AI Flow
Public Made by Adomby adom
Adom's AI Flow: a tool to help the AI follow all of the steps it takes to build a board.
Astra run ready for the comparison video
Fable — Astra is ready for the comparison video.
Absolute run directory: /home/adom/aiflow-esc-astra.
Container/runtime reported by adom-codex context: {"system": "Linux", "kernel": "6.18.33.2-microsoft-standard-WSL2", "hostname": "AdomLapper", "cwd": "/home/adom/project"}. This is the local WSL2 Linux environment named AdomLapper; all remote KiCad operations used ConfRoomROG, never the AdomLapper or arav-rog desktop.
Final video: /home/adom/aiflow-esc-astra/final.mp4, 113.267 seconds, 7507507 bytes.
The original 78.5-minute delivery clock is unchanged. These walkthroughs, drawings, re-cuts and handover are post-delivery events. The full ledger includes the inter-request idle gap; it is not a replacement for the original delivery score.
The new independent thermal screen exceeds the 60 C hot-tab rise budget under both stated air scenarios. Q6 tab: +121 C still air, +70 C moving air; board peaks +122.5/+70.7 C. Do not narrate the historical heuristic pass as independent thermal qualification. Numerical assumptions and mesh sensitivity are on the page and in the source bundle.
The KiCad editor is fixed at 1920x1080 with the empty Properties panel hidden. Nets-2 is discarded after a mid-recording resize retained stale pixels; nets-3 is the clean replacement. The 3D viewer clip is painted and belongs to Astra PID 28912; the editor prelude is discarded. Some source footprints render as bare pads in 3D; no placement, routing or model geometry was borrowed from Fable.
Clock of record
{
"deliveredTime": "2026-09-14T04:32:32Z",
"finishTime": "2026-09-14T04:28:40Z",
"promptTime": "2026-09-14T03:14:00.700Z",
"startTime": "2026-09-14T03:15:44Z"
}
Every raw clip
Per-step media have no captions. Paths below are absolute. All seconds are ffprobe durations; discarded clips remain available as evidence. After binary recut, 0.233333 s of pure-black startup was removed from 14 action derivatives (3.267 s total); raw and 10x files were untouched. Original action copies are in action-cuts-before-black-trim/, with the exact file mapping in action-black-trim.json. Compose itself rebuilds motion from the 10x files; the final compose used tools/ffmpeg to seek past their measured black startup only on input, without modifying those files. The exact map is compose-input-startup-skip.json and the command trace is compose-ffmpeg-calls.jsonl. See the startup-frame giveback below. Fable should use the listed corrected action paths and avoid recut until that defect is fixed.
- placement-1
- raw:
/home/adom/aiflow-esc-astra/window-16521934-20260914-031801.mp4— 203.147033 s - 10x:
/home/adom/aiflow-esc-astra/window-16521934-20260914-031801-10x.mp4— 20.4 s - action:
/home/adom/aiflow-esc-astra/window-16521934-20260914-031801-action.mp4— 0.966667 s
- raw:
- routing-1
- raw:
/home/adom/aiflow-esc-astra/window-16521934-20260914-032131.mp4— 181.116267 s - 10x:
/home/adom/aiflow-esc-astra/window-16521934-20260914-032131-10x.mp4— 18.2 s - action:
/home/adom/aiflow-esc-astra/window-16521934-20260914-032131-action.mp4— 0.3 s
- raw:
- placement-2
- raw:
/home/adom/aiflow-esc-astra/window-16521934-20260914-032437.mp4— 74.3946 s - 10x:
/home/adom/aiflow-esc-astra/window-16521934-20260914-032437-10x.mp4— 7.466667 s - action:
/home/adom/aiflow-esc-astra/window-16521934-20260914-032437-action.mp4— 0.7 s
- raw:
- routing-2
- raw:
/home/adom/aiflow-esc-astra/window-16521934-20260914-032555.mp4— 881.049233 s - 10x:
/home/adom/aiflow-esc-astra/window-16521934-20260914-032555-10x.mp4— 88.133333 s - action:
/home/adom/aiflow-esc-astra/window-16521934-20260914-032555-action.mp4— 0.766667 s
- raw:
- placement-3
- raw:
/home/adom/aiflow-esc-astra/window-16521934-20260914-034100.mp4— 78.482167 s - 10x:
/home/adom/aiflow-esc-astra/window-16521934-20260914-034100-10x.mp4— 7.9 s - action:
/home/adom/aiflow-esc-astra/window-16521934-20260914-034100-action.mp4— 0.7 s
- raw:
- routing-3
- raw:
/home/adom/aiflow-esc-astra/window-16521934-20260914-034221.mp4— 175.901633 s - 10x:
/home/adom/aiflow-esc-astra/window-16521934-20260914-034221-10x.mp4— 17.666667 s - action:
/home/adom/aiflow-esc-astra/window-16521934-20260914-034221-action.mp4— 0.7 s
- raw:
- pours-1
- raw:
/home/adom/aiflow-esc-astra/window-16521934-20260914-034523.mp4— 106.8105 s - 10x:
/home/adom/aiflow-esc-astra/window-16521934-20260914-034523-10x.mp4— 10.733333 s - action:
/home/adom/aiflow-esc-astra/window-16521934-20260914-034523-action.mp4— 3.966667 s
- raw:
- routing-4
- raw:
/home/adom/aiflow-esc-astra/window-16521934-20260914-034714.mp4— 738.3802 s - 10x:
/home/adom/aiflow-esc-astra/window-16521934-20260914-034714-10x.mp4— 73.833333 s - action:
/home/adom/aiflow-esc-astra/window-16521934-20260914-034714-action.mp4— 51.466667 s
- raw:
- pours-2
- raw:
/home/adom/aiflow-esc-astra/window-16521934-20260914-040004.mp4— 445.4091 s - 10x:
/home/adom/aiflow-esc-astra/window-16521934-20260914-040004-10x.mp4— 44.6 s - action:
/home/adom/aiflow-esc-astra/window-16521934-20260914-040004-action.mp4— 23.266667 s
- raw:
- current-1
- raw:
/home/adom/aiflow-esc-astra/window-16521934-20260914-040746.mp4— 30.617 s - 10x:
/home/adom/aiflow-esc-astra/window-16521934-20260914-040746-10x.mp4— 3.1 s - action:
/home/adom/aiflow-esc-astra/window-16521934-20260914-040746-action.mp4— 0.3 s
- raw:
- thermal-1
- raw:
/home/adom/aiflow-esc-astra/window-16521934-20260914-040819.mp4— 33.5705 s - 10x:
/home/adom/aiflow-esc-astra/window-16521934-20260914-040819-10x.mp4— 3.433333 s - action:
/home/adom/aiflow-esc-astra/window-16521934-20260914-040819-action.mp4— 0.3 s
- raw:
- pours-3
- raw:
/home/adom/aiflow-esc-astra/window-16521934-20260914-040854.mp4— 235.220733 s - 10x:
/home/adom/aiflow-esc-astra/window-16521934-20260914-040854-10x.mp4— 23.6 s - action:
/home/adom/aiflow-esc-astra/window-16521934-20260914-040854-action.mp4— 7.266667 s
- raw:
- current-2
- raw:
/home/adom/aiflow-esc-astra/window-16521934-20260914-041256.mp4— 26.066467 s - 10x:
/home/adom/aiflow-esc-astra/window-16521934-20260914-041256-10x.mp4— 2.7 s - action:
/home/adom/aiflow-esc-astra/window-16521934-20260914-041256-action.mp4— 0.3 s
- raw:
- thermal-2
- raw:
/home/adom/aiflow-esc-astra/window-16521934-20260914-041323.mp4— 46.402867 s - 10x:
/home/adom/aiflow-esc-astra/window-16521934-20260914-041323-10x.mp4— 4.733333 s - action:
/home/adom/aiflow-esc-astra/window-16521934-20260914-041323-action.mp4— 0.3 s
- raw:
- capture-1
- raw:
/home/adom/aiflow-esc-astra/window-16521934-20260914-041412.mp4— 256.051433 s - 10x:
/home/adom/aiflow-esc-astra/window-16521934-20260914-041412-10x.mp4— 25.666667 s - action:
/home/adom/aiflow-esc-astra/window-16521934-20260914-041412-action.mp4— 1.266667 s
- raw:
