main
Ray Publish 0.1.0 394310a
{
  "slug": "adm6321ay31arjz-r7",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Monitors & Reset Circuits, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "adm6321ay31arjz-r7",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "adm6321ay31arjz-r7.kicad_sym",
    "adm6321ay31arjz-r7.kicad_mod",
    "adm6321ay31arjz-r7.glb",
    "adm6321ay31arjz-r7.step",
    "adm6321ay31arjz-r7.lbr",
    "docs/hero.png",
    "docs/adm6321ay31arjz-r7-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "adm6321ay31arjz-r7-hero.glb",
    "adm6321ay31arjz-r7-hero.overlay.json"
  ],
  "component": {
    "mpn": "ADM6321AY31ARJZ-R7",
    "manufacturer": "Analog Devices",
    "package": "SOT-23-5",
    "pin_count": 5,
    "category": "Power Supply Chip",
    "subcategory": "Monitors & Reset Circuits",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADM6316_6317_6318_6319_6320_6321_6322.pdf",
    "parts": {
      "symbol": "adm6321ay31arjz-r7.kicad_sym",
      "footprint": "adm6321ay31arjz-r7.kicad_mod",
      "model_3d": "adm6321ay31arjz-r7-hero.glb",
      "model_3d_plain": "adm6321ay31arjz-r7.glb",
      "model_3d_step": "adm6321ay31arjz-r7-etched.step",
      "model_3d_step_plain": "adm6321ay31arjz-r7.step",
      "lbr": "adm6321ay31arjz-r7.lbr"
    },
    "distributor_links": {
      "lcsc": "C658320",
      "digikey": "505-ADM6321AY31ARJZ-R7TR-ND",
      "mouser": "584-AM6321AY31ARJZR7"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T03:20:06Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-ADM6321AY31ARJZ-R7TR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-AM6321AY31ARJZR7",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "RESET",
        "type": "output",
        "description": "Active low, open-drain reset output that is asserted whenever VCC is below the reset threshold VTH and needs an external pull-up to a rail no higher than 6 V (a 10 kΩ pull-up is adequate in most situations)."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "3",
        "name": "RESET",
        "type": "output",
        "description": "Active high, push-pull reset output that is the complement of the active low RESET output, and is guaranteed valid for VCC down to 1 V."
      },
      {
        "number": "4",
        "name": "WDI",
        "type": "input",
        "description": "Watchdog input that generates a reset if its logic level stays low or high for the full watchdog timeout (1.6 s typical for the AY31 suffix per the ordering guide); any logic transition on the pin clears the timer, and leaving it floating disables the watchdog."
      },
      {
        "number": "5",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply voltage being monitored, with an operating voltage range of 1 V to 5.5 V and an absolute maximum of −0.3 V to +6 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Text extraction dropped the overbar on the RESET names, so both outputs read as 'RESET'. Pin 1 is th; Pin 1 is an open-drain output, which KiCad ERC does not list as a separate class in this schema, so ; The datasheet's watchdog timeout values are for the whole family. The 1.6 s typical value for the AY"
        ],
        "pages_sent": 14,
        "cost_usd": 0.0048,
        "at": "2026-11-13T03:19:54"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADM6316_6317_6318_6319_6320_6321_6322.pdf",
        "pages": 14,
        "sha256": "dd088bd72e7c3937",
        "source_tier": "mfr"
      },
      "cad": "land: KiCad official (CC-BY-SA 4.0); 3D: generated from the datasheet",
      "model_3d_generated": {
        "generator": "factory/gen_pkg3d.py",
        "family": "SOT",
        "height_mm": 1.45,
        "height_basis": "datasheet A, max",
        "standoff_mm": 0.05,
        "standoff_basis": "family nominal (no datasheet A1 read)",
        "lead_width_mm": 0.36,
        "lead_width_basis": "default: 0.6 x pad width across the lead, at most 0.45 x pitch 0.95 mm; a tab 0.9 x its width (no datasheet b read)",
        "lead_thickness_mm": 0.172,
        "lead_thickness_basis": "default for pitch 0.95 mm, height 1.45 mm (no datasheet c read)"
      },
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "adm6321ay31arjz-r7.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.45
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f81f75978e1efd5cca999e4f91df29142f53faaffdecc9c33f7622d0630b6032",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "adm6321ay31arjz-r7-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.45
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e4c14223eb716a717bb95b59640e5c3c8df2f24d29300829fef8b9250650ced4",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "RJ-5",
      "source_page": 13,
      "D": {
        "nom_mm": 2.9,
        "range_mm": [
          2.8,
          3.0
        ]
      },
      "E1": {
        "nom_mm": 1.6,
        "range_mm": [
          1.5,
          1.7
        ]
      },
      "E": {
        "nom_mm": 2.8,
        "range_mm": [
          2.6,
          3.0
        ]
      },
      "e": {
        "nom_mm": 0.95,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.45,
        "range_mm": [
          null,
          1.45
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "adm6321ay31arjz-r7.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}