component
ADS7960SRHBR
Public Made by Adomby adom
Texas Instruments Analog To Digital Converters (ADC), VQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownADS7960SRHBR
Texas Instruments · Analog To Digital Converters (ADC) · VQFN-32-EP(5x5)
ADS7960SRHBR from Texas Instruments, in a VQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AGND | power_in | Analog ground for the device; the datasheet lists AGND on pins 1, 22 for the 32-pin VQFN (12-channel) pinout. |
| 2 | MXO | output | Multiplexer output, an analog output that carries the selected channel to the ADC input path. |
| 3 | AINP | input | ADC input signal; AINP or CHn to AGND must stay within -0.3 V to VA + 0.3 V (absolute maximum). |
| 4 | AINM | input | ADC input ground for the differential-style ADC input pair with AINP. |
| 5 | NC | unconnected | Pin is internally not connected; do not float it and connect it to ground. |
| 6 | NC | unconnected | Pin is internally not connected; do not float it and connect it to ground. |
| 7 | Ch11 | input | Analog input channel for the multiplexer; must stay within -0.3 V to VA + 0.3 V to AGND (absolute maximum). |
| 8 | Ch10 | input | Analog input channel for the multiplexer; must stay within -0.3 V to VA + 0.3 V to AGND (absolute maximum). |
| 9 | Ch9 | input | Analog input channel for the multiplexer; must stay within -0.3 V to VA + 0.3 V to AGND (absolute maximum). |
| 10 | Ch8 | input | Analog input channel for the multiplexer; must stay within -0.3 V to VA + 0.3 V to AGND (absolute maximum). |
| 11 | Ch7 | input | Analog input channel for the multiplexer; must stay within -0.3 V to VA + 0.3 V to AGND (absolute maximum). |
| 12 | Ch6 | input | Analog input channel for the multiplexer; must stay within -0.3 V to VA + 0.3 V to AGND (absolute maximum). |
| 13 | Ch5 | input | Analog input channel for the multiplexer; must stay within -0.3 V to VA + 0.3 V to AGND (absolute maximum). |
| 14 | Ch4 | input | Analog input channel for the multiplexer; must stay within -0.3 V to VA + 0.3 V to AGND (absolute maximum). |
| 15 | Ch3 | input | Analog input channel for the multiplexer; must stay within -0.3 V to VA + 0.3 V to AGND (absolute maximum). |
| 16 | Ch2 | input | Analog input channel for the multiplexer; must stay within -0.3 V to VA + 0.3 V to AGND (absolute maximum). |
| 17 | Ch1 | input | Analog input channel for the multiplexer; must stay within -0.3 V to VA + 0.3 V to AGND (absolute maximum). |
| 18 | Ch0 | input | Analog input channel for the multiplexer; must stay within -0.3 V to VA + 0.3 V to AGND (absolute maximum). |
| 19 | NC | unconnected | Pin is internally not connected; do not float it and connect it to ground. |
| 20 | NC | unconnected | Pin is internally not connected; do not float it and connect it to ground. |
| 21 | +VA | power_in | Analog power supply, recommended range 2.7 V to 5.25 V (3.3 V nominal). |
| 22 | AGND | power_in | Analog ground for the device. |
| 23 | CS | input | Chip-select digital input, active low. |
| 24 | SCLK | input | Serial clock digital input; SCLK frequency is recommended up to 20 MHz. |
| 25 | SDI | input | Serial data digital input; digital input voltage to BDGND must stay within -0.3 V to 7 V (absolute maximum). |
| 26 | SDO | output | Serial data digital output; digital output to BDGND must stay within -0.3 V to VA + 0.3 V (absolute maximum). |
| 27 | BDGND | power_in | Digital ground for the digital I/O supply. |
| 28 | +VBD | power_in | Digital I/O supply, recommended range 1.7 V to +VA. |
| 29 | GPIO0 | bidirectional | General-purpose digital I/O that can be configured as the active-high Alarm output; digital input voltage to BDGND must stay within -0.3 V to 7 V (absolute maximum). |
| 30 | REFM | input | Reference ground for the external reference input (REFP-REFM); a 10-µF ceramic decoupling capacitor is required between REFP and REFM. |
| 31 | REFP | input | Reference input; recommended 2 V to 3 V with a 2.5 V ±10 mV external reference such as the REF5025. |
| 32 | +VA | power_in | Analog power supply, recommended range 2.7 V to 5.25 V (3.3 V nominal). |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32-EP(5x5) |
| Category | Data Acquisition |
| Pins | 33 |
CAD (KiCad official)
- Symbol:
ADS7960SRHBR - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: VQFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
ads7960srhbr-etched.step/ads7960srhbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ads7960srhbr.step/ads7960srhbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (87 pp, sha256
8ef9ce324ee60500, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).