- routing-5
- raw:
/home/adom/aiflow-esc-astra/window-16521934-20260914-041837.mp4— 364.464633 s - 10x:
/home/adom/aiflow-esc-astra/window-16521934-20260914-041837-10x.mp4— 36.533333 s - action:
/home/adom/aiflow-esc-astra/window-16521934-20260914-041837-action.mp4— 1.766667 s
- raw:
- pours-4
- raw:
/home/adom/aiflow-esc-astra/window-16521934-20260914-042453.mp4— 24.902767 s - 10x:
/home/adom/aiflow-esc-astra/window-16521934-20260914-042453-10x.mp4— 2.566667 s - action:
/home/adom/aiflow-esc-astra/window-16521934-20260914-042453-action.mp4— 1.266667 s
- raw:
- current-3
- raw:
/home/adom/aiflow-esc-astra/window-16521934-20260914-042520.mp4— 17.780967 s - 10x:
/home/adom/aiflow-esc-astra/window-16521934-20260914-042520-10x.mp4— 1.833333 s - action:
/home/adom/aiflow-esc-astra/window-16521934-20260914-042520-action.mp4— 0.3 s
- raw:
- thermal-3
- raw:
/home/adom/aiflow-esc-astra/window-16521934-20260914-042539.mp4— 24.796933 s - 10x:
/home/adom/aiflow-esc-astra/window-16521934-20260914-042539-10x.mp4— 2.566667 s - action:
/home/adom/aiflow-esc-astra/window-16521934-20260914-042539-action.mp4— 0.3 s
- raw:
- capture-2
- raw:
/home/adom/aiflow-esc-astra/window-16521934-20260914-042606.mp4— 110.542867 s - 10x:
/home/adom/aiflow-esc-astra/window-16521934-20260914-042606-10x.mp4— 11.133333 s - action:
/home/adom/aiflow-esc-astra/window-16521934-20260914-042606-action.mp4— 1.266667 s
- raw:
- finish-1
- raw:
/home/adom/aiflow-esc-astra/window-16521934-20260914-042801.mp4— 57.497633 s - 10x:
/home/adom/aiflow-esc-astra/window-16521934-20260914-042801-10x.mp4— 5.733333 s - action:
/home/adom/aiflow-esc-astra/window-16521934-20260914-042801-action.mp4— 0.3 s
- raw:
- nets-1
- raw:
/home/adom/aiflow-esc-astra/window-126550910-20260914-175644.mp4— 181.0913 s - 10x:
/home/adom/aiflow-esc-astra/window-126550910-20260914-175644-10x.mp4— 18.1 s - action:
/home/adom/aiflow-esc-astra/window-126550910-20260914-175644-action.mp4— 0.3 s
- raw:
- nets-2
- raw:
/home/adom/aiflow-esc-astra/window-8062990-20260914-180222.mp4— 754.388833 s - 10x:
/home/adom/aiflow-esc-astra/window-8062990-20260914-180222-10x.mp4— 75.466667 s - action:
/home/adom/aiflow-esc-astra/window-8062990-20260914-180222-action.mp4— 14.5 s - Excluded: Visual contact-sheet review: mid-recording resize preserved stale pixels; replaced by clean nets-3. Recorded capture mark and issue #9.
- raw:
- nets-3
- raw:
/home/adom/aiflow-esc-astra/window-8062990-20260914-182011.mp4— 108.770167 s - 10x:
/home/adom/aiflow-esc-astra/window-8062990-20260914-182011-10x.mp4— 10.9 s - action:
/home/adom/aiflow-esc-astra/window-8062990-20260914-182011-action.mp4— 10.966667 s
- raw:
- 3d-1
- raw:
/home/adom/aiflow-esc-astra/window-8062990-20260914-182236.mp4— 50.9332 s - 10x:
/home/adom/aiflow-esc-astra/window-8062990-20260914-182236-10x.mp4— 5.066667 s - action:
/home/adom/aiflow-esc-astra/window-8062990-20260914-182236-action.mp4— 1.0 s - Excluded: editor clip before the viewer opened; the viewer clip is this visit's camera
- raw:
- 3d-1
- raw:
/home/adom/aiflow-esc-astra/window-5378400-20260914-182327.mp4— 26.639433 s - 10x:
/home/adom/aiflow-esc-astra/window-5378400-20260914-182327-10x.mp4— 2.666667 s - action:
/home/adom/aiflow-esc-astra/window-5378400-20260914-182327-action.mp4— 12.266667 s
- raw:
- current-4
- raw:
/home/adom/aiflow-esc-astra/window-8062990-20260914-182415.mp4— 153.872167 s - 10x:
/home/adom/aiflow-esc-astra/window-8062990-20260914-182415-10x.mp4— 15.433333 s - action:
/home/adom/aiflow-esc-astra/window-8062990-20260914-182415-action.mp4— 6.466667 s
- raw:
- thermal-4
- raw:
/home/adom/aiflow-esc-astra/window-8062990-20260914-182715.mp4— 227.044267 s - 10x:
/home/adom/aiflow-esc-astra/window-8062990-20260914-182715-10x.mp4— 22.7 s - action:
/home/adom/aiflow-esc-astra/window-8062990-20260914-182715-action.mp4— 0.3 s
- raw:
- thermal-4
- raw:
/home/adom/aiflow-esc-astra/window-8062990-20260914-184043.mp4— 119.389167 s - 10x:
/home/adom/aiflow-esc-astra/window-8062990-20260914-184043-10x.mp4— 11.966667 s - action:
/home/adom/aiflow-esc-astra/window-8062990-20260914-184043-action.mp4— 4.766667 s
- raw:
- finish-2
- raw:
/home/adom/aiflow-esc-astra/window-8062990-20260914-184251.mp4— 119.079067 s - 10x:
/home/adom/aiflow-esc-astra/window-8062990-20260914-184251-10x.mp4— 11.933333 s - action:
/home/adom/aiflow-esc-astra/window-8062990-20260914-184251-action.mp4— 0.3 s
- raw:
The three drawings, in order
/home/adom/aiflow-esc-astra/astra-current-density.png(current-4, 1920x1080): Independent four-layer DC conduction solve of native filled polygons, tracks, pads and 473 plated barrels: F.Cu and B.Cu current density, with each loaded net peak annotated. The 0.1 mm stress-case solve gives 2.327 W copper loss; +VBAT peaks at 494 A/mm² and GND_OUT at 436 A/mm², with mesh-sensitive corner peaks and 0.3% total-loss change on refinement./home/adom/aiflow-esc-astra/astra-copper-heat-flow.png(thermal-4, 1920x1080): Own four-layer heat solve carries 6.427 W from the hot tabs and copper losses through native copper, dielectric and 473 plated barrels. F.Cu and B.Cu show watts per millimetre of width with via dots; each chip is labeled with its own along-layer and down-via heat within 4 mm, with full balanced splits and mesh sensitivity in the numerical report./home/adom/aiflow-esc-astra/astra-board-temperature.png(thermal-4, 1920x1080): The independent coupled solve fails the 60 C hot-tab rise budget: Q6 reaches +121 C in still air and +70 C with moving air; board peaks are +122.5 C and +70.7 C. Top-face temperature from the same 6.427 W solve uses h=10 and 25 W/m²K; results remain mesh-sensitive and are predictions under stated assumptions, not measured junction temperatures.
Source bundle: /home/adom/aiflow-esc-astra/astra-field-analysis-source.tar.gz; methods /home/adom/aiflow-esc-astra/analysis-method.md.
Returns to earlier steps
Original delivery per-step figures (minutes; frozen before post-delivery work):
| Step | Wall | Thinking | Tool |
|---|---|---|---|
| capture | 7.0 | 5.8 | 1.2 |
| current | 1.7 | 0.8 | 0.8 |
| finish | 4.6 | 4.1 | 0.5 |
| intake | 3.1 | 3.1 | 0.0 |
| other | 0.0 | 0.0 | 0.0 |
| placement | 6.4 | 5.6 | 0.8 |
| pours | 14.4 | 5.8 | 8.6 |
| routing | 39.4 | 19.1 | 20.3 |
| thermal | 1.9 | 1.4 | 0.5 |
Chronological returns, including post-delivery visits:
- 2026-09-14T03:24:31Z: placement-2 — First five routing passes left 21 connections blocked around U5 and U2; move nearby passives out of the pin escape corridors.
- 2026-09-14T03:25:50Z: routing-2 — Retry routing after opening U5 and U2 escape space; placement remains at 13 inherited DRC errors.
- 2026-09-14T03:40:34Z: placement-3 — Fresh-state and repaired-escape trials did not close routing. Spread remaining sense-divider and LED parts and align U5 pin centerlines to the 0.1 mm router grid.
