component
ADS1252U
Public Made by Adomby adom
Texas Instruments Analog To Digital Converters (ADC), SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownADS1252U
Texas Instruments · Analog To Digital Converters (ADC) · SOIC-8
ADS1252U from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +VIN | input | Positive input of the differential analog input pair, rated ±100 mA momentary / ±10 mA continuous, voltage range GND - 0.3 V to VDD + 0.3 V. |
| 2 | -VIN | input | Negative input of the differential analog input pair, rated ±100 mA momentary / ±10 mA continuous, voltage range GND - 0.3 V to VDD + 0.3 V. |
| 3 | +VDD | power_in | Single +5 V power supply input, operating range +4.75 V to +5.25 V, quiescent current 8-10 mA. |
| 4 | CLK | input | Device system clock input, CMOS-compatible Schmitt-trigger input, maximum 16 MHz. |
| 5 | DOUT/DRDY | output | Serial data output / data-ready indicator; logic LOW indicates new output word available from data output register, data shifts out on rising edge of SCLK. |
| 6 | SCLK | input | Serial clock input, CMOS-compatible Schmitt-trigger, independent of CLK, maximum 16 MHz; holding HIGH initiates modulator reset for converter synchronization or power-down mode. |
| 7 | GND | power_in | Ground / signal reference, must connect to analog ground plane per layout guidelines. |
| 8 | VREF | power_in | Reference voltage input, range 0.5 V to VDD, typical 4.096 V, average load current 220 µA at 16 MHz system clock. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Data Acquisition |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
ADS1252U - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ads1252u-etched.step/ads1252u-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ads1252u.step/ads1252u.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (25 pp, sha256
df5875bf4636e6e4, retrieved 2026-09-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).