Generated by kicad-footprint-generator · KiCad file format 20260206
ADS8320EB
The maker sells this part only as ADS8320EB/250, ADS8320EB/2K5 (TI package option addendum / ordering table: the slash suffix is the reel quantity (tape and reel); the bare code is not orderable (p.28)). The DigiKey and Mouser numbers on this page are for ADS8320EB/250.
Texas Instruments · Analog To Digital Converters (ADC) · VSSOP-8
ADS8320EB from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VREF | power_in | Reference input for analog voltage comparison; acceptable range 0.5 V to VCC. |
| 2 | +In | input | Noninverting analog input; acceptable voltage range -0.1 V to VCC + 0.1 V relative to GND. |
| 3 | -In | input | Inverting analog input; connect to ground or remote ground sense point; acceptable voltage range -0.1 V to 0.5 V relative to GND. |
| 4 | GND | power_in | Ground reference for all analog and digital circuits. |
| 5 | CS/SHDN | input | Chip select when LOW enables conversion and serial data output; shutdown mode when held HIGH. |
| 6 | DOUT | output | Serial output data comprised of 16 bits; data valid on falling edge of DCLOCK after second clock pulse following CS falling edge. |
| 7 | DCLOCK | input | Data clock input that synchronizes serial data transfer and determines conversion speed. |
| 8 | +VCC | power_in | Power supply; acceptable range 2.7 V to 5.25 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Data Acquisition |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VCC absolute maximum | VCC | 6 | V | 4 | |||
| Analog input voltage (absolute maximum) | -0.3 | V | Max printed as VCC + 0.3 V | 4 | |||
| Logic input voltage (absolute maximum) | -0.3 | 6 | V | 4 | |||
| External reference voltage (absolute maximum) | 5.5 | V | 4 | ||||
| Input current to any pin except supply | -10 | 10 | mA | 4 | |||
| Case temperature (absolute maximum) | 100 | °C | 4 | ||||
| Junction temperature (absolute maximum) | 150 | °C | 4 | ||||
| Storage temperature | Tstg | 125 | °C | 4 | |||
| Supply voltage VCC, low voltage levels | VCC | 2.7 | 3.3 | V | VCC to GND, low voltage levels | 4 | |
| Supply voltage VCC, 5-V logic levels | VCC | 4.75 | 5 | 5.25 | V | VCC to GND, 5-V logic levels | 4 |
| Reference input voltage | VREF | 0.5 | V | Max printed as VCC | 4 | ||
| Analog input voltage -IN to GND | -0.1 | 0 | 0.5 | V | -IN to GND | 4 | |
| Analog input voltage +IN to GND | -0.1 | V | +IN to GND; max printed as VCC + 0.1 V | 4 | |||
| Analog input voltage differential +IN to -(-IN) | 0 | V | +IN to -(-IN); max printed as VREF | 4 | |||
| Operating temperature TA | TA | -40 | 85 | °C | Operating free-air temperature | 4 | |
| Absolute input +In | +In | -0.1 | V | VCC = 5 V; max printed as VCC + 0.1 V | 5 | ||
| Absolute input -In | -In | -0.1 | 1 | V | VCC = 5 V | 5 | |
| Full-scale input span | +In, (-In) | 0 | V | VCC = 5 V; max printed as VREF | 5 | ||
| Integral linearity error, ADS8320EB | INL | -0.012 | 0.006 | 0.012 | % FSR | VCC = 5 V; ADS8320EB | 5 |
| Offset error, ADS8320EB | -1 | 0.5 | 1 | mV | VCC = 5 V; ADS8320EB | 5 | |
| Offset temperature drift | -3 | 3 | µV/°C | VCC = 5 V | 5 | ||
| Gain error, ADS8320EB | -0.024 | 0.024 | % FSR | VCC = 5 V; ADS8320EB | 5 | ||
| Gain error temperature drift | -0.3 | 0.3 | ppm/°C | VCC = 5 V | 5 | ||
| Power-supply rejection ratio | PSRR | 3 | LSB | VCC = 5 V; 4.7 V < VCC < 5.25 V | 5 | ||
