ADS7043IDCUT

{
  "slug": "ads7043idcut",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Analog To Digital Converters (ADCs), VSSOP-8-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "adc-dac-data conversion",
    "ads7043idcut",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ads7043idcut.kicad_sym",
    "ads7043idcut.kicad_mod",
    "ads7043idcut.glb",
    "ads7043idcut.step",
    "ads7043idcut.lbr",
    "docs/hero.png",
    "docs/ads7043idcut-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ads7043idcut-hero.glb",
    "ads7043idcut-hero.overlay.json"
  ],
  "component": {
    "mpn": "ADS7043IDCUT",
    "manufacturer": "Texas Instruments",
    "package": "VSSOP-8-0.5mm",
    "pin_count": 8,
    "category": "ADC/DAC/Data Conversion",
    "subcategory": "Analog To Digital Converters (ADCs)",
    "datasheet": "https://www.ti.com/cn/lit/gpn/ads7043",
    "parts": {
      "symbol": "ads7043idcut.kicad_sym",
      "footprint": "ads7043idcut.kicad_mod",
      "model_3d": "ads7043idcut-hero.glb",
      "model_3d_plain": "ads7043idcut.glb",
      "model_3d_step": "ads7043idcut-etched.step",
      "model_3d_step_plain": "ads7043idcut.step",
      "lbr": "ads7043idcut.lbr"
    },
    "distributor_links": {
      "lcsc": "C1879630",
      "digikey": "296-ADS7043IDCUTTR-ND",
      "mouser": "595-ADS7043IDCUT"
    },
    "distributor_check": {
      "checked_at": "2026-10-07T22:06:02Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-ADS7043IDCUTTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-ADS7043IDCUT",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "DVDD",
        "type": "power_in",
        "description": "Digital I/O supply voltage, specified at 1.65 V to 3.6 V and independent of AVDD."
      },
      {
        "number": "2",
        "name": "SCLK",
        "type": "input",
        "description": "Serial clock input used for both conversion and data transfer; a 16 MHz SCLK supports 1 MSPS throughput."
      },
      {
        "number": "3",
        "name": "SDO",
        "type": "output",
        "description": "Serial data output that carries the conversion result, with the bus returned to 3-state when CS goes high."
      },
      {
        "number": "4",
        "name": "CS",
        "type": "input",
        "description": "Active-low chip select; the CS falling edge samples the analog input and starts conversion, and the rising edge ends the frame."
      },
      {
        "number": "5",
        "name": "AINM",
        "type": "input",
        "description": "Negative analog signal input for the pseudo-differential input, which the datasheet specifies to be within AVDD/2 ± 100 mV."
      },
      {
        "number": "6",
        "name": "AINP",
        "type": "input",
        "description": "Positive analog signal input, which the datasheet specifies to accept signals from 0 V to AVDD."
      },
      {
        "number": "7",
        "name": "AVDD",
        "type": "power_in",
        "description": "Analog power supply input specified at 1.65 V to 3.6 V, which also provides the ADC reference voltage."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground for the power supply; all analog and digital signals are referred to this pin."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet pin table gives the DCU (8-pin leaded VSSOP) pinout, and the ordering table lists ADS7; The datasheet has no KiCad analog pin class. AINP and AINM are typed as input, which follows the dat; Pin descriptions for AINM, AINP and AVDD use the input ranges from the Absolute Maximum Ratings, Rec"
        ],
        "pages_sent": 15,
        "cost_usd": 0.0609,
        "at": "2026-10-07T22:05:47"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/ads7043",
        "pages": 42,
        "sha256": "26f6377cba7f518b",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ads7043idcut.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.1,
          2.0,
          0.85
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "353552981eef35cb93635057d4aeb89aef22648c77af6fd095e328bfe6b834bd",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ads7043idcut-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.1,
          2.0,
          0.85
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "0429e776514405591bd10f4cd224c3ec388a051ca214529be392bba60efa9763",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}