 | 0.5 | %FSR | Int. ref.; all other ranges | 3 | ||
| Full-scale error drift, internal reference | -7 | 7 | ppm/°C | Int. ref. | 3 | ||
| Full-scale error, ±10-V range, external reference | -0.5 | 0.5 | %FSR | Ext. ref. with 0.1% external fixed resistors | 3 | ||
| Full-scale error, all other ranges, external reference | -0.5 | 0.5 | %FSR | Ext. ref.; all other ranges | 3 | ||
| Full-scale error drift, external reference | -2 | 2 | ppm/°C | Ext. ref. | 3 | ||
| Bipolar zero error (ADS8509IB) | -5 | 5 | mV | 3 | |||
| Bipolar zero error drift | -0.4 | 0.4 | ppm/°C | 3 | |||
| Unipolar zero error, 10-V range (ADS8509IB) | -5 | 5 | mV | 10-V range | 3 | ||
| Unipolar zero error, 4-V and 5-V range (ADS8509IB) | -3 | 3 | mV | 4-V and 5-V range | 3 | ||
| Unipolar zero error drift | -2 | 2 | ppm/°C | 3 | |||
| Power supply sensitivity | -8 | 8 | LSB | +4.75 V < VD < +5.25 V (VDIG = VANA = VD) | 3 | ||
| Spurious-free dynamic range (ADS8509IB) | SFDR | 95 | 99 | dB | fI = 20 kHz | 3 | |
| Total harmonic distortion (ADS8509IB) | THD | -98 | -93 | dB | fI = 20 kHz | 3 | |
| Signal-to-(noise+distortion) (ADS8509IB) | SINAD | 85 | 88 | dB | fI = 20 kHz | 3 | |
| Signal-to-noise ratio (ADS8509IB) | SNR | 86 | 88 | dB | fI = 20 kHz | 3 | |
| Internal reference voltage | 2.48 | 2.5 | 2.52 | V | No load | 4 | |
| External reference voltage range | 2.3 | 2.5 | 2.7 | V | For specified linearity | 4 | |
| Low-level input voltage | VIL | -0.3 | 0.8 | V | 4 | ||
| High-level input voltage | VIH | 2 | V | 4 | |||
| Low-level input current | IIL | -10 | 10 | mA | VIL = 0 V | 4 | |
| High-level input current | IIH | -10 | 10 | mA | VIH = 5 V | 4 | |
| External data clock frequency | 0.1 | 26 | MHz | EXT/INT High; can run continually but not recommended for optimum performance | 4 | ||
| Hi-Z state leakage current | -5 | 5 | mA | VOUT = 0 V to VDIG | 4 | ||
| Digital supply voltage VDIG | VDIG | 4.75 | 5 | 5.25 | V | 4 | |
| Analog supply voltage VANA | VANA | 4.75 | 5 | 5.25 | V | 4 | |
| Power dissipation, PWRD low | 70 | 100 | mW | PWRD Low; fS = 250 kHz | 4 | ||
| Specified performance temperature range | -40 | 85 | °C | 4 | |||
| Derated performance temperature range | -55 | 125 | °C | Derated performance | 4 | ||
| Thermal resistance junction-to-ambient, SO package | qJA | 46 | °C/W | SO package | 4 |
CAD (KiCad official)
- Symbol:
ADS8509IBDW - Footprint:
Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm - 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
- 3D model files:
ads8509ibdw-etched.step/ads8509ibdw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ads8509ibdw.step/ads8509ibdw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
862b91c3a8670e55, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ADS8509IBDW
**Texas Instruments** · Analog To Digital Converters (ADCs) · SOIC-20-300mil
ADS8509IBDW from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | R1IN | input | Analog input; see Table 2 of the datasheet for input range connections. |
| 2 | AGND1 | power_in | Analog ground used internally as the ground reference point, with minimal current flow. |
| 3 | R2IN | input | Analog input; see Table 2 of the datasheet for input range connections. |
| 4 | R3IN | input | Analog input; see Table 2 of the datasheet for input range connections. |
| 5 | CAP | passive | Reference buffer capacitor, specified as 2.2-mF tantalum to ground (value as printed in the datasheet). |
| 6 | REF | bidirectional | Reference input/output; outputs the internal 2.5-V reference or can be driven by an external reference, and is bypassed to ground with a 2.2-mF tantalum capacitor. |
| 7 | AGND2 | power_in | Analog ground. |
| 8 | SB/BTC | input | Selects straight binary output format when high and binary 2's complement output format when low. |
| 9 | EXT/INT | input | Selects the data transmission clock: when high, data is synchronized to the DATACLK input; when low, a convert command initiates transmission of the previous conversion's data with 16 clock pulses output on DATACLK. |
| 10 | DGND | power_in | Digital ground. |
| 11 | SYNC | output | Sync output that supplies a data synchronization pulse when EXT is high and at least one external clock pulse has occurred while not in read mode. |
| 12 | DATACLK | bidirectional | Input or output depending on EXT/INT level; output data is synchronized to this clock, and when EXT/INT is low it transmits 16 pulses after each conversion and stays low between conversions. |
| 13 | DATA | output | Serial data output synchronized to DATACLK, with format set by SB/BTC; in external clock mode it outputs the TAG level after 16 bits while CS is low and R/C is high. |
| 14 | TAG | input | Tag input for the external clock mode; when EXT is high, digital data from TAG is output on DATA with a delay that depends on the external clock mode. |
| 15 | R/C | input | Read/convert input; with CS low, a falling edge puts the sample-and-hold into hold and starts a conversion, and also initiates data transmission when EXT/INT is low. |
| 16 | CS | input | Chip select, internally ORed with R/C. |
| 17 | BUSY | output | Busy output that falls when a conversion starts and remains low until the conversion is complete and the data is latched into the output shift register. |
| 18 | PWRD | input | Power-down input; when high, conversions are inhibited and power consumption is significantly reduced, while previous results are maintained in the output shift register. |
| 19 | VANA | power_in | Analog supply input, nominally +5 V (4.75 V to 5.25 V per electrical characteristics); connect directly to pin 20 and decouple to ground with 0.1-mF ceramic and 10-mF tantalum capacitors. |
| 20 | VDIG | power_in | Digital supply input, nominally +5 V; connect directly to pin 19 and must be less than or equal to VANA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-20-300mil |
| Category | Data Converters |
| Pins | 20 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Analog input voltage R1IN | R1IN | -25 | | 25 | V | Voltages with respect to network ground terminal | 2 |
| Analog input voltage R2IN | R2IN | -25 | | 25 | V | Voltages with respect to network ground terminal | 2 |
| Analog input voltage R3IN | R3IN | -25 | | 25 | V | Voltages with respect to network ground terminal | 2 |
| Ground voltage differences DGND, AGND2 | | -0.3 | | 0.3 | V | | 2 |
| Analog supply VANA | VANA | | | 6 | V | | 2 |
| Digital supply VDIG | VDIG | | | 6 | V | | 2 |
| Digital inputs | | -0.3 | | | V | Printed as -0.3 V to +VDIG + 0.3 V; upper limit is an expression | 2 |
| Maximum junction temperature | | | | 165 | °C | | 2 |
| Storage temperature range | | -65 | | 150 | °C | | 2 |
| Internal power dissipation | | | | 700 | mW | | 2 |
| Integral linearity error (ADS8509IB) | INL | -2 | | 2 | LSB | | 3 |
| Differential linearity error (ADS8509IB) | DNL | -1 | | 1 | LSB | | 3 |
| Full-scale error, ±10-V range, internal reference | | -0.5 | | 0.5 | %FSR | Int. ref. with 0.1% external fixed resistors | 3 |
| Full-scale error, all other ranges, internal reference | | -0.5 | | 0.5 | %FSR | Int. ref.; all other ranges | 3 |
| Full-scale error drift, internal reference | | -7 | | 7 | ppm/°C | Int. ref. | 3 |
| Full-scale error, ±10-V range, external reference | | -0.5 | | 0.5 | %FSR | Ext. ref. with 0.1% external fixed resistors | 3 |
| Full-scale error, all other ranges, external reference | | -0.5 | | 0.5 | %FSR | Ext. ref.; all other ranges | 3 |
| Full-scale error drift, external reference | | -2 | | 2 | ppm/°C | Ext. ref. | 3 |
| Bipolar zero error (ADS8509IB) | | -5 | | 5 | mV | | 3 |
| Bipolar zero error drift | | -0.4 | | 0.4 | ppm/°C | | 3 |
| Unipolar zero error, 10-V range (ADS8509IB) | | -5 | | 5 | mV | 10-V range | 3 |
| Unipolar zero error, 4-V and 5-V range (ADS8509IB) | | -3 | | 3 | mV | 4-V and 5-V range | 3 |
| Unipolar zero error drift | | -2 | | 2 | ppm/°C | | 3 |
| Power supply sensitivity | | -8 | | 8 | LSB | +4.75 V < VD < +5.25 V (VDIG = VANA = VD) | 3 |
| Spurious-free dynamic range (ADS8509IB) | SFDR | 95 | 99 | | dB | fI = 20 kHz | 3 |
| Total harmonic distortion (ADS8509IB) | THD | | -98 | -93 | dB | fI = 20 kHz | 3 |
| Signal-to-(noise+distortion) (ADS8509IB) | SINAD | 85 | 88 | | dB | fI = 20 kHz | 3 |
| Signal-to-noise ratio (ADS8509IB) | SNR | 86 | 88 | | dB | fI = 20 kHz | 3 |
| Internal reference voltage | | 2.48 | 2.5 | 2.52 | V | No load | 4 |
| External reference voltage range | | 2.3 | 2.5 | 2.7 | V | For specified linearity | 4 |
| Low-level input voltage | VIL | -0.3 | | 0.8 | V | | 4 |
| High-level input voltage | VIH | 2 | | | V | | 4 |
| Low-level input current | IIL | -10 | | 10 | mA | VIL = 0 V | 4 |
| High-level input current | IIH | -10 | | 10 | mA | VIH = 5 V | 4 |
| External data clock frequency | | 0.1 | | 26 | MHz | EXT/INT High; can run continually but not recommended for optimum performance | 4 |
| Hi-Z state leakage current | | -5 | | 5 | mA | VOUT = 0 V to VDIG | 4 |
| Digital supply voltage VDIG | VDIG | 4.75 | 5 | 5.25 | V | | 4 |
| Analog supply voltage VANA | VANA | 4.75 | 5 | 5.25 | V | | 4 |
| Power dissipation, PWRD low | | | 70 | 100 | mW | PWRD Low; fS = 250 kHz | 4 |
| Specified performance temperature range | | -40 | | 85 | °C | | 4 |
| Derated performance temperature range | | -55 | | 125 | °C | Derated performance | 4 |
| Thermal resistance junction-to-ambient, SO package | qJA | | 46 | | °C/W | SO package | 4 |
## CAD (KiCad official)
- Symbol: `ADS8509IBDW`
- Footprint: `Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm`
- 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
- 3D model files: `ads8509ibdw-etched.step` / `ads8509ibdw-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ads8509ibdw.step` / `ads8509ibdw.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ads8509ibdw.pdf) (35 pp, sha256 `862b91c3a8670e55`, retrieved 2026-11-12, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ads8509ibdw-datasheet.pdf)