| Clock frequency | fCLK | 0.024 | 2.4 | MHz | VCC = 5 V | 5 | |
| Total harmonic distortion, ADS8320EB | THD | -86 | dB | VCC = 5 V; VIN = 5 VP-P at 10 kHz | 5 | ||
| SINAD, ADS8320EB | SINAD | 84 | dB | VCC = 5 V; VIN = 5 VP-P at 10 kHz | 5 | ||
| Spurious-free dynamic range, ADS8320EB | SFDR | 86 | dB | VCC = 5 V; VIN = 5 VP-P at 10 kHz | 5 | ||
| Signal-to-noise ratio, ADS8320EB | SNR | 92 | dB | VCC = 5 V; ADS8320EB | 5 | ||
| Reference input voltage | VREF | 0.5 | V | VCC = 5 V; max printed as VCC | 5 | ||
| Reference current drain | 40 | 80 | µA | VCC = 5 V; test condition not printed on row | 5 | ||
| Reference current drain, CS high | 0.1 | 3 | µA | VCC = 5 V; CS = VCC | 6 | ||
| Digital input high voltage | VIH | 3 | V | VCC = 5 V; IIH = 5 µA; max printed as VCC + 0.3 V | 6 | ||
| Digital input low voltage | VIL | -0.3 | 0.8 | V | VCC = 5 V; IIL = 5 µA | 6 | |
| Digital output high voltage | VOH | 4 | V | VCC = 5 V; IOH = -250 µA | 6 | ||
| Digital output low voltage | VOL | 0.4 | V | VCC = 5 V; IOL = 250 µA | 6 | ||
| VCC specified performance | VCC | 4.75 | 5.25 | V | VCC = 5 V | 6 | |
| Supply voltage VCC operating range | VCC | 2 | 5.25 | V | VCC = 5 V; note 2 | 6 | |
| Quiescent current | IQ | 900 | 1700 | µA | VCC = 5 V | 6 | |
| Power dissipation | 4.5 | 8.5 | mW | VCC = 5 V | 6 | ||
| Power-down current | 0.3 | 3 | µA | VCC = 5 V; CS = VCC | 6 | ||
| Absolute input +In | +In | -0.1 | V | VCC = 2.7 V; max printed as VCC + 0.1 V | 7 | ||
| Absolute input -In | -In | -0.1 | 0.5 | V | VCC = 2.7 V | 7 | |
| Total harmonic distortion, ADS8320EB | THD | -88 | dB | VCC = 2.7 V; VIN = 2.7 VP-P at 1 kHz | 7 | ||
| SINAD, ADS8320EB | SINAD | 86 | dB | VCC = 2.7 V; VIN = 2.7 VP-P at 1 kHz | 7 | ||
| Spurious-free dynamic range, ADS8320EB | SFDR | 88 | dB | VCC = 2.7 V; VIN = 2.7 VP-P at 1 kHz | 7 | ||
| Signal-to-noise ratio, ADS8320EB | SNR | 90 | dB | VCC = 2.7 V; ADS8320EB | 7 | ||
| Reference current drain | 20 | 50 | µA | VCC = 2.7 V; test condition not printed on row | 7 | ||
| Reference current drain, CS high | 0.1 | 3 | µA | VCC = 2.7 V; CS = VCC | 7 | ||
| Digital input high voltage | VIH | 2 | V | VCC = 2.7 V; IIH = 5 µA; max printed as VCC + 0.3 V | 7 | ||
| Digital output high voltage | VOH | 2.1 | V | VCC = 2.7 V; IOH = -250 µA | 7 | ||
| VCC specified performance | VCC | 2.7 | 3.3 | V | VCC = 2.7 V | 7 | |
| Supply voltage VCC, reduced clock rate range | VCC | 2 | 2.7 | V | Maximum clock rate less than 2.4 MHz in this range (note 3) | 7 | |
| Quiescent current | IQ | 650 | 1300 | µA | VCC = 2.7 V | 7 | |
| Power dissipation | 1.8 | 3.8 | mW | VCC = 2.7 V | 7 | ||
| Junction-to-ambient thermal resistance | RθJA | 163.1 | °C/W | DGK (VSSOP) 8 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 56.6 | °C/W | DGK (VSSOP) 8 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 83.4 | °C/W | DGK (VSSOP) 8 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 6.7 | °C/W | DGK (VSSOP) 8 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 82 | °C/W | DGK (VSSOP) 8 pins | 4 |
CAD (KiCad official)
- Symbol:
ADS8320EB - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ads8320eb-etched.step/ads8320eb-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ads8320eb.step/ads8320eb.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
588987b04752dc81, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).