3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownADM6321AY31ARJZ-R7
Analog Devices · Monitors & Reset Circuits · SOT-23-5
ADM6321AY31ARJZ-R7 from Analog Devices, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET | output | Active low, open-drain reset output that is asserted whenever VCC is below the reset threshold VTH and needs an external pull-up to a rail no higher than 6 V (a 10 kΩ pull-up is adequate in most situations). |
| 2 | GND | power_in | Ground reference for the device. |
| 3 | RESET | output | Active high, push-pull reset output that is the complement of the active low RESET output, and is guaranteed valid for VCC down to 1 V. |
| 4 | WDI | input | Watchdog input that generates a reset if its logic level stays low or high for the full watchdog timeout (1.6 s typical for the AY31 suffix per the ordering guide); any logic transition on the pin clears the timer, and leaving it floating disables the watchdog. |
| 5 | VCC | power_in | Power supply voltage being monitored, with an operating voltage range of 1 V to 5.5 V and an absolute maximum of −0.3 V to +6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Operating Voltage Range | VCC | 1 | 5.5 | V | VCC full operating range | 3 | |
| Supply Current | 10 | 20 | µA | VCC = 5.5 V | 3 | ||
| Supply Current | 5 | 12 | µA | VCC = 3.6 V | 3 | ||
| RESET threshold voltage tolerance | VTH | -1.5 | 1.5 | % | TA = 25°C | 3 | |
| RESET threshold voltage tolerance | VTH | -2.5 | 2.5 | % | TA = −40°C to +85°C | 3 | |
| RESET threshold voltage, option 31 (3.08 V) | VTH | 3.034 | 3.08 | 3.126 | V | Threshold number 31, TA = +25°C | 11 |
| RESET threshold voltage, option 31 (3.08 V) | VTH | 3.003 | 3.157 | V | Threshold number 31, TA = −40°C to +85°C | 11 | |
| RESET timeout period (suffix A) | 1 | 1.4 | 2 | ms | ADM63xxA reset timeout option | 3 | |
| Watchdog timeout period (suffix Y) | 1.12 | 1.6 | 2.4 | sec | ADM63xxxY watchdog option | 3 | |
| WDI pulse width | 50 | ns | VIL = 0.3 × VCC, VIH = 0.7 × VCC | 3 | |||
| WDI input threshold | 0.3 | 0.7 | ×VCC | 3 | |||
| WDI input current | 120 | 160 | µA | VWDI = VCC, time average | 3 | ||
| WDI input current | -20 | -15 | µA | VWDI = 0, time average | 3 | ||
| RESET output voltage (push-pull, active high) | 0.3 | V | VCC ≥ 2.7 V, ISINK = 1.2 mA | 3 | |||
| RESET output voltage (push-pull, active high) | 0.4 | V | VCC ≥ 4.5 V, ISINK = 3.2 mA | 3 | |||
| RESET output voltage (push-pull, active high) | 0.8 | ×VCC | VCC ≥ 1.8 V, ISOURCE = 150 µA | 3 | |||
| RESET output voltage (open-drain, active low) | 0.3 | V | VCC ≥ 1.0 V, ISINK = 50 µA | 3 | |||
| RESET output voltage (open-drain, active low) | 0.4 | V | VCC ≥ 4.5 V, ISINK = 3.2 mA | 3 | |||
| Open-drain reset output leakage current | 1 | µA | 3 | ||||
| RESET rise time (push-pull) | 5 | 25 | ns | 10% to 90% VCC, CL = 5 pF, VCC = 3.3 V | 3 | ||
| Reset threshold temperature coefficient | 40 | ppm/°C | 3 | ||||
| Reset threshold hysteresis | 3 | mV | 3 | ||||
| VCC to RESET delay | 40 | µs | VCC falling at 1 mV/µs | 3 | |||
| VCC pin voltage (absolute maximum) | VCC | -0.3 | 6 | V | 5 | ||
| RESET voltage (open-drain device, ADM6321 pin 1) | RESET | -0.3 | 6 | V | ADM6320/ADM6321/ADM6322 | 5 | |
| All other pins voltage (absolute maximum) | -0.3 | V | Maximum is VCC + 0.3 V | 5 | |||
| Output current (RESET, RESET) | 20 | mA | 5 | ||||
| Operating temperature range | -40 | 85 | °C | 5 | |||
| Storage temperature range | -65 | 125 | °C | 5 | |||
| θJA thermal impedance, SOT-23 | θJA | 270 | °C/W | SOT-23 package | 5 | ||
| Lead temperature, soldering | 300 | °C | 10 s | 5 | |||
| Lead temperature, vapor phase | 215 | °C | 60 s | 5 | |||
| Lead temperature, infrared | 220 | °C | 15 s | 5 | |||
| External pull-up rail for open-drain RESET | 6 | V | Pull-up to a voltage rail no higher than 6 V | 9 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
ADM6321AY31ARJZ-R7 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
adm6321ay31arjz-r7-etched.step/adm6321ay31arjz-r7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adm6321ay31arjz-r7.step/adm6321ay31arjz-r7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (14 pp, sha256
dd088bd72e7c3937, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).