component
ADS7043IDCUT
Public Made by Adomby adom
Texas Instruments Analog To Digital Converters (ADCs), VSSOP-8-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownADS7043IDCUT
Texas Instruments · Analog To Digital Converters (ADCs) · VSSOP-8-0.5mm
ADS7043IDCUT from Texas Instruments, in a VSSOP-8-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DVDD | power_in | Digital I/O supply voltage, specified at 1.65 V to 3.6 V and independent of AVDD. |
| 2 | SCLK | input | Serial clock input used for both conversion and data transfer; a 16 MHz SCLK supports 1 MSPS throughput. |
| 3 | SDO | output | Serial data output that carries the conversion result, with the bus returned to 3-state when CS goes high. |
| 4 | CS | input | Active-low chip select; the CS falling edge samples the analog input and starts conversion, and the rising edge ends the frame. |
| 5 | AINM | input | Negative analog signal input for the pseudo-differential input, which the datasheet specifies to be within AVDD/2 ± 100 mV. |
| 6 | AINP | input | Positive analog signal input, which the datasheet specifies to accept signals from 0 V to AVDD. |
| 7 | AVDD | power_in | Analog power supply input specified at 1.65 V to 3.6 V, which also provides the ADC reference voltage. |
| 8 | GND | power_in | Ground for the power supply; all analog and digital signals are referred to this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8-0.5mm |
| Category | ADC/DAC/Data Conversion |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
ADS7043IDCUT - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8-0.5mm (KiCad packages3D, STEP)
- 3D model files:
ads7043idcut-etched.step/ads7043idcut-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ads7043idcut.step/ads7043idcut.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
26f6377cba7f518b, retrieved 2026-10-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).