- 2026-09-14T03:42:17Z: routing-3 — Retry the native router on grid-aligned U5 and the spread sense/LED parts; placement verified at 13 inherited errors.
- 2026-09-14T03:47:09Z: routing-4 — Missing GND and +3V3 inner planes are now present both locally and live. Re-run native connectivity gate before landing the zero-unrouted routing plan.
- 2026-09-14T03:59:29Z: pours-2 — Routing is now fully landed with zero unconnected. Add outer battery, phase, shunt-return and ground pours for current and thermal analysis.
- 2026-09-14T04:08:51Z: pours-3 — Thermal analysis estimates Q4 at 63 C rise against the unchanged 60 C budget; expand its connected rear phase-B copper and remeasure.
- 2026-09-14T04:12:47Z: current-2 — Recheck all loaded nets after the connected phase-B thermal extension and native refill.
- 2026-09-14T04:13:20Z: thermal-2 — All seven current checks pass after the phase-B extension; reevaluate Q4 against the same 60 C rise budget.
- 2026-09-14T04:18:28Z: routing-5 — Saved-board DRC found one manufacturing warning: two GND_OUT via holes have 0.1831 mm separation against 0.2495 mm minimum. Repair the local via geometry before finish.
- 2026-09-14T04:24:40Z: pours-4 — Remeasure native filled copper after the final via-spacing repair.
- 2026-09-14T04:25:16Z: current-3 — Recheck the unchanged electrical loads against copper measured after the final via repair.
- 2026-09-14T04:25:36Z: thermal-3 — Repeat the unchanged thermal checks against the final native copper measurement.
- 2026-09-14T04:26:03Z: capture-2 — Save and independently read back the repaired final board, including full saved-file DRC and preservation of every fixed interface.
- 2026-09-14T18:02:14Z: nets-2 — The first tour selected zero items because the IPC endpoint belonged to Fable; retake on the verified isolated Astra socket.
- 2026-09-14T18:20:03Z: nets-3 — Visual review found stale recorder pixels after a mid-take window resize; retake with fixed 1920x1080 framing and the unused Properties sidebar hidden.
- 2026-09-14T18:24:07Z: current-4 — the flow now asks for the AI's own current density drawing and a walkthrough of the pours the analysis judged
- 2026-09-14T18:27:07Z: thermal-4 — the flow now asks for the AI's own coupled copper and dielectric heat-flow solve, temperature drawing, and walkthrough of the judged pours
Plan-usage snapshots
Original start/end and post-delivery start recovered from timestamped harness observations; not backfilled into the ledger. Account-wide limits can move from other threads.
{
"source": "Timestamped Codex harness token_count rate_limits observations; recovered after delivery without backfilling the AI Flow ledger.",
"originalStartObservation": {
"at": "2026-09-14T03:14:09.822Z",
"primary": {
"used_percent": 52.0,
"window_minutes": 10080,
"resets_at": 1789815833
},
"secondary": null,
"planType": "prolite"
},
"originalEndObservation": {
"at": "2026-09-14T04:32:18.663Z",
"primary": {
"used_percent": 66.0,
"window_minutes": 10080,
"resets_at": 1789815833
},
"secondary": null,
"planType": "prolite"
},
"postdeliveryStartObservation": {
"at": "2026-09-14T17:48:24.984Z",
"primary": {
"used_percent": 66.0,
"window_minutes": 10080,
"resets_at": 1789815833
},
"secondary": null,
"planType": "prolite"
},
"note": "Limits are per account; other signed-in AI threads can move the same percentages. The original +14 percentage point delta is an upper bound on this run unless it was the only active thread. The primary window here is weekly; secondary was not exposed."
}
Latest post-delivery AI Flow snapshot:
{
"limits": [
{
"label": "5h",
"pct": 0.0,
"provider": "claude",
"resetsAt": "2026-09-14T22:39:59.966383+00:00"
},
{
"label": "week",
"pct": 56.0,
"provider": "claude",
"resetsAt": "2026-09-19T09:00:00.966405+00:00"
},
{
"label": "Fable",
"pct": 100.0,
"provider": "claude",
"resetsAt": "2026-09-19T09:00:00.966597+00:00"
},
{
"label": "week",
"pct": 80.0,
"plan": "prolite",
"provider": "codex"
}
],
"t": "2026-09-14T19:04:37Z",
"when": "manual"
}
Post-delivery harness start/end, token delta and limitations:
{
"start": {
"at": "2026-09-14T17:48:24.984Z",
"info": {
"total_token_usage": {
"input_tokens": 39242363,
"cached_input_tokens": 38470400,
"cache_write_input_tokens": 0,
"output_tokens": 75572,
"reasoning_output_tokens": 31183,
"total_tokens": 39317935
},
"last_token_usage": {
"input_tokens": 89734,
"cached_input_tokens": 12160,
"cache_write_input_tokens": 0,
"output_tokens": 151,
"reasoning_output_tokens": 0,
"total_tokens": 89885
},
"model_context_window": 258400
},
"rate_limits": {
"limit_id": "codex",
"limit_name": null,
"primary": {
"used_percent": 66.0,
"window_minutes": 10080,
"resets_at": 1789815833
},
"secondary": null,
"credits": {
"has_credits": false,
"unlimited": false,
"balance": "0"
},
"individual_limit": null,
"spend_control_reached": null,
"plan_type": "prolite",
"rate_limit_reached_type": null
}
},
"end": {
"at": "2026-09-14T19:04:37.338Z",
"info": {
"total_token_usage": {
"input_tokens": 73880682,
"cached_input_tokens": 72442240,
"cache_write_input_tokens": 0,
"output_tokens": 167967,
"reasoning_output_tokens": 69423,
"total_tokens": 74048649
},
"last_token_usage": {
"input_tokens": 188598,
"cached_input_tokens": 187904,
"cache_write_input_tokens": 0,
"output_tokens": 167,
"reasoning_output_tokens": 16,
"total_tokens": 188765
},
"model_context_window": 258400
},
"rate_limits": {
"limit_id": "codex",
"limit_name": null,
"primary": {
"used_percent": 80.0,
"window_minutes": 10080,
"resets_at": 1789815833
},
"secondary": null,
"credits": {
"has_credits": false,
"unlimited": false,
"balance": "0"
},
"individual_limit": null,
"spend_control_reached": null,
"plan_type": "prolite",
"rate_limit_reached_type": null
}
},
"deltaSinceStartObservation": {
"input_tokens": 34638319,
"cached_input_tokens": 33971840,
"cache_write_input_tokens": 0,
"output_tokens": 92395,
"reasoning_output_tokens": 38240,
"total_tokens": 34730714
},
"note": "Cumulative harness observations for post-delivery work. Final issue/report and response tokens after this observation are not yet exposed. No API price or dollar charge is supplied by this harness."
}
Dollar amounts remain null: the harness supplies no applicable API rate or billed dollars. Original token snapshot remains in run.json, with post-delivery accounting recorded separately under tokens.
Givebacks before this handover
- https://wiki.adom.inc/adom/adom-aiflow/issues/1 — None
- https://wiki.adom.inc/adom/adom-aiflow/issues/2 — None
- https://wiki.adom.inc/adom/adom-aiflow/issues/3 — None
- https://wiki.adom.inc/adom/adom-aiflow/issues/4 — None
- https://wiki.adom.inc/adom/adom-aiflow/issues/5 — None
- https://wiki.adom.inc/adom/adom-aiflow/issues/6 — None
- https://wiki.adom.inc/adom/adom-aiflow/issues/7 — None
- https://wiki.adom.inc/adom/adom-aiflow/issues/8 — Post-delivery tour targeting repair and semantic success validation.
- https://wiki.adom.inc/adom/adom-aiflow/issues/9 — Visually rejected nets-2 after window resize retained stale pixels; fresh fixed-size nets-3 take replaces it.
- https://wiki.adom.inc/adom/adom-aiflow/issues/10 — Own coupled DC/thermal source and refinement evidence: independent thermal rise exceeds the budget despite the historical heuristic pass.
- https://wiki.adom.inc/adom/adom-aiflow/issues/11 — Removed measured black startup from action derivatives, preserving raw and 10x clips, then recomposed; original action copies and exact trim map retained.
- https://wiki.adom.inc/adom/adom-aiflow/issues/12 — Bulk report push failed twice; bounded incremental uploads succeeded, with README last and every batch logged.
Complete ledger output
The wiki caps issue bodies at 65,536 characters. The attached handover-fable.md contains the complete requested handover, and ledger-postdelivery.txt contains the exact full tool output. For inline reading, this is ledger part 1; the unabridged continuation is posted as a comment immediately below. No ledger lines are omitted.
