main
Ray Publish 0.1.2 6639187
{
  "schema_version": 1,
  "type": "component",
  "slug": "ads127l01ipbs",
  "title": "ADS127L01IPBS",
  "brief": "Texas Instruments Analog To Digital Converters (ADC), TQFP-32(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.2",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "data acquisition",
    "ads127l01ipbs",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "ADS127L01IPBS",
    "manufacturer": "Texas Instruments",
    "package": "TQFP-32(5x5)",
    "pin_count": 32,
    "category": "Data Acquisition",
    "subcategory": "Analog To Digital Converters (ADC)",
    "datasheet": "https://www.ti.com/cn/lit/gpn/ads127l01",
    "parts": {
      "symbol": "ads127l01ipbs.kicad_sym",
      "footprint": "ads127l01ipbs.kicad_mod",
      "model_3d": "ads127l01ipbs-hero.glb",
      "model_3d_plain": "ads127l01ipbs.glb",
      "model_3d_step": "ads127l01ipbs-etched.step",
      "model_3d_step_plain": "ads127l01ipbs.step",
      "lbr": "ads127l01ipbs.lbr"
    },
    "distributor_links": {
      "lcsc": "C1542823",
      "digikey": "296-48867-ND",
      "mouser": "595-ADS127L01IPBS"
    },
    "distributor_check": {
      "checked_at": "2026-10-01T18:39:17Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-48867-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-ADS127L01IPBS",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "LVDD",
        "type": "power_out",
        "description": "1.8-V analog supply from internal LDO regulator (INTLDO=0) or input (INTLDO=1); decouple with 1-µF capacitor to AGND."
      },
      {
        "number": "2",
        "name": "CAP1",
        "type": "output",
        "description": "Modulator common-mode voltage output; connect a 1-µF capacitor to AGND."
      },
      {
        "number": "3",
        "name": "AINN",
        "type": "input",
        "description": "Negative differential analog input for ADC measurement (range AGND-0.3V to AVDD+0.3V)."
      },
      {
        "number": "4",
        "name": "AINP",
        "type": "input",
        "description": "Positive differential analog input for ADC measurement (range AGND-0.3V to AVDD+0.3V)."
      },
      {
        "number": "5",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground reference."
      },
      {
        "number": "6",
        "name": "AVDD",
        "type": "power_in",
        "description": "Analog-supply voltage input (2.7V to 3.6V); connect a 1-µF capacitor to AGND."
      },
      {
        "number": "7",
        "name": "REXT",
        "type": "input",
        "description": "Analog power-scaling bias resistor pin; connect 60.4-kΩ resistor (HR/LP modes) or 120-kΩ (VLP mode) to AGND."
      },
      {
        "number": "8",
        "name": "INTLDO",
        "type": "input",
        "description": "LVDD voltage selection pin; pull high to AVDD (external 1.8-V supply) or low to AGND (internal LDO) through 10-kΩ resistor."
      },
      {
        "number": "9",
        "name": "REFP",
        "type": "input",
        "description": "Positive analog reference input; connect minimum 10-µF capacitor between REFP and REFN."
      },
      {
        "number": "10",
        "name": "REFN",
        "type": "input",
        "description": "Negative analog reference input."
      },
      {
        "number": "11",
        "name": "CAP2",
        "type": "output",
        "description": "Reference common-mode voltage output; connect a 1-µF capacitor to AGND."
      },
      {
        "number": "12",
        "name": "FILTER1",
        "type": "input",
        "description": "Digital filter select pin bit 1; pull high to DVDD or low to DGND through 100-kΩ resistor."
      },
      {
        "number": "13",
        "name": "FILTER0",
        "type": "input",
        "description": "Digital filter select pin bit 0; pull high/low through 100-kΩ resistor; 00=WB1, 01=WB2, 10=LL, 11=Reserved."
      },
      {
        "number": "14",
        "name": "FSMODE",
        "type": "input",
        "description": "Frame-sync mode select pin; pull high (master mode) or low (slave mode) through 100-kΩ resistor; applies to Frame-Sync interface only."
      },
      {
        "number": "15",
        "name": "OSR1",
        "type": "input",
        "description": "Oversampling ratio select pin bit 1 for decimation filters; pull high/low through 100-kΩ resistor."
      },
      {
        "number": "16",
        "name": "OSR0",
        "type": "input",
        "description": "Oversampling ratio select pin bit 0; pull high/low through 100-kΩ resistor; wideband filters 00=32x, 01=64x, 10=128x, 11=256x."
