3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownADM6823TYRJZ-RL7
Analog Devices · Monitors & Reset Circuits · SOT-23-5
ADM6823TYRJZ-RL7 from Analog Devices, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET | output | Active-low push-pull reset output for the ADM6823, asserted whenever VCC is below the reset threshold VTH and also when MR is driven low or the watchdog times out. |
| 2 | GND | power_in | Ground reference for the device. |
| 3 | MR | input | Active-low manual reset input that generates a reset when forced low for at least 1 μs and has a 50 kΩ internal pull-up (25 kΩ min, 75 kΩ max). |
| 4 | WDI | input | Watchdog input that generates a reset if its voltage remains low or high for the watchdog timeout (1.12 s min, 1.6 s typ, 2.40 s max); the timer clears on any logic transition, and leaving WDI floating disables the watchdog. |
| 5 | VCC | power_in | Power supply voltage being monitored by the supervisor, with absolute maximum rating of −0.3 V to +6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Operating Voltage Range | VCC | 1 | 5.5 | V | 3 | ||
| Supply Current | 10 | 20 | μA | WDI and MR unconnected, VCC = 5.5 V | 3 | ||
| Supply Current | 7 | 16 | μA | WDI and MR unconnected, VCC = 3.6 V | 3 | ||
| RESET Threshold Voltage (ADM682xT) | 3 | 3.08 | 3.15 | V | 3 | ||
| RESET Threshold Temperature Coefficient | 60 | ppm/°C | 3 | ||||
| VCC to RESET Delay | 20 | μs | VTH − VCC = 100 mV | 3 | |||
| RESET Timeout Period | 140 | 200 | 280 | ms | 3 | ||
| RESET Output Voltage VOL (Push-Pull or Open-Drain) | VOL | 0.3 | V | VCC >= 1 V, ISINK = 50 μA | 3 | ||
| RESET Output Voltage VOL (Push-Pull or Open-Drain) | VOL | 0.4 | V | VCC >= 4.25 V, ISINK = 3.2 mA | 3 | ||
| RESET Output Voltage VOL (Push-Pull Only) | VOL | 0.3 | V | VCC >= 1.8 V, ISINK = 500 μA | 3 | ||
| RESET Output Voltage VOL (Push-Pull Only) | VOL | 0.4 | V | VCC >= 4.75 V, ISINK = 3.2 mA | 3 | ||
| MR Input Pulse Width | 1 | μs | 3 | ||||
| MR Glitch Rejection | 100 | ns | 3 | ||||
| MR to Reset Delay | 200 | ns | 3 | ||||
| MR Pull-Up Resistance | 25 | 50 | 75 | kΩ | 3 | ||
| Watchdog Timeout Period | 1.12 | 1.6 | 2.4 | sec | 4 | ||
| WDI Pulse Width | 50 | ns | 4 | ||||
| WDI Input Current | 120 | 160 | μA | VWDI = VCC | 4 | ||
| WDI Input Current | -20 | -15 | μA | VWDI = 0 | 4 | ||
| VCC Supply Voltage (ADM682_T/S/R test range) | VCC | 2.7 | 3.6 | V | ADM682_T/S/R | 3 | |
| VCC (supply voltage, with respect to GND) | VCC | -0.3 | 6 | V | 5 | ||
| Output Current (RESET, RESET) | 20 | mA | 5 | ||||
| Operating Temperature Range | -40 | 125 | °C | 5 | |||
| Storage Temperature Range | -65 | 150 | °C | 5 | |||
| Soldering Temperature (Sn/Pb) | 240 | °C | Sn/Pb, 30 sec | 5 | |||
| Soldering Temperature (Pb-Free) | 260 | °C | Pb-free, 40 sec | 5 | |||
| θJA Thermal Impedance | θJA | 170 | °C/W | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
ADM6823TYRJZ-RL7 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
adm6823tyrjz-etched.step/adm6823tyrjz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adm6823tyrjz.step/adm6823tyrjz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (12 pp, sha256
ae605624fcf39cd7, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).