Adom KiCad Library

@@ -1,3 +1,51 @@ # Adom KiCad Library -KiCad PCM library of Adom machine pin and machine contact footprints, symbols, and 3D models+KiCad footprints, schematic symbols, and 3D STEP models for Adom machine pins and+machine contacts, distributed through KiCad's Plugin and Content Manager.++## Install++Add this URL in KiCad under **Plugin and Content Manager** -> **Manage...** ->+**+**, then pick the repository from the dropdown and install from the+**Libraries** tab:++```+https://wiki.adom.inc/adom/adom-kicad-library/render/pcm/repository.json+```++## What is in it++| Footprint | Ref | Drill | Pad OD | Min pitch |+|---|---|---|---|---|+| `MachinePinMediumShort` | `MP` | 1.20 mm | 1.6 mm | 2 mm |+| `MachinePinMediumStandard` | `MP` | 1.20 mm | 1.6 mm | 2 mm |+| `MachinePinLargeShort` | `MP` | 3.45 mm | 5.2 mm | 6 mm |+| `MachinePinLargeStandard` | `MP` | 3.45 mm | 5.2 mm | 6 mm |+| `MachineContactMedium` | `MC` | 0.78 mm | 1.3 mm | 2 mm |+| `MachineContactLarge` | `MC` | 2.62 mm | 4.4 mm | 6 mm |++Two symbols cover all six: `MachinePin` and `MachineContact`. `Short` and+`Standard` differ only in tail length, so their pads are identical and they are+interchangeable on the board.++Drills are line-to-line with the pin shoulder rather than press-fits. The medium+pin's shoulder is 1.2 mm in diameter, hence the 1.20 mm drill.++## What this page is++This page is the **public distribution mirror**. It carries only the PCM feed+(`pcm/repository.json`, `pcm/packages.json`) and the release zip.++Source, history, and the release tooling live in the private GitHub repository+`adom-inc/adom-kicad-library`, which is also where the geometry is edited. That+repository is private, and `raw.githubusercontent.com` will not serve a private+repository to an unauthenticated client like KiCad, which is why distribution+happens here instead.++Dimensions originate further upstream still, in the tscircuit source library+`adom-inc/adom-tsci-library`. This release derives from+`@tsci/adom-inc.library` v1.1.15.++The package identifier is `com.github.adom-inc.adom-kicad-library`, matching the+GitHub feed, so KiCad treats the two as the same package rather than as two+parallel installs.