2026-09-14T03:15:44Z start engine "Codex (Astra)" prompt "2026-09-14T03:14:00.700Z"
2026-09-14T03:15:44Z turn 1 intake think 1.7 min start --board /home/adom/aiflow-esc-astra/source-unplaced.kicad_pcb --spec /home/adom/aiflow-esc-astra/spec.json --engine Codex (Astra) --prompt-time 2026-09-14T03:14:00.700Z --target ConfRoomROG --remote-board C:/Users/john/Downloads/adom-gate/esc-demo/aiflow/esc-g431-astra.kicad_pcb
2026-09-14T03:15:44Z end 1 intake tool 0.0 min OK run started for engine Codex (Astra) at /home/adom/aiflow-esc-astra; the clock started at the prompt, 2026-09-14T03:14:00.700Z
2026-09-14T03:15:55Z turn 2 intake think 0.2 min plan
2026-09-14T03:15:55Z end 2 intake tool 0.0 min OK plan for Codex (Astra): 149 footprints, 82 nets, 4 copper layers, 122 parked
2026-09-14T03:16:02Z turn 3 capture think 0.1 min capture open
2026-09-14T03:16:53Z end 3 capture tool 0.8 min OK board open, maximised, zoomed to fit (hwnd 16521934); recording budget for the whole run about 1500 MB (window capture, H.264 on the box's GPU, frames only when the screen changes); run drive 901007 M
2026-09-14T03:17:31Z turn 4 other think 0.6 min report --page adom/adom-aiflow --surface webview --push --refresh
2026-09-14T03:17:32Z end 4 other tool 0.0 min OK report built for adom/adom-aiflow: https://wiki.adom.inc/adom/adom-aiflow/files/docs/runs/source-unplaced-codex-astra-20260914-0314/README.md; pushed 1 files to adom/adom-aiflow/docs/runs/source-unpla
2026-09-14T03:18:00Z turn 5 placement think 0.5 min step placement
2026-09-14T03:18:00Z step placement visit 1
2026-09-14T03:18:01Z marker clip-start:placement-1
2026-09-14T03:18:04Z end 5 placement tool 0.1 min OK step placement; clip placement-1 recording (window 16521934; run drive 901006 MB free, test box 681491 MB free for a placement clip budgeted at 600 MB)
2026-09-14T03:20:07Z turn 6 placement think 2.0 min stage start place
2026-09-14T03:20:07Z end 6 placement tool 0.0 min OK stage place started at 2026-09-14T03:20:07Z by ai
2026-09-14T03:20:07Z turn 7 placement think 0.0 min place pack --wish /home/adom/aiflow-esc-astra/wishes.json --out /home/adom/aiflow-esc-astra/moves.json
2026-09-14T03:20:08Z end 7 placement tool 0.0 min OK legal spots for 120 of 122 parts:
2026-09-14T03:20:29Z turn 8 placement think 0.3 min place pack --wish /home/adom/aiflow-esc-astra/wishes.json --out /home/adom/aiflow-esc-astra/moves.json
2026-09-14T03:20:29Z end 8 placement tool 0.0 min OK legal spots for 122 of 122 parts:
2026-09-14T03:20:29Z turn 9 placement think 0.0 min place check --moves /home/adom/aiflow-esc-astra/moves.json
2026-09-14T03:20:31Z end 9 placement tool 0.0 min OK moved C1 (174.48, 58.73, 0) -> (116.90, 79.00, 90)
2026-09-14T03:21:08Z turn 10 placement think 0.6 min place land --moves /home/adom/aiflow-esc-astra/moves.json
2026-09-14T03:21:08Z stage place-land 0.0 min {"ok":true}
2026-09-14T03:21:08Z end 10 placement tool 0.0 min OK placement landed live as one undo step (revision 3082aa1e)
2026-09-14T03:21:23Z turn 11 placement think 0.2 min stage end place
2026-09-14T03:21:23Z stage place 1.3 min null
2026-09-14T03:21:23Z end 11 placement tool 0.0 min OK stage place ended at 2026-09-14T03:21:23Z
2026-09-14T03:21:23Z turn 12 routing think 0.0 min step routing
2026-09-14T03:21:23Z step routing visit 1
2026-09-14T03:21:30Z marker clip-start:routing-1
2026-09-14T03:21:34Z end 12 routing tool 0.2 min OK step routing, leaving placement; clip for placement stopped and pulled; clip routing-1 recording (window 16521934; run drive 900983 MB free, test box 681457 MB free for a routing clip budgeted at 400
2026-09-14T03:21:57Z turn 13 routing think 0.4 min route
2026-09-14T03:23:31Z stage route 1.6 min {"passes":5,"unrouted":21}
2026-09-14T03:23:31Z end 13 routing tool 1.6 min ERROR routing closed 21 connection(s) short after 5 passes: "+3V3" at "U5.36" ("no via site within 6 mm"); "+VBAT" at "U2.3" ("no path"); "/5V_EN" at "U2.2" ("no path"); "/COMP1_INM_IO1_BEMF_B" at "U5.12" (
2026-09-14T03:24:31Z turn 14 routing think 1.0 min giveback https://wiki.adom.inc/adom/adom-aiflow/issues/1
2026-09-14T03:24:31Z end 14 routing tool 0.0 min OK given back: https://wiki.adom.inc/adom/adom-aiflow/issues/1 (1 so far this run)
2026-09-14T03:24:31Z turn 15 routing think 0.0 min capture mark First router search finished 21 connections short; all waiting counted. Giveback issue 1 requests streamed progress.
2026-09-14T03:24:31Z marker First router search finished 21 connections short; all waiting counted. Giveback issue 1 requests streamed progress.
2026-09-14T03:24:31Z end 15 routing tool 0.0 min OK marker First router search finished 21 connections short; all waiting counted. Giveback issue 1 requests streamed progress. at 2026-09-14T03:24:31Z
2026-09-14T03:24:31Z turn 16 placement think 0.0 min step placement --back --why First five routing passes left 21 connections blocked around U5 and U2; move nearby passives out of the pin escape corridors.
2026-09-14T03:24:31Z step placement (back) visit 2: First five routing passes left 21 connections blocked around U5 and U2; move nearby passives out of the pin escape corridors.
2026-09-14T03:24:37Z marker clip-start:placement-2
2026-09-14T03:24:40Z end 16 placement tool 0.1 min OK step placement (back), leaving routing; clip for routing stopped and pulled; clip placement-2 (rework) recording (window 16521934; run drive 900967 MB free, test box 681426 MB free for a placement cli
2026-09-14T03:25:10Z turn 17 placement think 0.5 min place pack --wish /home/adom/aiflow-esc-astra/wishes-escape.json --out /home/adom/aiflow-esc-astra/moves-escape.json
2026-09-14T03:25:10Z end 17 placement tool 0.0 min OK legal spots for 36 of 36 parts:
2026-09-14T03:25:10Z turn 18 placement think 0.0 min place check --moves /home/adom/aiflow-esc-astra/moves-escape.json
2026-09-14T03:25:12Z end 18 placement tool 0.0 min OK moved C1 (116.90, 79.00, 90) -> (112.00, 79.00, 90)
2026-09-14T03:25:50Z turn 19 placement think 0.6 min place land --moves /home/adom/aiflow-esc-astra/moves-escape.json
2026-09-14T03:25:50Z stage place-land 0.0 min {"ok":true}
2026-09-14T03:25:50Z end 19 placement tool 0.0 min OK placement landed live as one undo step (revision ac418b6e)
2026-09-14T03:25:50Z turn 20 routing think 0.0 min step routing --back --why Retry routing after opening U5 and U2 escape space; placement remains at 13 inherited DRC errors.
2026-09-14T03:25:50Z step routing (back) visit 2: Retry routing after opening U5 and U2 escape space; placement remains at 13 inherited DRC errors.
