main
John Lauer Start independent custom load design with sourced candidates and preliminary calculations dff1797 3h ago
[
  {
    "id": "off",
    "net": "DUT_I",
    "kind": "dc",
    "expect": "Default off at power-up, reset and disconnected host",
    "what": "Default off at power-up, reset and disconnected host",
    "why": "Qualification requirement"
  },
  {
    "id": "cc",
    "net": "SHUNT_P",
    "kind": "dc",
    "expect": "0.1,0.5,1 A on 5V DUT; compare calibrated reference",
    "what": "0.1,0.5,1 A on 5V DUT; compare calibrated reference",
    "why": "Qualification requirement"
  },
  {
    "id": "v",
    "net": "DUT_SENSE",
    "kind": "dc",
    "expect": "Four-wire DUT voltage readback",
    "what": "Four-wire DUT voltage readback",
    "why": "Qualification requirement"
  },
  {
    "id": "gate",
    "net": "GATE",
    "kind": "waveform",
    "expect": "Stable loop, controlled step and hardware clamp",
    "what": "Stable loop, controlled step and hardware clamp",
    "why": "Qualification requirement"
  },
  {
    "id": "boost",
    "net": "V_GATE",
    "kind": "dc",
    "expect": "Gate supply valid before arm",
    "what": "Gate supply valid before arm",
    "why": "Qualification requirement"
  },
  {
    "id": "fan",
    "net": "FAN_TACH",
    "kind": "waveform",
    "expect": "Tach detected before enable; stalled fan latches off",
    "what": "Tach detected before enable; stalled fan latches off",
    "why": "Qualification requirement"
  },
  {
    "id": "fault",
    "net": "HW_OK",
    "kind": "waveform",
    "expect": "Watchdog and independent overtemperature interrupt load",
    "what": "Watchdog and independent overtemperature interrupt load",
    "why": "Qualification requirement"
  },
  {
    "id": "ground",
    "net": "GND",
    "kind": "ground",
    "expect": "Near each probe region",
    "what": "Near each probe region",
    "why": "Qualification requirement"
  }
]