ADP7104ARDZ-5.0-R7

{
  "slug": "adp7104ardz-5-0-r7",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "adp7104ardz-5.0-r7",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "adp7104ardz-5-0-r7.kicad_sym",
    "adp7104ardz-5-0-r7.kicad_mod",
    "adp7104ardz-5-0-r7.glb",
    "adp7104ardz-5-0-r7.step",
    "adp7104ardz-5-0-r7.lbr",
    "docs/hero.png",
    "docs/adp7104ardz-5-0-r7-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "adp7104ardz-5-0-r7-hero.glb",
    "adp7104ardz-5-0-r7-hero.overlay.json"
  ],
  "component": {
    "mpn": "ADP7104ARDZ-5.0-R7",
    "manufacturer": "Analog Devices",
    "package": "SOIC-8-EP",
    "pin_count": 9,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586199022431952896",
    "parts": {
      "symbol": "adp7104ardz-5-0-r7.kicad_sym",
      "footprint": "adp7104ardz-5-0-r7.kicad_mod",
      "model_3d": "adp7104ardz-5-0-r7-hero.glb",
      "model_3d_plain": "adp7104ardz-5-0-r7.glb",
      "model_3d_step": "adp7104ardz-5-0-r7-etched.step",
      "model_3d_step_plain": "adp7104ardz-5-0-r7.step",
      "lbr": "adp7104ardz-5-0-r7.lbr"
    },
    "distributor_links": {
      "lcsc": "C132278",
      "mouser": "584-ADP7104ARDZ5.0R7"
    },
    "distributor_check": {
      "checked_at": "2026-10-09T22:56:38Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 540 calls left today"
      },
      "mouser": {
        "pn": "584-ADP7104ARDZ5.0R7",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VOUT",
        "type": "power_out",
        "description": "Regulated output voltage; bypass VOUT to GND with 1 µF or larger capacitor."
      },
      {
        "number": "2",
        "name": "SENSE/ADJ",
        "type": "input",
        "description": "For the fixed 5.0 V variant this pin is SENSE, which measures the actual output voltage at the load and feeds it to the error amplifier; place it as close to the load as possible to minimize IR drop effects."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "4",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect; do not connect to this pin."
      },
      {
        "number": "5",
        "name": "EN/UVLO",
        "type": "input",
        "description": "Enable input: drive high to turn the regulator on and low to turn it off, tie to VIN for automatic startup; absolute maximum rating is −0.3 V to VIN, and when used as programmable UVLO the thresholds are set by external resistors."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "7",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good output that requires an external pull-up to VIN or VOUT and goes low immediately in shutdown, current limit, thermal shutdown, or when VOUT falls below 90% of nominal; leave floating or connect to ground if unused, absolute maximum rating −0.3 V to VIN."
      },
      {
        "number": "8",
        "name": "VIN",
        "type": "power_in",
        "description": "Regulator input supply, operating range 3.3 V to 20 V with absolute maximum of +22 V to GND; bypass VIN to GND with 1 µF or larger capacitor."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet pin table and figure label this pin 'SENSE/ADJ'. Per the feature description (page 6),; The exposed pad is not numbered in the datasheet pin table or figure; it is listed as EPAD and inclu; PG is an open-drain output; the schema has no open-drain type, so it is typed as 'output'.",
          "exposed pad 9 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 28,
        "cost_usd": 0.1286,
        "at": "2026-10-09T22:54:31"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586199022431952896",
        "pages": 28,
        "sha256": "269a0ae0cec349ea",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "adp7104ardz-5-0-r7.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.55
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",
        "checked": "2026-10-09",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "adp7104ardz-5-0-r7-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.55
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "08d905b7a63e124737eb0a27811a0cb596a33f053f2f4afff1b5167e4692b58b",
        "checked": "2026-10-09",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}