2026-09-14T03:25:54Z marker clip-start:routing-2
2026-09-14T03:25:58Z end 20 routing tool 0.1 min OK step routing (back), leaving placement; clip for placement stopped and pulled; clip routing-2 (rework) recording (window 16521934; run drive 900956 MB free, test box 681405 MB free for a routing clip
2026-09-14T03:26:24Z turn 21 routing think 0.4 min route
2026-09-14T03:28:17Z stage route 1.9 min {"passes":5,"unrouted":8}
2026-09-14T03:28:17Z end 21 routing tool 1.9 min ERROR routing closed 8 connection(s) short after 5 passes: "+3V3" at "C30.1" ("no via site within 6 mm"); "/COMP1_INM_IO1_BEMF_B" at "U5.12" ("blocked by [\"/RPM\", \"/SWDIO\", \"/TIM1_CH1N_INLC\", \"/VDDA\
2026-09-14T03:29:35Z turn 22 routing think 1.3 min giveback https://wiki.adom.inc/adom/adom-aiflow/issues/2
2026-09-14T03:29:35Z end 22 routing tool 0.0 min OK given back: https://wiki.adom.inc/adom/adom-aiflow/issues/2 (2 so far this run)
2026-09-14T03:29:35Z turn 23 routing think 0.0 min route --passes 9
2026-09-14T03:32:54Z stage route 3.3 min {"passes":9,"unrouted":6}
2026-09-14T03:32:54Z end 23 routing tool 3.3 min ERROR routing closed 6 connection(s) short after 9 passes: "/COMP1_INM_IO1_BEMF_B" at "R29.2" ("blocked by [\"/NEUTRAL\", \"GND\"]"); "/COMP1_INM_IO1_BEMF_B" at "R30.2" ("blocked by [\"/COMP2_INM_IO1_BEMF_A
2026-09-14T03:33:22Z turn 24 routing think 0.5 min take route=ai
2026-09-14T03:33:22Z end 24 routing tool 0.0 min OK decisions recorded: {"route":"ai"}
2026-09-14T03:33:22Z turn 25 routing think 0.0 min stage start route
2026-09-14T03:33:22Z end 25 routing tool 0.0 min OK stage route started at 2026-09-14T03:33:22Z by ai
2026-09-14T03:33:22Z turn 26 routing think 0.0 min capture mark Nine binary passes left six connections. AI takes routing orchestration with fresh Router state each pass; same geometry rules and native gates retained.
2026-09-14T03:33:22Z marker Nine binary passes left six connections. AI takes routing orchestration with fresh Router state each pass; same geometry rules and native gates retained.
2026-09-14T03:33:22Z end 26 routing tool 0.0 min OK marker Nine binary passes left six connections. AI takes routing orchestration with fresh Router state each pass; same geometry rules and native gates retained. at 2026-09-14T03:33:22Z
2026-09-14T03:37:02Z turn 27 routing think 3.7 min capture mark Stopped fresh-state experiment after seven completed trials without beating six remaining connections. Testing restoration of cleared escape terminals before retrying.
2026-09-14T03:37:02Z marker Stopped fresh-state experiment after seven completed trials without beating six remaining connections. Testing restoration of cleared escape terminals before retrying.
2026-09-14T03:37:02Z end 27 routing tool 0.0 min OK marker Stopped fresh-state experiment after seven completed trials without beating six remaining connections. Testing restoration of cleared escape terminals before retrying. at 2026-09-14T03:37:02Z
2026-09-14T03:38:02Z turn 28 routing think 1.0 min giveback https://wiki.adom.inc/adom/adom-aiflow/issues/3
2026-09-14T03:38:02Z end 28 routing tool 0.0 min OK given back: https://wiki.adom.inc/adom/adom-aiflow/issues/3 (3 so far this run)
2026-09-14T03:38:02Z turn 29 routing think 0.0 min capture mark Escape-terminal regression fails on original source and passes with isolated helper repair; patch and test filed as issue 3.
2026-09-14T03:38:02Z marker Escape-terminal regression fails on original source and passes with isolated helper repair; patch and test filed as issue 3.
2026-09-14T03:38:02Z end 29 routing tool 0.0 min OK marker Escape-terminal regression fails on original source and passes with isolated helper repair; patch and test filed as issue 3. at 2026-09-14T03:38:02Z
2026-09-14T03:40:34Z turn 30 routing think 2.5 min stage end route
2026-09-14T03:40:34Z stage route 7.2 min null
2026-09-14T03:40:34Z end 30 routing tool 0.0 min OK stage route ended at 2026-09-14T03:40:34Z
2026-09-14T03:40:34Z turn 31 placement think 0.0 min step placement --back --why Fresh-state and repaired-escape trials did not close routing. Spread remaining sense-divider and LED parts and align U5 pin centerlines to the 0.1 mm router grid.
2026-09-14T03:40:34Z step placement (back) visit 3: Fresh-state and repaired-escape trials did not close routing. Spread remaining sense-divider and LED parts and align U5 pin centerlines to the 0.1 mm router grid.
2026-09-14T03:40:54Z turn 32 routing think 0.3 min place pack --wish /home/adom/aiflow-esc-astra/wishes-sense.json --out /home/adom/aiflow-esc-astra/moves-sense.json
2026-09-14T03:40:54Z end 32 routing tool 0.0 min OK legal spots for 12 of 12 parts:
2026-09-14T03:40:54Z turn 33 routing think 0.0 min place check --moves /home/adom/aiflow-esc-astra/moves-sense.json
2026-09-14T03:40:55Z end 33 routing tool 0.0 min OK moved C30 (132.90, 82.00, 90) -> (131.00, 89.00, 0)
2026-09-14T03:40:59Z marker clip-start:placement-3
2026-09-14T03:41:03Z end 31 placement tool 0.5 min OK step placement (back), leaving routing; clip for routing stopped and pulled; clip placement-3 (rework) recording (window 16521934; run drive 900753 MB free, test box 681644 MB free for a placement cli
2026-09-14T03:41:56Z turn 34 placement think 1.0 min capture mark I started placement pack/check before the previous step finished processing its clip. The overlapping step save dropped board-3 from the derived manifest and charged those two commands to routing. Ledger untouched; rerunning check sequentially to restore the accepted board reference.
2026-09-14T03:41:56Z marker I started placement pack/check before the previous step finished processing its clip. The overlapping step save dropped board-3 from the derived manifest and charged those two commands to routing. Ledger untouched; rerunning check sequentially to restore the accepted board reference.
2026-09-14T03:41:56Z end 34 placement tool 0.0 min OK marker I started placement pack/check before the previous step finished processing its clip. The overlapping step save dropped board-3 from the derived manifest and charged those two commands to routi
2026-09-14T03:41:56Z turn 35 placement think 0.0 min place check --moves /home/adom/aiflow-esc-astra/moves-sense.json
2026-09-14T03:41:58Z end 35 placement tool 0.0 min OK moved C30 (132.90, 82.00, 90) -> (131.00, 89.00, 0)
2026-09-14T03:42:16Z turn 36 placement think 0.3 min place land --moves /home/adom/aiflow-esc-astra/moves-sense.json
2026-09-14T03:42:17Z stage place-land 0.0 min {"ok":true}
2026-09-14T03:42:17Z end 36 placement tool 0.0 min OK placement landed live as one undo step (revision 1bcac9bd)
2026-09-14T03:42:17Z turn 37 placement think 0.0 min take route=binary
2026-09-14T03:42:17Z end 37 placement tool 0.0 min OK decisions recorded: {"route":"binary"}
2026-09-14T03:42:17Z turn 38 routing think 0.0 min step routing --back --why Retry the native router on grid-aligned U5 and the spread sense/LED parts; placement verified at 13 inherited errors.
2026-09-14T03:42:17Z step routing (back) visit 3: Retry the native router on grid-aligned U5 and the spread sense/LED parts; placement verified at 13 inherited errors.
2026-09-14T03:42:21Z marker clip-start:routing-3
2026-09-14T03:42:24Z end 38 routing tool 0.1 min OK step routing (back), leaving placement; clip for placement stopped and pulled; clip routing-3 (rework) recording (window 16521934; run drive 900742 MB free, test box 681621 MB free for a routing clip
2026-09-14T03:42:51Z turn 39 routing think 0.5 min giveback https://wiki.adom.inc/adom/adom-aiflow/issues/4
2026-09-14T03:42:51Z end 39 routing tool 0.0 min OK given back: https://wiki.adom.inc/adom/adom-aiflow/issues/4 (4 so far this run)
2026-09-14T03:42:51Z turn 40 routing think 0.0 min route
2026-09-14T03:43:46Z stage route 0.9 min {"passes":5,"unrouted":0}
2026-09-14T03:43:46Z end 40 routing tool 0.9 min OK routing closed: 0 unrouted after 5 passes; plan /home/adom/aiflow-esc-astra/plan-route.json
2026-09-14T03:44:06Z turn 41 routing think 0.3 min capture mark Grid-aligned MCU and spread passives closed routing: zero unrouted. Refitted native editor view. Proceeding to native DRC gate.
2026-09-14T03:44:06Z marker Grid-aligned MCU and spread passives closed routing: zero unrouted. Refitted native editor view. Proceeding to native DRC gate.
