main
Ray Publish 0.1.0 e8c05e3

ADM8324WAH29ARJZR7

Analog Devices · Monitors & Reset Circuits · SOT-23-5

ADM8324WAH29ARJZR7 from Analog Devices, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 RESET output Active low reset output that is asserted whenever VCC is below the reset threshold VTH; on the ADM8324 it is an open-drain output stage that needs an external pull-up resistor to a rail no higher than VCC, where 10 kΩ is adequate in most situations.
2 GND power_in Ground reference pin for the device.
3 MR input Active low manual reset input that generates a reset when forced low for longer than the glitch filter time, with an internal 75 kΩ pull-up resistor and VIL max of 0.8 V and VIH min of 2.0 V.
4 WDI input Watchdog input that generates a reset if the WDI pulse is not within the watchdog window, with VIL of 0.3 × VCC and VIH of 0.7 × VCC, and that must not be left floating.
5 VCC power_in Power supply voltage being monitored, with an operating voltage range of 0.9 V to 5.5 V and an absolute maximum rating of −0.3 V to +6 V.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC Operating Voltage Range VCC 0.9 5.5 V 3
VCC that Guarantees Valid Output 0.9 V 3
Supply Current 10 20 µA VCC = 5.5 V, WDI = 0 V 3
Supply Current 10 18 µA VCC = 3.6 V, WDI = 0 V 3
Reset threshold voltage (29 option, 2.93 V) VTH 2.901 2.93 2.959 V TA = 25°C 12
Reset threshold voltage (29 option, 2.93 V) VTH 2.886 2.974 V TA = −40°C to +125°C 12
Reset Threshold Temperature Coefficient 20 ppm/°C 3
Reset Timeout Period, Option A 1 1.4 1.8 ms 3
VCC to RESET Delay tRD 90 µs VCC falling at 1 mV/µs 3
RESET Output Voltage (open-drain) 0.2 V VCC ≥ 0.9 V, ISINK = 25 µA 3
RESET Output Voltage (open-drain) 0.3 V VCC ≥ 4.5 V, ISINK = 3.2 mA 3
Open-Drain Reset Output Leakage Current 1 µA 3
Watchdog Timeout Period (Fast), Option H tWD-FAST 512 768 ms 3
Watchdog Timeout Period (Slow), Option H tWD-SLOW 1.24 1.86 sec 3
WDI Pulse Width 200 ns VIL = 0.3 × VCC, VIH = 0.7 × VCC 4
WDI Glitch Immunity 100 ns 4
WDI Input Current 0.35 1 µA VWDI = VCC 4
WDI Input Current -1 -0.35 µA VWDI = 0 V 4
MR Input Low Voltage VIL 0.8 V 4
MR Input High Voltage VIH 2 V 4
MR Input Pulse Width 1 µs 4
MR Glitch Rejection 100 ns 4
MR Pull-Up Resistance 35 75 125 kΩ 4
MR to Reset Delay 350 ns VCC = 5 V 4
VCC Absolute Maximum VCC -0.3 6 V 5
All Other Pins Absolute Maximum (lower limit) -0.3 V 5
Output Current (RESET) 20 mA 5
Operating Temperature Range TA -40 125 °C 5
Storage Temperature Range -65 150 °C 5
Lead Temperature, Soldering (10 sec) 300 °C 10 s 5
Lead Temperature, Vapor Phase (60 sec) 215 °C 60 s 5
Lead Temperature, Infrared (15 sec) 220 °C 15 s 5
θJA Thermal Impedance, SOT-23 θJA 270 °C/W 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: ADM8324WAH29ARJZR7
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: adm8324wah29arjzr7-etched.step / adm8324wah29arjzr7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adm8324wah29arjzr7.step / adm8324wah29arjzr7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (15 pp, sha256 2e142987a5ff802e, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF