component
ADS8324E
Public Made by Adomby adom
Texas Instruments Analog To Digital Converters (ADCs), VSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownADS8324E
Texas Instruments · Analog To Digital Converters (ADCs) · VSSOP-8
ADS8324E from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VREF | power_in | Reference input that sets the analog input range; it can be any voltage from 500mV to VCC/2. |
| 2 | +In | input | Non-inverting analog input, which should always remain within GND - 100mV to VCC + 100mV for linearity to meet specification. |
| 3 | -In | input | Inverting analog input, which should always remain within GND - 100mV to 2V for linearity to meet specification. |
| 4 | GND | power_in | Ground reference; the datasheet recommends placing it on a clean ground point, away from microcontroller ground connections. |
| 5 | CS/SHDN | input | Chip select when LOW and shutdown mode when HIGH; CS must be taken HIGH after a conversion to place DOUT in tri-state. |
| 6 | DOUT | output | Serial data output, MSB first, valid on the DCLOCK rising edge; it is enabled after the fifth falling DCLOCK edge following CS falling and swings from 0V to VCC. |
| 7 | DCLOCK | input | Data clock that synchronizes serial data transfer and sets conversion speed; the external clock may range from 24kHz to 1.2MHz with minimum high and low times of 200ns. |
| 8 | +VCC | power_in | Power supply; specified performance at 1.8V with an operating range of 1.8V to 3.6V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | ADC/DAC/Data Conversion |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
ADS8324E - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ads8324e-etched.step/ads8324e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ads8324e.step/ads8324e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (18 pp, sha256
57ab08a1196510b2, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).