2026-09-14T03:44:06Z end 41 routing tool 0.0 min OK marker Grid-aligned MCU and spread passives closed routing: zero unrouted. Refitted native editor view. Proceeding to native DRC gate. at 2026-09-14T03:44:06Z
2026-09-14T03:44:06Z turn 42 routing think 0.0 min gate
2026-09-14T03:44:16Z stage gate 0.2 min {"inheritedErrors":13,"newErrors":0,"unconnected":97}
2026-09-14T03:44:16Z end 42 routing tool 0.2 min ERROR gate failed: 0 new DRC errors, 97 unconnected (inherited 13)
2026-09-14T03:45:16Z turn 43 pours think 1.0 min step pours --why Native gate found 97 unconnected items exclusively on GND and +3V3: clean source has no zones despite spec.planes. Create inner planes before route landing.
2026-09-14T03:45:16Z step pours visit 1: Native gate found 97 unconnected items exclusively on GND and +3V3: clean source has no zones despite spec.planes. Create inner planes before route landing.
2026-09-14T03:45:22Z marker clip-start:pours-1
2026-09-14T03:45:27Z end 43 pours tool 0.2 min OK step pours, leaving routing; clip for routing stopped and pulled; clip pours-1 recording (window 16521934; run drive 900714 MB free, test box 681589 MB free for a pours clip budgeted at 160 MB)
2026-09-14T03:45:47Z turn 44 pours think 0.3 min take pour=ai
2026-09-14T03:45:47Z end 44 pours tool 0.0 min OK decisions recorded: {"pour":"ai","route":"binary"}
2026-09-14T03:45:47Z turn 45 pours think 0.0 min stage start plane-preparation
2026-09-14T03:45:47Z end 45 pours tool 0.0 min OK stage plane-preparation started at 2026-09-14T03:45:47Z by binary
2026-09-14T03:45:47Z turn 46 pours think 0.0 min pour
2026-09-14T03:45:47Z stage pour 0.0 min {"keepouts":31,"vias":0,"zones":33}
2026-09-14T03:45:47Z end 46 pours tool 0.0 min OK pours planned: 33 zones (31 keepouts), 0 vias
2026-09-14T03:45:54Z turn 47 pours think 0.1 min land pours
2026-09-14T03:46:10Z stage land-pours 0.3 min {"failed":0,"groups":3}
2026-09-14T03:46:10Z end 47 pours tool 0.3 min OK pours landed: copper per layer before {} after {"B.Cu":0.0,"F.Cu":0.0,"In1.Cu":4460.42,"In2.Cu":4333.69}
2026-09-14T03:47:09Z turn 48 pours think 1.0 min capture mark Added matching inner-plane geometry to separate local board-with-inner-planes.kicad_pcb through AI helper and adopted it in derived boards list. Original and placed checkpoints preserved; live planes natively landed and filled.
2026-09-14T03:47:09Z marker Added matching inner-plane geometry to separate local board-with-inner-planes.kicad_pcb through AI helper and adopted it in derived boards list. Original and placed checkpoints preserved; live planes natively landed and filled.
2026-09-14T03:47:09Z end 48 pours tool 0.0 min OK marker Added matching inner-plane geometry to separate local board-with-inner-planes.kicad_pcb through AI helper and adopted it in derived boards list. Original and placed checkpoints preserved; live
2026-09-14T03:47:09Z turn 49 pours think 0.0 min giveback https://wiki.adom.inc/adom/adom-aiflow/issues/5
2026-09-14T03:47:09Z end 49 pours tool 0.0 min OK given back: https://wiki.adom.inc/adom/adom-aiflow/issues/5 (5 so far this run)
2026-09-14T03:47:09Z turn 50 pours think 0.0 min stage end plane-preparation
2026-09-14T03:47:09Z stage plane-preparation 1.4 min null
2026-09-14T03:47:09Z end 50 pours tool 0.0 min OK stage plane-preparation ended at 2026-09-14T03:47:09Z
2026-09-14T03:47:09Z turn 51 routing think 0.0 min step routing --back --why Missing GND and +3V3 inner planes are now present both locally and live. Re-run native connectivity gate before landing the zero-unrouted routing plan.
2026-09-14T03:47:09Z step routing (back) visit 4: Missing GND and +3V3 inner planes are now present both locally and live. Re-run native connectivity gate before landing the zero-unrouted routing plan.
2026-09-14T03:47:14Z marker clip-start:routing-4
2026-09-14T03:47:18Z end 51 routing tool 0.1 min OK step routing (back), leaving pours; clip for pours stopped and pulled; clip routing-4 (rework) recording (window 16521934; run drive 900654 MB free, test box 681566 MB free for a routing clip budgeted
2026-09-14T03:47:24Z turn 52 routing think 0.1 min gate
2026-09-14T03:47:35Z stage gate 0.2 min {"inheritedErrors":13,"newErrors":0,"unconnected":0}
2026-09-14T03:47:35Z end 52 routing tool 0.2 min OK gate passed: 0 new DRC errors (13 inherited), 0 unconnected; copper {"copperLengthMm":2666.68,"entries":116,"nets":59,"segments":4040,"segmentsByWidth":{"0.2":86,"0.25":3084,"0.5":523,"1":347},"vias":
2026-09-14T03:48:01Z turn 53 routing think 0.4 min land route
2026-09-14T03:59:11Z stage land-route 11.2 min {"accepted":116,"entries":116,"wallSeconds":669.8}
2026-09-14T03:59:11Z end 53 routing tool 11.2 min OK route landed live: 116 entries, one undo step each, 669.9 s
2026-09-14T03:59:29Z turn 54 routing think 0.3 min capture mark All 116 routing entries accepted live in 669.9 seconds; KiCad now reports zero unconnected.
2026-09-14T03:59:29Z marker All 116 routing entries accepted live in 669.9 seconds; KiCad now reports zero unconnected.
2026-09-14T03:59:29Z end 54 routing tool 0.0 min OK marker All 116 routing entries accepted live in 669.9 seconds; KiCad now reports zero unconnected. at 2026-09-14T03:59:29Z
2026-09-14T03:59:29Z turn 55 pours think 0.0 min step pours --back --why Routing is now fully landed with zero unconnected. Add outer battery, phase, shunt-return and ground pours for current and thermal analysis.
2026-09-14T03:59:29Z step pours (back) visit 2: Routing is now fully landed with zero unconnected. Add outer battery, phase, shunt-return and ground pours for current and thermal analysis.
2026-09-14T04:00:04Z marker clip-start:pours-2
2026-09-14T04:00:09Z end 55 pours tool 0.7 min OK step pours (back), leaving routing; clip for routing stopped and pulled; clip pours-2 (rework) recording (window 16521934; run drive 900533 MB free, test box 681406 MB free for a pours clip budgeted a
2026-09-14T04:00:16Z turn 56 pours think 0.1 min take pour=binary
2026-09-14T04:00:16Z end 56 pours tool 0.0 min OK decisions recorded: {"pour":"binary","route":"binary"}
2026-09-14T04:00:16Z turn 57 pours think 0.0 min pour
2026-09-14T04:00:16Z stage pour 0.0 min {"keepouts":31,"vias":19,"zones":45}
2026-09-14T04:00:16Z end 57 pours tool 0.0 min OK pours planned: 45 zones (31 keepouts), 19 vias
2026-09-14T04:00:16Z turn 58 pours think 0.0 min land vias
2026-09-14T04:02:26Z stage land-vias 2.1 min {"accepted":19,"entries":19,"wallSeconds":128.3}
2026-09-14T04:02:26Z end 58 pours tool 2.2 min OK vias landed live: 19 entries, one undo step each, 128.3 s
2026-09-14T04:02:34Z turn 59 pours think 0.1 min land pours
2026-09-14T04:02:46Z stage land-pours 0.2 min {"failed":1,"groups":2}
2026-09-14T04:02:46Z end 59 pours tool 0.2 min ERROR pour for GND refused by the preflight: "drc_rejected" {"starved_thermal": 3}
2026-09-14T04:03:14Z turn 60 pours think 0.5 min capture mark Outer GND pour preflight refused three starved thermal connections: MC18.1 on B.Cu, C36.2 and C9.2 on F.Cu. Add targeted solid joints at these pads; preserve clearance rules.
2026-09-14T04:03:14Z marker Outer GND pour preflight refused three starved thermal connections: MC18.1 on B.Cu, C36.2 and C9.2 on F.Cu. Add targeted solid joints at these pads; preserve clearance rules.
