ADS1113IDGST

{
  "slug": "ads1113idgst",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Global Sourcing Parts, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "global sourcing parts",
    "ads1113idgst",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ads1113idgst.kicad_sym",
    "ads1113idgst.kicad_mod",
    "ads1113idgst.glb",
    "ads1113idgst.step",
    "ads1113idgst.lbr",
    "docs/hero.png",
    "docs/ads1113idgst-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ads1113idgst-hero.glb",
    "ads1113idgst-hero.overlay.json"
  ],
  "component": {
    "mpn": "ADS1113IDGST",
    "manufacturer": "Texas Instruments",
    "package": "VSSOP-10-0.5mm",
    "pin_count": 10,
    "category": "Global Sourcing Parts",
    "subcategory": "Global Sourcing Parts",
    "datasheet": "https://www.ti.com/cn/lit/gpn/ads1114",
    "parts": {
      "symbol": "ads1113idgst.kicad_sym",
      "footprint": "ads1113idgst.kicad_mod",
      "model_3d": "ads1113idgst-hero.glb",
      "model_3d_plain": "ads1113idgst.glb",
      "model_3d_step": "ads1113idgst-etched.step",
      "model_3d_step_plain": "ads1113idgst.step",
      "lbr": "ads1113idgst.lbr"
    },
    "distributor_links": {
      "lcsc": "C2651336",
      "digikey": "296-24930-2-ND",
      "mouser": "595-ADS1113IDGST"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T03:00:08Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-24930-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-ADS1113IDGST",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "ADDR",
        "type": "input",
        "description": "I2C target address select: tie to GND, VDD, SDA, or SCL to select one of four target addresses (1001000b, 1001001b, 1001010b, 1001011b), and the pin state is sampled continuously."
      },
      {
        "number": "2",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect on the ADS1113 (ALERT/RDY is not provided on this device); leave floating or connect to GND."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Analog ground, the reference for the supply and for the analog input voltage limits."
      },
      {
        "number": "4",
        "name": "AIN0",
        "type": "input",
        "description": "Analog input 0; absolute input voltage must stay between GND and VDD, and the input cannot accept negative voltages with respect to GND."
      },
      {
        "number": "5",
        "name": "AIN1",
        "type": "input",
        "description": "Analog input 1; absolute input voltage must stay between GND and VDD, and it is connected to GND externally for single-ended measurements on the ADS1113."
      },
      {
        "number": "6",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect; leave floating or connect to GND."
      },
      {
        "number": "7",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect; leave floating or connect to GND."
      },
      {
        "number": "8",
        "name": "VDD",
        "type": "power_in",
        "description": "Power supply, 2 V to 5.5 V relative to GND; connect a 0.1 µF decoupling capacitor to GND."
      },
      {
        "number": "9",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C serial data input and output; open-drain, requires a pullup resistor to VDD, and the digital input limit is GND - 0.3 V to 5.5 V."
      },
      {
        "number": "10",
        "name": "SCL",
        "type": "input",
        "description": "I2C serial clock input; open-drain bus line requiring a pullup resistor to VDD, and the device never stretches the clock."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet's pin table covers the RUG, DYN, and DGS packages together. Pin numbers and positions ; For the ADS1113 specifically, Table 4-1 lists ALERT/RDY as absent (—) and assigns pin 2 as NC, with ; The schema has no field for specifications, so the headline electrical parameters (VDD 2 V to 5.5 V,"
        ],
        "pages_sent": 22,
        "cost_usd": 0.1334,
        "at": "2026-10-08T02:59:49"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/ads1114",
        "pages": 57,
        "sha256": "8b5524864b018672",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ads1113idgst.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ads1113idgst-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2de27d352b6ce0b54adaccaccebc91ae02b511b3b4627cf450dc7b5d3edf88f2",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}