      },
      {
        "number": "17",
        "name": "START",
        "type": "input",
        "description": "Synchronization signal (active high) to start or restart ADC conversion."
      },
      {
        "number": "18",
        "name": "DAISYIN",
        "type": "input",
        "description": "Daisy-chain input for cascaded device configurations; tie directly to DGND if not daisy-chaining."
      },
      {
        "number": "19",
        "name": "DRDY/FSYNC",
        "type": "bidirectional",
        "description": "SPI interface: data ready output (active low); Frame-sync interface: frame-sync input signal for synchronization."
      },
      {
        "number": "20",
        "name": "DOUT",
        "type": "output",
        "description": "Serial data output from ADC (24-bit or 32-bit format); high-impedance when CS=1 in cascaded SPI configurations."
      },
      {
        "number": "21",
        "name": "DIN",
        "type": "input",
        "description": "Serial data input for SPI interface; tie directly to DGND when using frame-sync interface mode."
      },
      {
        "number": "22",
        "name": "SCLK",
        "type": "bidirectional",
        "description": "Serial clock input for SPI interface (0 to DVDD+0.3V); functions as input/output depending on interface configuration."
      },
      {
        "number": "23",
        "name": "CS",
        "type": "input",
        "description": "Chip select input (active high in SPI cascaded configurations); tie directly to DGND when using frame-sync interface; controls DOUT tri-state."
      },
      {
        "number": "24",
        "name": "CLK",
        "type": "input",
        "description": "Master clock input for internal timing and ADC modulator operation."
      },
      {
        "number": "25",
        "name": "CAP3",
        "type": "output",
        "description": "Internally-generated digital operating voltage output; connect a 1-µF capacitor to DGND."
      },
      {
        "number": "26",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital ground reference."
      },
      {
        "number": "27",
        "name": "DVDD",
        "type": "power_in",
        "description": "Digital-supply voltage input (1.7V to 3.6V); connect a 1-µF capacitor to DGND."
      },
      {
        "number": "28",
        "name": "RESET/PWDN",
        "type": "input",
        "description": "Reset or power-down pin (active low); asynchronous reset of all registers when pulled low."
      },
      {
        "number": "29",
        "name": "HR",
        "type": "input",
        "description": "ADC operating mode select; pull high to DVDD (high-resolution mode) or low to DGND (LP/VLP mode) through 100-kΩ resistor."
      },
      {
        "number": "30",
        "name": "FORMAT",
        "type": "input",
        "description": "Interface protocol select; pull high to DVDD (Frame-Sync mode) or low to DGND (SPI mode) through 100-kΩ resistor."
      },
      {
        "number": "31",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground reference."
      },
      {
        "number": "32",
        "name": "AVDD",
        "type": "power_in",
        "description": "Analog-supply voltage input (2.7V to 3.6V); connect a 1-µF capacitor to AGND."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 1 (LVDD) can function as power_out (internal LDO supply when INTLDO=0) or power_in (external 1.8; Pin 19 (DRDY/FSYNC) is bidirectional with mode-dependent function: operates as data ready output (ac; Pin 22 (SCLK) is bidirectional with primary serial clock input function for SPI interface but can op"
        ],
        "pages_sent": 12,
        "cost_usd": 0.4568,
        "at": "2026-10-01T18:39:08"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/ads127l01",
        "pages": 90,
        "sha256": "7af2117fe188e693",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 32,
        "described": 32,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ads127l01ipbs.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.96,
          6.96,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "9fd15d1506b3ec6dde8aff7a656c325e8c024551897dd90086c90338a6c2748c",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ads127l01ipbs-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.96,
          6.96,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "1ec66eabe6dfae80ff01696c020decc236014e8cc0b577eea7dbd4b82b3c18f1",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "TQFP-32(5x5)",
      "Category": "Data Acquisition",
      "Pins": "32"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ads127l01ipbs"
  ],
  "discovery_pitch": "ADS127L01IPBS (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ads127l01ipbs.kicad_sym",
    "ads127l01ipbs.kicad_mod",
    "ads127l01ipbs.glb",
    "ads127l01ipbs.step",
    "ads127l01ipbs.lbr",
    "docs/hero.png",
    "docs/ads127l01ipbs-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ads127l01ipbs-etched.step",
    "ads127l01ipbs-hero.glb",
    "ads127l01ipbs-hero.overlay.json"
  ],
  "visibility": "public",
  "description": "Texas Instruments Analog To Digital Converters (ADC), TQFP-32(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "org": "adom"
}