← Commit history

Initial commit: component/ads1120ipw

Ray ·4cf750dd33 ·
2 files changed +258
README.mdadded+53
@@ -0,0 +1,53 @@+# ADS1120IPW++**Texas Instruments** · Analog To Digital Converters (ADC) · TSSOP-16++ADS1120IPW from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SCLK | input | Serial clock input for SPI interface |+| 2 | CS | input | Chip select input, active low; can be connected permanently to DGND if bus is not shared |+| 3 | CLK | input | External clock source pin; connect to DGND when using internal oscillator |+| 4 | DGND | power_in | Digital ground |+| 5 | AVSS | power_in | Negative analog power supply (analog ground for single-supply operation) |+| 6 | AIN3/REFN1 | input | Analog input 3 or negative reference input 1; internal low-side power switch connected between this pin and AVSS |+| 7 | AIN2 | input | Analog input 2 |+| 8 | REFN0 | input | Negative reference input 0 |+| 9 | REFP0 | input | Positive reference input 0 |+| 10 | AIN1 | input | Analog input 1 |+| 11 | AIN0/REFP1 | input | Analog input 0 or positive reference input 1 |+| 12 | AVDD | power_in | Positive analog power supply; connect 100nF or larger capacitor to AVSS |+| 13 | DVDD | power_in | Positive digital power supply; connect 100nF or larger capacitor to DGND |+| 14 | DRDY | output | Data ready output, active low; leave unconnected or connect to DVDD with weak pull-up if not used |+| 15 | DOUT/DRDY | tri_state | Serial data output and combined data ready signal, active low; enters high impedance when CS is high |+| 16 | DIN | input | Serial data input for SPI interface |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16 |+| Category | Data Acquisition |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `ADS1120IPW`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)+- 3D model files: `ads1120ipw-etched.step` / `ads1120ipw-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ads1120ipw.step` / `ads1120ipw.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ads1120) (81 pp, sha256 `c860263ddad0839a`, retrieved 2026-09-26, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ads1120ipw-datasheet.pdf)
page.jsonadded+205
@@ -0,0 +1,205 @@+{+  "slug": "ads1120ipw",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Analog To Digital Converters (ADC), TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "data acquisition",+    "ads1120ipw",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ads1120ipw.kicad_sym",+    "ads1120ipw.kicad_mod",+    "ads1120ipw.glb",+    "ads1120ipw.step",+    "ads1120ipw.lbr",+    "docs/hero.png",+    "docs/ads1120ipw-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "ADS1120IPW",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-16",+    "pin_count": 16,+    "category": "Data Acquisition",+    "subcategory": "Analog To Digital Converters (ADC)",+    "datasheet": "https://www.ti.com/cn/lit/gpn/ads1120",+    "parts": {+      "symbol": "ads1120ipw.kicad_sym",+      "footprint": "ads1120ipw.kicad_mod",+      "model_3d": "ads1120ipw-etched.glb",+      "model_3d_plain": "ads1120ipw.glb",+      "model_3d_step": "ads1120ipw-etched.step",+      "model_3d_step_plain": "ads1120ipw.step",+      "lbr": "ads1120ipw.lbr"+    },+    "distributor_links": {+      "lcsc": "C1542576",+      "digikey": "296-39550-5-ND",+      "mouser": "595-ADS1120IPW"+    },+    "distributor_check": {+      "checked_at": "2026-09-26T22:17:10Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-39550-5-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "595-ADS1120IPW",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "SCLK",+        "type": "input",+        "description": "Serial clock input for SPI interface"+      },+      {+        "number": "2",+        "name": "CS",+        "type": "input",+        "description": "Chip select input, active low; can be connected permanently to DGND if bus is not shared"+      },+      {+        "number": "3",+        "name": "CLK",+        "type": "input",+        "description": "External clock source pin; connect to DGND when using internal oscillator"+      },+      {+        "number": "4",+        "name": "DGND",+        "type": "power_in",+        "description": "Digital ground"+      },+      {+        "number": "5",+        "name": "AVSS",+        "type": "power_in",+        "description": "Negative analog power supply (analog ground for single-supply operation)"+      },+      {+        "number": "6",+        "name": "AIN3/REFN1",+        "type": "input",+        "description": "Analog input 3 or negative reference input 1; internal low-side power switch connected between this pin and AVSS"+      },+      {+        "number": "7",+        "name": "AIN2",+        "type": "input",+        "description": "Analog input 2"+      },+      {+        "number": "8",+        "name": "REFN0",+        "type": "input",+        "description": "Negative reference input 0"+      },+      {+        "number": "9",+        "name": "REFP0",+        "type": "input",+        "description": "Positive reference input 0"+      },+      {+        "number": "10",+        "name": "AIN1",+        "type": "input",+        "description": "Analog input 1"+      },+      {+        "number": "11",+        "name": "AIN0/REFP1",+        "type": "input",+        "description": "Analog input 0 or positive reference input 1"+      },+      {+        "number": "12",+        "name": "AVDD",+        "type": "power_in",+        "description": "Positive analog power supply; connect 100nF or larger capacitor to AVSS"+      },+      {+        "number": "13",+        "name": "DVDD",+        "type": "power_in",+        "description": "Positive digital power supply; connect 100nF or larger capacitor to DGND"+      },+      {+        "number": "14",+        "name": "DRDY",+        "type": "output",+        "description": "Data ready output, active low; leave unconnected or connect to DVDD with weak pull-up if not used"+      },+      {+        "number": "15",+        "name": "DOUT/DRDY",+        "type": "tri_state",+        "description": "Serial data output and combined data ready signal, active low; enters high impedance when CS is high"+      },+      {+        "number": "16",+        "name": "DIN",+        "type": "input",+        "description": "Serial data input for SPI interface"+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: DOUT/DRDY pin has dual functionality as both data output and data ready indicator; classified as tri; AIN3/REFN1 and AIN0/REFP1 pins have dual multiplexed functions (analog inputs or reference inputs) d"+        ],+        "pages_sent": 81,+        "cost_usd": 0.6752,+        "at": "2026-09-26T22:16:52"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/ads1120",+        "pages": 81,+        "sha256": "c860263ddad0839a",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file