main
History Download
Ray Publish 0.1.0 3b31578

ADS8320EB

The maker sells this part only as ADS8320EB/250, ADS8320EB/2K5 (TI package option addendum / ordering table: the slash suffix is the reel quantity (tape and reel); the bare code is not orderable (p.28)). The DigiKey and Mouser numbers on this page are for ADS8320EB/250.

Texas Instruments · Analog To Digital Converters (ADC) · VSSOP-8

ADS8320EB from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VREF power_in Reference input for analog voltage comparison; acceptable range 0.5 V to VCC.
2 +In input Noninverting analog input; acceptable voltage range -0.1 V to VCC + 0.1 V relative to GND.
3 -In input Inverting analog input; connect to ground or remote ground sense point; acceptable voltage range -0.1 V to 0.5 V relative to GND.
4 GND power_in Ground reference for all analog and digital circuits.
5 CS/SHDN input Chip select when LOW enables conversion and serial data output; shutdown mode when held HIGH.
6 DOUT output Serial output data comprised of 16 bits; data valid on falling edge of DCLOCK after second clock pulse following CS falling edge.
7 DCLOCK input Data clock input that synchronizes serial data transfer and determines conversion speed.
8 +VCC power_in Power supply; acceptable range 2.7 V to 5.25 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Data Acquisition
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC absolute maximum VCC 6 V 4
Analog input voltage (absolute maximum) -0.3 V Max printed as VCC + 0.3 V 4
Logic input voltage (absolute maximum) -0.3 6 V 4
External reference voltage (absolute maximum) 5.5 V 4
Input current to any pin except supply -10 10 mA 4
Case temperature (absolute maximum) 100 °C 4
Junction temperature (absolute maximum) 150 °C 4
Storage temperature Tstg 125 °C 4
Supply voltage VCC, low voltage levels VCC 2.7 3.3 V VCC to GND, low voltage levels 4
Supply voltage VCC, 5-V logic levels VCC 4.75 5 5.25 V VCC to GND, 5-V logic levels 4
Reference input voltage VREF 0.5 V Max printed as VCC 4
Analog input voltage -IN to GND -0.1 0 0.5 V -IN to GND 4
Analog input voltage +IN to GND -0.1 V +IN to GND; max printed as VCC + 0.1 V 4
Analog input voltage differential +IN to -(-IN) 0 V +IN to -(-IN); max printed as VREF 4
Operating temperature TA TA -40 85 °C Operating free-air temperature 4
Absolute input +In +In -0.1 V VCC = 5 V; max printed as VCC + 0.1 V 5
Absolute input -In -In -0.1 1 V VCC = 5 V 5
Full-scale input span +In, (-In) 0 V VCC = 5 V; max printed as VREF 5
Integral linearity error, ADS8320EB INL -0.012 0.006 0.012 % FSR VCC = 5 V; ADS8320EB 5
Offset error, ADS8320EB -1 0.5 1 mV VCC = 5 V; ADS8320EB 5
Offset temperature drift -3 3 µV/°C VCC = 5 V 5
Gain error, ADS8320EB -0.024 0.024 % FSR VCC = 5 V; ADS8320EB 5
Gain error temperature drift -0.3 0.3 ppm/°C VCC = 5 V 5
Power-supply rejection ratio PSRR 3 LSB VCC = 5 V; 4.7 V < VCC < 5.25 V 5
Clock frequency fCLK 0.024 2.4 MHz VCC = 5 V 5
Total harmonic distortion, ADS8320EB THD -86 dB VCC = 5 V; VIN = 5 VP-P at 10 kHz 5
SINAD, ADS8320EB SINAD 84 dB VCC = 5 V; VIN = 5 VP-P at 10 kHz 5
Spurious-free dynamic range, ADS8320EB SFDR 86 dB VCC = 5 V; VIN = 5 VP-P at 10 kHz 5
Signal-to-noise ratio, ADS8320EB SNR 92 dB VCC = 5 V; ADS8320EB 5
Reference input voltage VREF 0.5 V VCC = 5 V; max printed as VCC 5
Reference current drain 40 80 µA VCC = 5 V; test condition not printed on row 5
Reference current drain, CS high 0.1 3 µA VCC = 5 V; CS = VCC 6
Digital input high voltage VIH 3 V VCC = 5 V; IIH = 5 µA; max printed as VCC + 0.3 V 6
Digital input low voltage VIL -0.3 0.8 V VCC = 5 V; IIL = 5 µA 6
Digital output high voltage VOH 4 V VCC = 5 V; IOH = -250 µA 6
Digital output low voltage VOL 0.4 V VCC = 5 V; IOL = 250 µA 6
VCC specified performance VCC 4.75 5.25 V VCC = 5 V 6
Supply voltage VCC operating range VCC 2 5.25 V VCC = 5 V; note 2 6
Quiescent current IQ 900 1700 µA VCC = 5 V 6
Power dissipation 4.5 8.5 mW VCC = 5 V 6
Power-down current 0.3 3 µA VCC = 5 V; CS = VCC 6
Absolute input +In +In -0.1 V VCC = 2.7 V; max printed as VCC + 0.1 V 7
Absolute input -In -In -0.1 0.5 V VCC = 2.7 V 7
Total harmonic distortion, ADS8320EB THD -88 dB VCC = 2.7 V; VIN = 2.7 VP-P at 1 kHz 7
SINAD, ADS8320EB SINAD 86 dB VCC = 2.7 V; VIN = 2.7 VP-P at 1 kHz 7
Spurious-free dynamic range, ADS8320EB SFDR 88 dB VCC = 2.7 V; VIN = 2.7 VP-P at 1 kHz 7
Signal-to-noise ratio, ADS8320EB SNR 90 dB VCC = 2.7 V; ADS8320EB 7
Reference current drain 20 50 µA VCC = 2.7 V; test condition not printed on row 7
Reference current drain, CS high 0.1 3 µA VCC = 2.7 V; CS = VCC 7
Digital input high voltage VIH 2 V VCC = 2.7 V; IIH = 5 µA; max printed as VCC + 0.3 V 7
Digital output high voltage VOH 2.1 V VCC = 2.7 V; IOH = -250 µA 7
VCC specified performance VCC 2.7 3.3 V VCC = 2.7 V 7
Supply voltage VCC, reduced clock rate range VCC 2 2.7 V Maximum clock rate less than 2.4 MHz in this range (note 3) 7
Quiescent current IQ 650 1300 µA VCC = 2.7 V 7
Power dissipation 1.8 3.8 mW VCC = 2.7 V 7
Junction-to-ambient thermal resistance RθJA 163.1 °C/W DGK (VSSOP) 8 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 56.6 °C/W DGK (VSSOP) 8 pins 4
Junction-to-board thermal resistance RθJB 83.4 °C/W DGK (VSSOP) 8 pins 4
Junction-to-top characterization parameter ψJT 6.7 °C/W DGK (VSSOP) 8 pins 4
Junction-to-board characterization parameter ψJB 82 °C/W DGK (VSSOP) 8 pins 4

CAD (KiCad official)

  • Symbol: ADS8320EB
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ads8320eb-etched.step / ads8320eb-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ads8320eb.step / ads8320eb.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (33 pp, sha256 588987b04752dc81, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF