Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ADM825SYRJZ-R7

Analog Devices · Monitors & Reset Circuits · SOT-23-5

ADM825SYRJZ-R7 from Analog Devices, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 ~{RESET} output Active low, push-pull reset output, asserted whenever VCC is below the reset threshold VTH.
2 GND power_in Ground.
3 RESET output Active high, push-pull reset output.
4 ~{MR} input Active low manual reset input that generates a reset when forced low for at least 1 µs, with a 52 kΩ internal pull-up.
5 VCC power_in Power supply voltage being monitored.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOT-23-5
Category Power Management
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reset Threshold Voltage (ADM82xS) VTH 2.89 2.93 2.96 V TA = 25°C 3
Reset Threshold Voltage (ADM82xS) VTH 2.85 3 V TA = TMIN to TMAX 3
Supply Current (ADM82xT/S/R/Z/Y) 5 12 µA WDI and MR unconnected 3
VCC Operating Voltage Range VCC 1 5.5 V TA = 0°C to 70°C 3
VCC Operating Voltage Range VCC 1.2 V TA = TMIN to TMAX 3
Reset Timeout Period tRP 140 200 280 ms 3
RESET Output Voltage low (ADM82xT/S/R/Z/Y) 0.3 V VCC = VTH min, ISINK = 1.2 mA 3
RESET Output Voltage low at VCC falling 0.3 V TA = 0°C to 70°C, VCC = 1 V, VCC falling, ISINK = 50 µA 3
RESET Output Voltage (ADM824, ADM825) low (ADM82xT/S/R/Z/Y) 0.3 V VCC = VTH max, ISINK = 1.2 mA 3
MR Input Pulse Width 1 µs 4
MR Pull-Up Resistance 35 52 75 kΩ 4
Reset Threshold Temperature Coefficient 40 ppm/°C 3
Reset Threshold Hysteresis (ADM82xT/S/R/Z/Y) 5 mV 3
VCC to Reset Delay tRD 40 µs VTH − VCC = 100 mV 3
MR Glitch Rejection 100 ns 4
MR to Reset Delay 500 ns 4
VCC supply range for ADM82xS VCC 3 3.6 V ADM82xS specification range, TA = TMIN to TMAX 3
Supply Voltage VCC -0.3 6 V TA = 25°C 5
Output Current (RESET, RESET) 20 mA TA = 25°C 5
Operating Temperature Range -40 125 °C 5
Storage Temperature Range -65 150 °C 5
Thermal Impedance θJA SOT-23 θJA 270 °C/W SOT-23 5
Lead Temperature Soldering 300 °C 10 sec 5
Lead Temperature Vapor Phase 215 °C 60 sec 5
Lead Temperature Infrared 220 °C 15 sec 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: ADM825SYRJZ-R7
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.2 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: adm825syrjz-r7-etched.step / adm825syrjz-r7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adm825syrjz-r7.step / adm825syrjz-r7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (12 pp, sha256 8a8e4ed5fab4f9c4, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF