main
Ray
Initial commit: component/ads1120ipw
4cf750d
ADS1120IPW
Texas Instruments · Analog To Digital Converters (ADC) · TSSOP-16
ADS1120IPW from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCLK | input | Serial clock input for SPI interface |
| 2 | CS | input | Chip select input, active low; can be connected permanently to DGND if bus is not shared |
| 3 | CLK | input | External clock source pin; connect to DGND when using internal oscillator |
| 4 | DGND | power_in | Digital ground |
| 5 | AVSS | power_in | Negative analog power supply (analog ground for single-supply operation) |
| 6 | AIN3/REFN1 | input | Analog input 3 or negative reference input 1; internal low-side power switch connected between this pin and AVSS |
| 7 | AIN2 | input | Analog input 2 |
| 8 | REFN0 | input | Negative reference input 0 |
| 9 | REFP0 | input | Positive reference input 0 |
| 10 | AIN1 | input | Analog input 1 |
| 11 | AIN0/REFP1 | input | Analog input 0 or positive reference input 1 |
| 12 | AVDD | power_in | Positive analog power supply; connect 100nF or larger capacitor to AVSS |
| 13 | DVDD | power_in | Positive digital power supply; connect 100nF or larger capacitor to DGND |
| 14 | DRDY | output | Data ready output, active low; leave unconnected or connect to DVDD with weak pull-up if not used |
| 15 | DOUT/DRDY | tri_state | Serial data output and combined data ready signal, active low; enters high impedance when CS is high |
| 16 | DIN | input | Serial data input for SPI interface |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Data Acquisition |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
ADS1120IPW - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
ads1120ipw-etched.step/ads1120ipw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ads1120ipw.step/ads1120ipw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (81 pp, sha256
c860263ddad0839a, retrieved 2026-09-26, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ADS1120IPW
**Texas Instruments** · Analog To Digital Converters (ADC) · TSSOP-16
ADS1120IPW from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCLK | input | Serial clock input for SPI interface |
| 2 | CS | input | Chip select input, active low; can be connected permanently to DGND if bus is not shared |
| 3 | CLK | input | External clock source pin; connect to DGND when using internal oscillator |
| 4 | DGND | power_in | Digital ground |
| 5 | AVSS | power_in | Negative analog power supply (analog ground for single-supply operation) |
| 6 | AIN3/REFN1 | input | Analog input 3 or negative reference input 1; internal low-side power switch connected between this pin and AVSS |
| 7 | AIN2 | input | Analog input 2 |
| 8 | REFN0 | input | Negative reference input 0 |
| 9 | REFP0 | input | Positive reference input 0 |
| 10 | AIN1 | input | Analog input 1 |
| 11 | AIN0/REFP1 | input | Analog input 0 or positive reference input 1 |
| 12 | AVDD | power_in | Positive analog power supply; connect 100nF or larger capacitor to AVSS |
| 13 | DVDD | power_in | Positive digital power supply; connect 100nF or larger capacitor to DGND |
| 14 | DRDY | output | Data ready output, active low; leave unconnected or connect to DVDD with weak pull-up if not used |
| 15 | DOUT/DRDY | tri_state | Serial data output and combined data ready signal, active low; enters high impedance when CS is high |
| 16 | DIN | input | Serial data input for SPI interface |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Data Acquisition |
| Pins | 16 |
## CAD (KiCad official)
- Symbol: `ADS1120IPW`
- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`
- 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files: `ads1120ipw-etched.step` / `ads1120ipw-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ads1120ipw.step` / `ads1120ipw.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ads1120) (81 pp, sha256 `c860263ddad0839a`, retrieved 2026-09-26, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ads1120ipw-datasheet.pdf)