main
Ray Publish 0.1.0 7a97126
{
  "slug": "adm691aarwz",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Monitors & Reset Circuits, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management",
    "adm691aarwz-reel",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "adm691aarwz.kicad_sym",
    "adm691aarwz.kicad_mod",
    "adm691aarwz.glb",
    "adm691aarwz.step",
    "adm691aarwz.lbr",
    "docs/hero.png",
    "docs/adm691aarwz-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "adm691aarwz-hero.glb",
    "adm691aarwz-hero.overlay.json"
  ],
  "component": {
    "mpn": "ADM691AARWZ",
    "manufacturer": "Analog Devices",
    "package": "SOIC-16-300mil",
    "pin_count": 16,
    "category": "Power Management",
    "subcategory": "Monitors & Reset Circuits",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADM691A_693A_800LM.pdf",
    "parts": {
      "symbol": "adm691aarwz.kicad_sym",
      "footprint": "adm691aarwz.kicad_mod",
      "model_3d": "adm691aarwz-hero.glb",
      "model_3d_plain": "adm691aarwz.glb",
      "model_3d_step": "adm691aarwz-etched.step",
      "model_3d_step_plain": "adm691aarwz.step",
      "lbr": "adm691aarwz.lbr"
    },
    "distributor_links": {
      "lcsc": "C658382",
      "digikey": "505-ADM691AARWZ-REELTR-ND",
      "mouser": "584-ADM691AARWZ-R"
    },
    "distributor_check": {
      "checked_at": "2026-11-12T19:25:05Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-ADM691AARWZ-REELTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-ADM691AARWZ-R",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VBATT",
        "type": "power_in",
        "description": "Backup battery input for an external battery or capacitor (operating range 0 to 5.5 V); connect to ground if no backup battery is used."
      },
      {
        "number": "2",
        "name": "VOUT",
        "type": "power_out",
        "description": "Output to which VCC or VBATT is internally switched, whichever is at the higher potential, supplying up to 250 mA from VCC; connect to VCC if no backup battery is used."
      },
      {
        "number": "3",
        "name": "VCC",
        "type": "power_in",
        "description": "+5 V power supply input (4.75 V to 5.5 V for ADM691A/ADM800L, 4.5 V to 5.5 V for ADM693A/ADM800M)."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "0 V ground reference for all signals."
      },
      {
        "number": "5",
        "name": "BATT ON",
        "type": "output",
        "description": "Logic output that goes high when VOUT is switched to VBATT and low when switched to VCC; can drive the base (via a resistor) of an external PNP transistor to raise output current above 250 mA."
      },
      {
        "number": "6",
        "name": "LOW LINE",
        "type": "output",
        "description": "Logic output that goes low when VCC falls below the reset threshold and returns high as soon as VCC rises above it."
      },
      {
        "number": "7",
        "name": "OSC IN",
        "type": "input",
        "description": "Oscillator input: with OSC SEL high or floating, low selects 100 ms and floating selects 1.6 s watchdog timeout; with OSC SEL low it takes an external clock or capacitor to GND setting reset and watchdog timing."
      },
      {
        "number": "8",
        "name": "OSC SEL",
        "type": "input",
        "description": "Oscillator select input: floating or high selects the internal oscillator, low enables the external OSC IN; has a 10 µA internal pullup."
      },
      {
        "number": "9",
        "name": "PFI",
        "type": "input",
        "description": "Noninverting power fail comparator input with 1.25 V threshold (PFO goes low when PFI is below 1.25 V); connect to GND or VOUT when not used."
      },
      {
        "number": "10",
        "name": "PFO",
        "type": "output",
        "description": "Power fail comparator output that goes low when PFI is less than 1.25 V."
      },
      {
        "number": "11",
        "name": "WDI",
        "type": "input",
        "description": "Three-level watchdog input: RESET pulses low and WDO goes low if WDI stays high or low longer than the timeout period; watchdog is disabled if WDI is floating or driven to midsupply."
      },
      {
        "number": "12",
        "name": "CEOUT",
        "type": "output",
        "description": "Chip enable output that goes low only when CEIN is low and VCC is above the reset threshold; held high when VCC is below the threshold (stays low for 15 µs or until CEIN goes high if CEIN was low at reset assertion)."
      },
      {
        "number": "13",
        "name": "CEIN",
        "type": "input",
        "description": "Chip enable input to the CE gating circuit; connect to GND or VOUT if not used."
      },
      {
        "number": "14",
        "name": "WDO",
        "type": "output",
        "description": "Watchdog logic output that goes low if WDI remains high or low longer than the watchdog timeout period and is set high by the next WDI transition."
      },
      {
        "number": "15",
        "name": "~{RESET}",
        "type": "output",
        "description": "Active-low reset output that goes low if VCC falls below the reset threshold and stays low for 200 ms typ after VCC rises above it."
      },
      {
        "number": "16",
        "name": "RESET",
        "type": "output",
        "description": "Active-high reset output, the inverse (complement) of the active-low RESET output, described as open-drain."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The MPN ADM691AARWZ-REEL is not listed in the datasheet. The closest ordering entry is ADM691AARW (R; The overbar was lost in text extraction, so pins 15 and 16 both read 'RESET'. Pin 15 is the active-l; The datasheet does not state the pin type for pin 16 in KiCad terms; it is described as an open-drai"
        ],
        "pages_sent": 12,
        "cost_usd": 0.0972,
        "at": "2026-11-12T19:24:46"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADM691A_693A_800LM.pdf",
        "pages": 12,
        "sha256": "21aaacfd42c57a27",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "adm691aarwz.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "adm691aarwz-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4a5a01afbc4bdd167f2e25606bbc559f5d9944da94629d65adb6f5455dec2db9",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}