3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownADM8324WAH29ARJZR7
Analog Devices · Monitors & Reset Circuits · SOT-23-5
ADM8324WAH29ARJZR7 from Analog Devices, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET | output | Active low reset output that is asserted whenever VCC is below the reset threshold VTH; on the ADM8324 it is an open-drain output stage that needs an external pull-up resistor to a rail no higher than VCC, where 10 kΩ is adequate in most situations. |
| 2 | GND | power_in | Ground reference pin for the device. |
| 3 | MR | input | Active low manual reset input that generates a reset when forced low for longer than the glitch filter time, with an internal 75 kΩ pull-up resistor and VIL max of 0.8 V and VIH min of 2.0 V. |
| 4 | WDI | input | Watchdog input that generates a reset if the WDI pulse is not within the watchdog window, with VIL of 0.3 × VCC and VIH of 0.7 × VCC, and that must not be left floating. |
| 5 | VCC | power_in | Power supply voltage being monitored, with an operating voltage range of 0.9 V to 5.5 V and an absolute maximum rating of −0.3 V to +6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Operating Voltage Range | VCC | 0.9 | 5.5 | V | 3 | ||
| VCC that Guarantees Valid Output | 0.9 | V | 3 | ||||
| Supply Current | 10 | 20 | µA | VCC = 5.5 V, WDI = 0 V | 3 | ||
| Supply Current | 10 | 18 | µA | VCC = 3.6 V, WDI = 0 V | 3 | ||
| Reset threshold voltage (29 option, 2.93 V) | VTH | 2.901 | 2.93 | 2.959 | V | TA = 25°C | 12 |
| Reset threshold voltage (29 option, 2.93 V) | VTH | 2.886 | 2.974 | V | TA = −40°C to +125°C | 12 | |
| Reset Threshold Temperature Coefficient | 20 | ppm/°C | 3 | ||||
| Reset Timeout Period, Option A | 1 | 1.4 | 1.8 | ms | 3 | ||
| VCC to RESET Delay | tRD | 90 | µs | VCC falling at 1 mV/µs | 3 | ||
| RESET Output Voltage (open-drain) | 0.2 | V | VCC ≥ 0.9 V, ISINK = 25 µA | 3 | |||
| RESET Output Voltage (open-drain) | 0.3 | V | VCC ≥ 4.5 V, ISINK = 3.2 mA | 3 | |||
| Open-Drain Reset Output Leakage Current | 1 | µA | 3 | ||||
| Watchdog Timeout Period (Fast), Option H | tWD-FAST | 512 | 768 | ms | 3 | ||
| Watchdog Timeout Period (Slow), Option H | tWD-SLOW | 1.24 | 1.86 | sec | 3 | ||
| WDI Pulse Width | 200 | ns | VIL = 0.3 × VCC, VIH = 0.7 × VCC | 4 | |||
| WDI Glitch Immunity | 100 | ns | 4 | ||||
| WDI Input Current | 0.35 | 1 | µA | VWDI = VCC | 4 | ||
| WDI Input Current | -1 | -0.35 | µA | VWDI = 0 V | 4 | ||
| MR Input Low Voltage | VIL | 0.8 | V | 4 | |||
| MR Input High Voltage | VIH | 2 | V | 4 | |||
| MR Input Pulse Width | 1 | µs | 4 | ||||
| MR Glitch Rejection | 100 | ns | 4 | ||||
| MR Pull-Up Resistance | 35 | 75 | 125 | kΩ | 4 | ||
| MR to Reset Delay | 350 | ns | VCC = 5 V | 4 | |||
| VCC Absolute Maximum | VCC | -0.3 | 6 | V | 5 | ||
| All Other Pins Absolute Maximum (lower limit) | -0.3 | V | 5 | ||||
| Output Current (RESET) | 20 | mA | 5 | ||||
| Operating Temperature Range | TA | -40 | 125 | °C | 5 | ||
| Storage Temperature Range | -65 | 150 | °C | 5 | |||
| Lead Temperature, Soldering (10 sec) | 300 | °C | 10 s | 5 | |||
| Lead Temperature, Vapor Phase (60 sec) | 215 | °C | 60 s | 5 | |||
| Lead Temperature, Infrared (15 sec) | 220 | °C | 15 s | 5 | |||
| θJA Thermal Impedance, SOT-23 | θJA | 270 | °C/W | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
ADM8324WAH29ARJZR7 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
adm8324wah29arjzr7-etched.step/adm8324wah29arjzr7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adm8324wah29arjzr7.step/adm8324wah29arjzr7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (15 pp, sha256
2e142987a5ff802e, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).