main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers adm6823tyrjz: viewers rendered from the public page · Ray
adm6823tyrjz-etched.glb adm6823tyrjz: factory component page (tier=mfr) · Ray
adm6823tyrjz-etched.step adm6823tyrjz: factory component page (tier=mfr) · Ray
adm6823tyrjz-hero.glb adm6823tyrjz: hero GLB from the etched model (keeps the MPN mark) · Ray
adm6823tyrjz-hero.overlay.json adm6823tyrjz: hero GLB from the etched model (keeps the MPN mark) · Ray
adm6823tyrjz.glb Publish 0.1.0 · Ray
adm6823tyrjz.kicad_mod Publish 0.1.0 · Ray
adm6823tyrjz.kicad_sym Publish 0.1.0 · Ray
adm6823tyrjz.lbr Publish 0.1.0 · Ray
adm6823tyrjz.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 5 pins · Ray

ADM6823TYRJZ-RL7

Analog Devices · Monitors & Reset Circuits · SOT-23-5

ADM6823TYRJZ-RL7 from Analog Devices, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 RESET output Active-low push-pull reset output for the ADM6823, asserted whenever VCC is below the reset threshold VTH and also when MR is driven low or the watchdog times out.
2 GND power_in Ground reference for the device.
3 MR input Active-low manual reset input that generates a reset when forced low for at least 1 μs and has a 50 kΩ internal pull-up (25 kΩ min, 75 kΩ max).
4 WDI input Watchdog input that generates a reset if its voltage remains low or high for the watchdog timeout (1.12 s min, 1.6 s typ, 2.40 s max); the timer clears on any logic transition, and leaving WDI floating disables the watchdog.
5 VCC power_in Power supply voltage being monitored by the supervisor, with absolute maximum rating of −0.3 V to +6 V.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC Operating Voltage Range VCC 1 5.5 V 3
Supply Current 10 20 μA WDI and MR unconnected, VCC = 5.5 V 3
Supply Current 7 16 μA WDI and MR unconnected, VCC = 3.6 V 3
RESET Threshold Voltage (ADM682xT) 3 3.08 3.15 V 3
RESET Threshold Temperature Coefficient 60 ppm/°C 3
VCC to RESET Delay 20 μs VTH − VCC = 100 mV 3
RESET Timeout Period 140 200 280 ms 3
RESET Output Voltage VOL (Push-Pull or Open-Drain) VOL 0.3 V VCC >= 1 V, ISINK = 50 μA 3
RESET Output Voltage VOL (Push-Pull or Open-Drain) VOL 0.4 V VCC >= 4.25 V, ISINK = 3.2 mA 3
RESET Output Voltage VOL (Push-Pull Only) VOL 0.3 V VCC >= 1.8 V, ISINK = 500 μA 3
RESET Output Voltage VOL (Push-Pull Only) VOL 0.4 V VCC >= 4.75 V, ISINK = 3.2 mA 3
MR Input Pulse Width 1 μs 3
MR Glitch Rejection 100 ns 3
MR to Reset Delay 200 ns 3
MR Pull-Up Resistance 25 50 75 kΩ 3
Watchdog Timeout Period 1.12 1.6 2.4 sec 4
WDI Pulse Width 50 ns 4
WDI Input Current 120 160 μA VWDI = VCC 4
WDI Input Current -20 -15 μA VWDI = 0 4
VCC Supply Voltage (ADM682_T/S/R test range) VCC 2.7 3.6 V ADM682_T/S/R 3
VCC (supply voltage, with respect to GND) VCC -0.3 6 V 5
Output Current (RESET, RESET) 20 mA 5
Operating Temperature Range -40 125 °C 5
Storage Temperature Range -65 150 °C 5
Soldering Temperature (Sn/Pb) 240 °C Sn/Pb, 30 sec 5
Soldering Temperature (Pb-Free) 260 °C Pb-free, 40 sec 5
θJA Thermal Impedance θJA 170 °C/W 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: ADM6823TYRJZ-RL7
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: adm6823tyrjz-etched.step / adm6823tyrjz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adm6823tyrjz.step / adm6823tyrjz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (12 pp, sha256 ae605624fcf39cd7, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF