component
ADS8324E
Public Made by Adomby adom
Texas Instruments Analog To Digital Converters (ADCs), VSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+44@@ -0,0 +1,44 @@+# ADS8324E++**Texas Instruments** · Analog To Digital Converters (ADCs) · VSSOP-8++ADS8324E from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VREF | power_in | Reference input that sets the analog input range; it can be any voltage from 500mV to VCC/2. |+| 2 | +In | input | Non-inverting analog input, which should always remain within GND - 100mV to VCC + 100mV for linearity to meet specification. |+| 3 | -In | input | Inverting analog input, which should always remain within GND - 100mV to 2V for linearity to meet specification. |+| 4 | GND | power_in | Ground reference; the datasheet recommends placing it on a clean ground point, away from microcontroller ground connections. |+| 5 | CS/SHDN | input | Chip select when LOW and shutdown mode when HIGH; CS must be taken HIGH after a conversion to place DOUT in tri-state. |+| 6 | DOUT | output | Serial data output, MSB first, valid on the DCLOCK rising edge; it is enabled after the fifth falling DCLOCK edge following CS falling and swings from 0V to VCC. |+| 7 | DCLOCK | input | Data clock that synchronizes serial data transfer and sets conversion speed; the external clock may range from 24kHz to 1.2MHz with minimum high and low times of 200ns. |+| 8 | +VCC | power_in | Power supply; specified performance at 1.8V with an operating range of 1.8V to 3.6V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VSSOP-8 |+| Category | ADC/DAC/Data Conversion |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `ADS8324E`+- Footprint: `Package_SO:VSSOP-8_2.3x2mm_P0.5mm`+- 3D model: VSSOP-8 (KiCad packages3D, STEP)+- 3D model files: `ads8324e-etched.step` / `ads8324e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ads8324e.step` / `ads8324e.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ads8324) (18 pp, sha256 `57ab08a1196510b2`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ads8324e-datasheet.pdf)
page.jsonadded+197@@ -0,0 +1,197 @@+{+ "slug": "ads8324e",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Analog To Digital Converters (ADCs), VSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "adc-dac-data conversion",+ "ads8324e",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ads8324e.kicad_sym",+ "ads8324e.kicad_mod",+ "ads8324e.glb",+ "ads8324e.step",+ "ads8324e.lbr",+ "docs/hero.png",+ "docs/ads8324e-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ads8324e-hero.glb",+ "ads8324e-hero.overlay.json"+ ],+ "component": {+ "mpn": "ADS8324E",+ "manufacturer": "Texas Instruments",+ "package": "VSSOP-8",+ "pin_count": 8,+ "category": "ADC/DAC/Data Conversion",+ "subcategory": "Analog To Digital Converters (ADCs)",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ads8324",+ "parts": {+ "symbol": "ads8324e.kicad_sym",+ "footprint": "ads8324e.kicad_mod",+ "model_3d": "ads8324e-hero.glb",+ "model_3d_plain": "ads8324e.glb",+ "model_3d_step": "ads8324e-etched.step",+ "model_3d_step_plain": "ads8324e.step",+ "lbr": "ads8324e.lbr"+ },+ "distributor_links": {+ "lcsc": "C2670491"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T15:59:16Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VREF",+ "type": "power_in",+ "description": "Reference input that sets the analog input range; it can be any voltage from 500mV to VCC/2."+ },+ {+ "number": "2",+ "name": "+In",+ "type": "input",+ "description": "Non-inverting analog input, which should always remain within GND - 100mV to VCC + 100mV for linearity to meet specification."+ },+ {+ "number": "3",+ "name": "–In",+ "type": "input",+ "description": "Inverting analog input, which should always remain within GND - 100mV to 2V for linearity to meet specification."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference; the datasheet recommends placing it on a clean ground point, away from microcontroller ground connections."+ },+ {+ "number": "5",+ "name": "CS/SHDN",+ "type": "input",+ "description": "Chip select when LOW and shutdown mode when HIGH; CS must be taken HIGH after a conversion to place DOUT in tri-state."+ },+ {+ "number": "6",+ "name": "DOUT",+ "type": "output",+ "description": "Serial data output, MSB first, valid on the DCLOCK rising edge; it is enabled after the fifth falling DCLOCK edge following CS falling and swings from 0V to VCC."+ },+ {+ "number": "7",+ "name": "DCLOCK",+ "type": "input",+ "description": "Data clock that synchronizes serial data transfer and sets conversion speed; the external clock may range from 24kHz to 1.2MHz with minimum high and low times of 200ns."+ },+ {+ "number": "8",+ "name": "+VCC",+ "type": "power_in",+ "description": "Power supply; specified performance at 1.8V with an operating range of 1.8V to 3.6V."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Package naming differs within the datasheet: the text says MSOP-8, while the package drawing is DGK0; The datasheet does not state a pin 1 orientation mark in the text; pin numbers 1-8 are taken from th; Pin types for VREF, +In, -In, CS/SHDN and DCLOCK are inferred from their functions as input pins, si"+ ],+ "pages_sent": 18,+ "cost_usd": 0.0926,+ "at": "2026-10-08T15:58:57"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ads8324",+ "pages": 18,+ "sha256": "57ab08a1196510b2",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ads8324e.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.1,+ 2,+ 0.85+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "353552981eef35cb93635057d4aeb89aef22648c77af6fd095e328bfe6b834bd",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ads8324e-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.1,+ 2,+ 0.85+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "34f43c0739243763ed77a4f5040e354452cbbd185585a94deb608ef7dfa3d3b3",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}