2026-09-14T04:03:14Z end 60 pours tool 0.0 min OK marker Outer GND pour preflight refused three starved thermal connections: MC18.1 on B.Cu, C36.2 and C9.2 on F.Cu. Add targeted solid joints at these pads; preserve clearance rules. at 2026-09-14T04:0
2026-09-14T04:03:14Z turn 61 pours think 0.0 min pour
2026-09-14T04:03:14Z stage pour 0.0 min {"keepouts":31,"vias":19,"zones":48}
2026-09-14T04:03:14Z end 61 pours tool 0.0 min OK pours planned: 48 zones (31 keepouts), 19 vias
2026-09-14T04:03:14Z turn 62 pours think 0.0 min land pours
2026-09-14T04:03:54Z stage land-pours 0.7 min {"failed":1,"groups":3}
2026-09-14T04:03:54Z end 62 pours tool 0.7 min ERROR pour for +VBAT refused by the preflight: "drc_rejected" {"starved_thermal": 1}
2026-09-14T04:04:31Z turn 63 pours think 0.6 min capture mark Ground pour now passes; adding the battery region exposed one starved ground thermal at U1.1. Add a local solid ground joint and retry.
2026-09-14T04:04:31Z marker Ground pour now passes; adding the battery region exposed one starved ground thermal at U1.1. Add a local solid ground joint and retry.
2026-09-14T04:04:31Z end 63 pours tool 0.0 min OK marker Ground pour now passes; adding the battery region exposed one starved ground thermal at U1.1. Add a local solid ground joint and retry. at 2026-09-14T04:04:31Z
2026-09-14T04:04:31Z turn 64 pours think 0.0 min pour
2026-09-14T04:04:31Z stage pour 0.0 min {"keepouts":31,"vias":19,"zones":49}
2026-09-14T04:04:31Z end 64 pours tool 0.0 min OK pours planned: 49 zones (31 keepouts), 19 vias
2026-09-14T04:04:31Z turn 65 pours think 0.0 min land pours
2026-09-14T04:07:06Z stage land-pours 2.6 min {"failed":0,"groups":7}
2026-09-14T04:07:06Z end 65 pours tool 2.6 min OK pours landed: copper per layer before {"B.Cu":2939.16,"F.Cu":2460.49,"In1.Cu":4129.04,"In2.Cu":3963.14} after {"B.Cu":3107.89,"F.Cu":2891.08,"In1.Cu":4129.04,"In2.Cu":3963.14}
2026-09-14T04:07:10Z turn 66 pours think 0.1 min measure
2026-09-14T04:07:14Z stage measure 0.1 min {"filledAreaByLayerMm2":{"B.Cu":3107.89,"F.Cu":2891.08,"In1.Cu":4129.04,"In2.Cu":3963.14}}
2026-09-14T04:07:14Z end 66 pours tool 0.1 min OK copper kept per layer (KiCad's fills): {"B.Cu":3107.89,"F.Cu":2891.08,"In1.Cu":4129.04,"In2.Cu":3963.14}; coverage {"B.Cu":65.62,"F.Cu":61.04,"In1.Cu":87.18,"In2.Cu":83.68}
2026-09-14T04:07:27Z turn 67 current think 0.2 min step current
2026-09-14T04:07:27Z step current visit 1
2026-09-14T04:07:46Z marker clip-start:current-1
2026-09-14T04:07:50Z end 67 current tool 0.4 min OK step current, leaving pours; clip for pours stopped and pulled; clip current-1 recording (window 16521934; run drive 900469 MB free, test box 681306 MB free for a current clip budgeted at 60 MB)
2026-09-14T04:08:07Z turn 68 current think 0.3 min analyze current
2026-09-14T04:08:07Z stage analyze-current 0.0 min {"pass":true}
2026-09-14T04:08:07Z end 68 current tool 0.0 min OK current analysis passed:
2026-09-14T04:08:15Z turn 69 thermal think 0.1 min step thermal
2026-09-14T04:08:15Z step thermal visit 1
2026-09-14T04:08:18Z marker clip-start:thermal-1
2026-09-14T04:08:23Z end 69 thermal tool 0.1 min OK step thermal, leaving current; clip for current stopped and pulled; clip thermal-1 recording (window 16521934; run drive 900454 MB free, test box 681299 MB free for a thermal clip budgeted at 60 MB)
2026-09-14T04:08:42Z turn 70 thermal think 0.3 min analyze thermal
2026-09-14T04:08:42Z stage analyze-thermal 0.0 min {"pass":false}
2026-09-14T04:08:42Z end 70 thermal tool 0.0 min ERROR thermal analysis failed:
2026-09-14T04:08:51Z turn 71 pours think 0.1 min step pours --back --why Thermal analysis estimates Q4 at 63 C rise against the unchanged 60 C budget; expand its connected rear phase-B copper and remeasure.
2026-09-14T04:08:51Z step pours (back) visit 3: Thermal analysis estimates Q4 at 63 C rise against the unchanged 60 C budget; expand its connected rear phase-B copper and remeasure.
2026-09-14T04:08:54Z marker clip-start:pours-3
2026-09-14T04:08:59Z end 71 pours tool 0.1 min OK step pours (back), leaving thermal; clip for thermal stopped and pulled; clip pours-3 (rework) recording (window 16521934; run drive 900442 MB free, test box 681291 MB free for a pours clip budgeted a
2026-09-14T04:09:29Z turn 72 pours think 0.5 min pour
2026-09-14T04:09:29Z stage pour 0.0 min {"keepouts":31,"vias":19,"zones":49}
2026-09-14T04:09:29Z end 72 pours tool 0.0 min OK pours planned: 49 zones (31 keepouts), 19 vias
2026-09-14T04:09:29Z turn 73 pours think 0.0 min land pours
2026-09-14T04:10:07Z stage land-pours 0.6 min {"failed":0,"groups":3}
2026-09-14T04:10:07Z end 73 pours tool 0.6 min OK pours landed: copper per layer before {"B.Cu":3107.89,"F.Cu":2891.08,"In1.Cu":4129.04,"In2.Cu":3963.14} after {"B.Cu":3108.53,"F.Cu":2891.08,"In1.Cu":4129.04,"In2.Cu":3963.14}
2026-09-14T04:10:22Z turn 74 pours think 0.2 min measure
2026-09-14T04:10:25Z stage measure 0.1 min {"filledAreaByLayerMm2":{"B.Cu":3108.53,"F.Cu":2891.08,"In1.Cu":4129.04,"In2.Cu":3963.14}}
2026-09-14T04:10:25Z end 74 pours tool 0.1 min OK copper kept per layer (KiCad's fills): {"B.Cu":3108.53,"F.Cu":2891.08,"In1.Cu":4129.04,"In2.Cu":3963.14}; coverage {"B.Cu":65.64,"F.Cu":61.04,"In1.Cu":87.18,"In2.Cu":83.68}
2026-09-14T04:11:25Z turn 75 pours think 1.0 min capture mark Q4 left-arm expansion grew the outline by 76.7 mm2 but filled phase-B copper by only 0.67 mm2; disconnected area was dropped. Replace with a connected right-side extension beside MC9.
2026-09-14T04:11:25Z marker Q4 left-arm expansion grew the outline by 76.7 mm2 but filled phase-B copper by only 0.67 mm2; disconnected area was dropped. Replace with a connected right-side extension beside MC9.
2026-09-14T04:11:25Z end 75 pours tool 0.0 min OK marker Q4 left-arm expansion grew the outline by 76.7 mm2 but filled phase-B copper by only 0.67 mm2; disconnected area was dropped. Replace with a connected right-side extension beside MC9. at 2026-0
2026-09-14T04:11:26Z turn 76 pours think 0.0 min pour
2026-09-14T04:11:26Z stage pour 0.0 min {"keepouts":31,"vias":19,"zones":49}
2026-09-14T04:11:26Z end 76 pours tool 0.0 min OK pours planned: 49 zones (31 keepouts), 19 vias
2026-09-14T04:11:26Z turn 77 pours think 0.0 min land pours
2026-09-14T04:12:01Z stage land-pours 0.6 min {"failed":0,"groups":3}
2026-09-14T04:12:01Z end 77 pours tool 0.6 min OK pours landed: copper per layer before {"B.Cu":3108.53,"F.Cu":2891.08,"In1.Cu":4129.04,"In2.Cu":3963.14} after {"B.Cu":3169.87,"F.Cu":2891.08,"In1.Cu":4129.04,"In2.Cu":3963.14}
2026-09-14T04:12:24Z turn 78 pours think 0.4 min measure
2026-09-14T04:12:26Z stage measure 0.0 min {"filledAreaByLayerMm2":{"B.Cu":3169.87,"F.Cu":2891.08,"In1.Cu":4129.04,"In2.Cu":3963.14}}
2026-09-14T04:12:26Z end 78 pours tool 0.0 min OK copper kept per layer (KiCad's fills): {"B.Cu":3169.87,"F.Cu":2891.08,"In1.Cu":4129.04,"In2.Cu":3963.14}; coverage {"B.Cu":66.93,"F.Cu":61.04,"In1.Cu":87.18,"In2.Cu":83.68}
2026-09-14T04:12:47Z turn 79 current think 0.3 min step current --back --why Recheck all loaded nets after the connected phase-B thermal extension and native refill.
