main
Ray
Publish 0.1.0
b6543af
ADM825SYRJZ-R7
Analog Devices · Monitors & Reset Circuits · SOT-23-5
ADM825SYRJZ-R7 from Analog Devices, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ~{RESET} | output | Active low, push-pull reset output, asserted whenever VCC is below the reset threshold VTH. |
| 2 | GND | power_in | Ground. |
| 3 | RESET | output | Active high, push-pull reset output. |
| 4 | ~{MR} | input | Active low manual reset input that generates a reset when forced low for at least 1 µs, with a 52 kΩ internal pull-up. |
| 5 | VCC | power_in | Power supply voltage being monitored. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23-5 |
| Category | Power Management |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reset Threshold Voltage (ADM82xS) | VTH | 2.89 | 2.93 | 2.96 | V | TA = 25°C | 3 |
| Reset Threshold Voltage (ADM82xS) | VTH | 2.85 | 3 | V | TA = TMIN to TMAX | 3 | |
| Supply Current (ADM82xT/S/R/Z/Y) | 5 | 12 | µA | WDI and MR unconnected | 3 | ||
| VCC Operating Voltage Range | VCC | 1 | 5.5 | V | TA = 0°C to 70°C | 3 | |
| VCC Operating Voltage Range | VCC | 1.2 | V | TA = TMIN to TMAX | 3 | ||
| Reset Timeout Period | tRP | 140 | 200 | 280 | ms | 3 | |
| RESET Output Voltage low (ADM82xT/S/R/Z/Y) | 0.3 | V | VCC = VTH min, ISINK = 1.2 mA | 3 | |||
| RESET Output Voltage low at VCC falling | 0.3 | V | TA = 0°C to 70°C, VCC = 1 V, VCC falling, ISINK = 50 µA | 3 | |||
| RESET Output Voltage (ADM824, ADM825) low (ADM82xT/S/R/Z/Y) | 0.3 | V | VCC = VTH max, ISINK = 1.2 mA | 3 | |||
| MR Input Pulse Width | 1 | µs | 4 | ||||
| MR Pull-Up Resistance | 35 | 52 | 75 | kΩ | 4 | ||
| Reset Threshold Temperature Coefficient | 40 | ppm/°C | 3 | ||||
| Reset Threshold Hysteresis (ADM82xT/S/R/Z/Y) | 5 | mV | 3 | ||||
| VCC to Reset Delay | tRD | 40 | µs | VTH − VCC = 100 mV | 3 | ||
| MR Glitch Rejection | 100 | ns | 4 | ||||
| MR to Reset Delay | 500 | ns | 4 | ||||
| VCC supply range for ADM82xS | VCC | 3 | 3.6 | V | ADM82xS specification range, TA = TMIN to TMAX | 3 | |
| Supply Voltage | VCC | -0.3 | 6 | V | TA = 25°C | 5 | |
| Output Current (RESET, RESET) | 20 | mA | TA = 25°C | 5 | |||
| Operating Temperature Range | -40 | 125 | °C | 5 | |||
| Storage Temperature Range | -65 | 150 | °C | 5 | |||
| Thermal Impedance θJA SOT-23 | θJA | 270 | °C/W | SOT-23 | 5 | ||
| Lead Temperature Soldering | 300 | °C | 10 sec | 5 | |||
| Lead Temperature Vapor Phase | 215 | °C | 60 sec | 5 | |||
| Lead Temperature Infrared | 220 | °C | 15 sec | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
ADM825SYRJZ-R7 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.2 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
adm825syrjz-r7-etched.step/adm825syrjz-r7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adm825syrjz-r7.step/adm825syrjz-r7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (12 pp, sha256
8a8e4ed5fab4f9c4, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# ADM825SYRJZ-R7
**Analog Devices** · Monitors & Reset Circuits · SOT-23-5
ADM825SYRJZ-R7 from Analog Devices, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ~{RESET} | output | Active low, push-pull reset output, asserted whenever VCC is below the reset threshold VTH. |
| 2 | GND | power_in | Ground. |
| 3 | RESET | output | Active high, push-pull reset output. |
| 4 | ~{MR} | input | Active low manual reset input that generates a reset when forced low for at least 1 µs, with a 52 kΩ internal pull-up. |
| 5 | VCC | power_in | Power supply voltage being monitored. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23-5 |
| Category | Power Management |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reset Threshold Voltage (ADM82xS) | VTH | 2.89 | 2.93 | 2.96 | V | TA = 25°C | 3 |
| Reset Threshold Voltage (ADM82xS) | VTH | 2.85 | | 3 | V | TA = TMIN to TMAX | 3 |
| Supply Current (ADM82xT/S/R/Z/Y) | | | 5 | 12 | µA | WDI and MR unconnected | 3 |
| VCC Operating Voltage Range | VCC | 1 | | 5.5 | V | TA = 0°C to 70°C | 3 |
| VCC Operating Voltage Range | VCC | 1.2 | | | V | TA = TMIN to TMAX | 3 |
| Reset Timeout Period | tRP | 140 | 200 | 280 | ms | | 3 |
| RESET Output Voltage low (ADM82xT/S/R/Z/Y) | | | | 0.3 | V | VCC = VTH min, ISINK = 1.2 mA | 3 |
| RESET Output Voltage low at VCC falling | | | | 0.3 | V | TA = 0°C to 70°C, VCC = 1 V, VCC falling, ISINK = 50 µA | 3 |
| RESET Output Voltage (ADM824, ADM825) low (ADM82xT/S/R/Z/Y) | | | | 0.3 | V | VCC = VTH max, ISINK = 1.2 mA | 3 |
| MR Input Pulse Width | | 1 | | | µs | | 4 |
| MR Pull-Up Resistance | | 35 | 52 | 75 | kΩ | | 4 |
| Reset Threshold Temperature Coefficient | | | 40 | | ppm/°C | | 3 |
| Reset Threshold Hysteresis (ADM82xT/S/R/Z/Y) | | | 5 | | mV | | 3 |
| VCC to Reset Delay | tRD | | 40 | | µs | VTH − VCC = 100 mV | 3 |
| MR Glitch Rejection | | | 100 | | ns | | 4 |
| MR to Reset Delay | | | 500 | | ns | | 4 |
| VCC supply range for ADM82xS | VCC | 3 | | 3.6 | V | ADM82xS specification range, TA = TMIN to TMAX | 3 |
| Supply Voltage | VCC | -0.3 | | 6 | V | TA = 25°C | 5 |
| Output Current (RESET, RESET) | | | | 20 | mA | TA = 25°C | 5 |
| Operating Temperature Range | | -40 | | 125 | °C | | 5 |
| Storage Temperature Range | | -65 | | 150 | °C | | 5 |
| Thermal Impedance θJA SOT-23 | θJA | | 270 | | °C/W | SOT-23 | 5 |
| Lead Temperature Soldering | | | | 300 | °C | 10 sec | 5 |
| Lead Temperature Vapor Phase | | | | 215 | °C | 60 sec | 5 |
| Lead Temperature Infrared | | | | 220 | °C | 15 sec | 5 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `ADM825SYRJZ-R7`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.2 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `adm825syrjz-r7-etched.step` / `adm825syrjz-r7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `adm825syrjz-r7.step` / `adm825syrjz-r7.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/ADM823_824_825.pdf) (12 pp, sha256 `8a8e4ed5fab4f9c4`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/adm825syrjz-r7-datasheet.pdf)