main
John Lauer 0.9.5: compliance prediction with bench calibration, certification readiness report e0da4a3

adom-fields 0.9.5

  • Compliance prediction (review.compliance).
    • The sources: every emission source the review models (the switching hot loop, each cable's common mode, an oscillator's copper, a receiver's oscillator leaking out of its antenna port, and the conducted emissions) in one table against the chosen limits.
    • Bands and verdicts: each source has an uncertainty band from its model's own error, and each test (radiated, conducted, antenna port) gets a verdict.
    • Fixes: ranked by the dB each buys per source. These cover a slower edge, spread spectrum, a smaller loop, a ferrite, a choke, moving a connector's ground, an input filter, RF isolation and a shield can. With them comes the cheapest combination that gets every source to 6 dB.
    • A bench plan: LISN, current clamp, near-field probe and antenna port, each with the level to expect.
    • Bench calibration: spec measurements move a prediction onto the bench's reading and narrow its band to ±2 dB. A cable reading also moves the other cables.
    • On the TPS54202 buck:
      • Predictions: radiated at risk (J2's cable −7 to +13 dB), conducted likely fail (−33.5 dB). The cheapest fix set is an input filter, spread spectrum and a 16 ns edge.
      • With a 9 dBµA clamp reading on J2: radiated becomes a thin pass, and the set drops to the input filter plus spread spectrum.
    • On the AM/FM receiver: the FM oscillator's leak out of the antenna port is 16 dB over FCC 15.111. An RF amplifier's isolation plus weaker LO coupling gets it to +9.6 dB.
  • Certification readiness report (adom-fields report).
    • Inputs: the fields solve, Adom Safety's creepage and clearance check, and Adom Mechanics' reliability screen.
    • Output: one Markdown and JSON report, with each area ready, needs work, blocked or not checked, its numbers and findings, what the report does not cover, and the evidence hashes.
    • The buck today: blocked by conducted emissions. Mechanics needs work (an 0805 inside a mounting pin's keep-out). The rest is ready.