component
ADS1113IDGST
Public Made by Adomby adom
Texas Instruments Global Sourcing Parts, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownADS1113IDGST
Texas Instruments · Global Sourcing Parts · VSSOP-10-0.5mm
ADS1113IDGST from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADDR | input | I2C target address select: tie to GND, VDD, SDA, or SCL to select one of four target addresses (1001000b, 1001001b, 1001010b, 1001011b), and the pin state is sampled continuously. |
| 2 | NC | unconnected | No connect on the ADS1113 (ALERT/RDY is not provided on this device); leave floating or connect to GND. |
| 3 | GND | power_in | Analog ground, the reference for the supply and for the analog input voltage limits. |
| 4 | AIN0 | input | Analog input 0; absolute input voltage must stay between GND and VDD, and the input cannot accept negative voltages with respect to GND. |
| 5 | AIN1 | input | Analog input 1; absolute input voltage must stay between GND and VDD, and it is connected to GND externally for single-ended measurements on the ADS1113. |
| 6 | NC | unconnected | No connect; leave floating or connect to GND. |
| 7 | NC | unconnected | No connect; leave floating or connect to GND. |
| 8 | VDD | power_in | Power supply, 2 V to 5.5 V relative to GND; connect a 0.1 µF decoupling capacitor to GND. |
| 9 | SDA | bidirectional | I2C serial data input and output; open-drain, requires a pullup resistor to VDD, and the digital input limit is GND - 0.3 V to 5.5 V. |
| 10 | SCL | input | I2C serial clock input; open-drain bus line requiring a pullup resistor to VDD, and the device never stretches the clock. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Global Sourcing Parts |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
ADS1113IDGST - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
ads1113idgst-etched.step/ads1113idgst-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ads1113idgst.step/ads1113idgst.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (57 pp, sha256
8b5524864b018672, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).