2026-09-14T04:12:47Z step current (back) visit 2: Recheck all loaded nets after the connected phase-B thermal extension and native refill.
2026-09-14T04:12:55Z marker clip-start:current-2
2026-09-14T04:13:03Z end 79 current tool 0.3 min OK step current (back), leaving pours; clip for pours stopped and pulled; clip current-2 (rework) recording (window 16521934; run drive 900412 MB free, test box 681247 MB free for a current clip budgeted
2026-09-14T04:13:20Z turn 80 current think 0.3 min analyze current
2026-09-14T04:13:20Z stage analyze-current 0.0 min {"pass":true}
2026-09-14T04:13:20Z end 80 current tool 0.0 min OK current analysis passed:
2026-09-14T04:13:20Z turn 81 thermal think 0.0 min step thermal --back --why All seven current checks pass after the phase-B extension; reevaluate Q4 against the same 60 C rise budget.
2026-09-14T04:13:20Z step thermal (back) visit 2: All seven current checks pass after the phase-B extension; reevaluate Q4 against the same 60 C rise budget.
2026-09-14T04:13:23Z marker clip-start:thermal-2
2026-09-14T04:13:29Z end 81 thermal tool 0.1 min OK step thermal (back), leaving current; clip for current stopped and pulled; clip thermal-2 (rework) recording (window 16521934; run drive 900401 MB free, test box 681237 MB free for a thermal clip budg
2026-09-14T04:13:53Z turn 82 thermal think 0.4 min analyze thermal
2026-09-14T04:13:53Z stage analyze-thermal 0.0 min {"pass":true}
2026-09-14T04:13:53Z end 82 thermal tool 0.0 min OK thermal analysis passed:
2026-09-14T04:14:09Z turn 83 capture think 0.3 min step capture --why Both analyses pass. Save the native board, pull it back, verify the 27 fixed interfaces and run DRC on the saved result before finish.
2026-09-14T04:14:09Z step capture visit 1: Both analyses pass. Save the native board, pull it back, verify the 27 fixed interfaces and run DRC on the saved result before finish.
2026-09-14T04:14:12Z marker clip-start:capture-1
2026-09-14T04:14:18Z end 83 capture tool 0.1 min OK step capture, leaving thermal; clip for thermal stopped and pulled; clip capture-1 recording (window 16521934; run drive 900387 MB free, test box 681216 MB free for a capture clip budgeted at 60 MB)
2026-09-14T04:18:28Z turn 84 routing think 4.2 min step routing --back --why Saved-board DRC found one manufacturing warning: two GND_OUT via holes have 0.1831 mm separation against 0.2495 mm minimum. Repair the local via geometry before finish.
2026-09-14T04:18:28Z step routing (back) visit 5: Saved-board DRC found one manufacturing warning: two GND_OUT via holes have 0.1831 mm separation against 0.2495 mm minimum. Repair the local via geometry before finish.
2026-09-14T04:18:37Z marker clip-start:routing-5
2026-09-14T04:18:45Z end 84 routing tool 0.3 min OK step routing (back), leaving capture; clip for capture stopped and pulled; clip routing-5 (rework) recording (window 16521934; run drive 900349 MB free, test box 681182 MB free for a routing clip budg
2026-09-14T04:19:18Z turn 85 routing think 0.6 min giveback https://wiki.adom.inc/adom/adom-aiflow/issues/6
2026-09-14T04:19:18Z end 85 routing tool 0.0 min OK given back: https://wiki.adom.inc/adom/adom-aiflow/issues/6 (6 so far this run)
2026-09-14T04:19:18Z turn 86 routing think 0.0 min take route=ai
2026-09-14T04:19:18Z end 86 routing tool 0.0 min OK decisions recorded: {"pour":"binary","route":"ai"}
2026-09-14T04:19:18Z turn 87 routing think 0.0 min stage start route
2026-09-14T04:19:18Z end 87 routing tool 0.0 min OK stage route started at 2026-09-14T04:19:18Z by ai
2026-09-14T04:24:06Z turn 88 routing think 4.8 min gate
2026-09-14T04:24:19Z stage gate 0.2 min {"inheritedErrors":13,"newErrors":0,"unconnected":0}
2026-09-14T04:24:19Z end 88 routing tool 0.2 min OK gate passed: 0 new DRC errors (13 inherited), 0 unconnected; copper {"copperLengthMm":2666.97,"entries":116,"nets":59,"segments":4042,"segmentsByWidth":{"0.2":86,"0.25":3086,"0.5":523,"1":347},"vias":
2026-09-14T04:24:24Z turn 89 routing think 0.1 min stage end route
2026-09-14T04:24:24Z stage route 5.1 min null
2026-09-14T04:24:24Z end 89 routing tool 0.0 min OK stage route ended at 2026-09-14T04:24:24Z
2026-09-14T04:24:34Z turn 90 routing think 0.2 min capture mark Via repair passed native and canonical gates: zero unconnected, 13 inherited errors, zero hole-spacing warnings. Replaced one GND_OUT via and added two short links; all verification and recovery time remains counted.
2026-09-14T04:24:34Z marker Via repair passed native and canonical gates: zero unconnected, 13 inherited errors, zero hole-spacing warnings. Replaced one GND_OUT via and added two short links; all verification and recovery time remains counted.
2026-09-14T04:24:34Z end 90 routing tool 0.0 min OK marker Via repair passed native and canonical gates: zero unconnected, 13 inherited errors, zero hole-spacing warnings. Replaced one GND_OUT via and added two short links; all verification and recover
2026-09-14T04:24:40Z turn 91 pours think 0.1 min step pours --back --why Remeasure native filled copper after the final via-spacing repair.
2026-09-14T04:24:40Z step pours (back) visit 4: Remeasure native filled copper after the final via-spacing repair.
2026-09-14T04:24:52Z marker clip-start:pours-4
2026-09-14T04:25:00Z end 91 pours tool 0.3 min OK step pours (back), leaving routing; clip for routing stopped and pulled; clip pours-4 (rework) recording (window 16521934; run drive 900306 MB free, test box 681112 MB free for a pours clip budgeted a
2026-09-14T04:25:04Z turn 92 pours think 0.1 min measure
2026-09-14T04:25:07Z stage measure 0.1 min {"filledAreaByLayerMm2":{"B.Cu":3169.87,"F.Cu":2891.08,"In1.Cu":4128.9,"In2.Cu":3963.0}}
2026-09-14T04:25:07Z end 92 pours tool 0.1 min OK copper kept per layer (KiCad's fills): {"B.Cu":3169.87,"F.Cu":2891.08,"In1.Cu":4128.9,"In2.Cu":3963.0}; coverage {"B.Cu":66.93,"F.Cu":61.04,"In1.Cu":87.18,"In2.Cu":83.68}
2026-09-14T04:25:16Z turn 93 current think 0.1 min step current --back --why Recheck the unchanged electrical loads against copper measured after the final via repair.
2026-09-14T04:25:16Z step current (back) visit 3: Recheck the unchanged electrical loads against copper measured after the final via repair.
2026-09-14T04:25:20Z marker clip-start:current-3
2026-09-14T04:25:27Z end 93 current tool 0.2 min OK step current (back), leaving pours; clip for pours stopped and pulled; clip current-3 (rework) recording (window 16521934; run drive 900293 MB free, test box 681093 MB free for a current clip budgeted
2026-09-14T04:25:31Z turn 94 current think 0.1 min analyze current
2026-09-14T04:25:31Z stage analyze-current 0.0 min {"pass":true}
2026-09-14T04:25:31Z end 94 current tool 0.0 min OK current analysis passed:
2026-09-14T04:25:36Z turn 95 thermal think 0.1 min step thermal --back --why Repeat the unchanged thermal checks against the final native copper measurement.