main
Ray Publish 0.1.0 394310a

ADM6321AY31ARJZ-R7

Analog Devices · Monitors & Reset Circuits · SOT-23-5

ADM6321AY31ARJZ-R7 from Analog Devices, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 RESET output Active low, open-drain reset output that is asserted whenever VCC is below the reset threshold VTH and needs an external pull-up to a rail no higher than 6 V (a 10 kΩ pull-up is adequate in most situations).
2 GND power_in Ground reference for the device.
3 RESET output Active high, push-pull reset output that is the complement of the active low RESET output, and is guaranteed valid for VCC down to 1 V.
4 WDI input Watchdog input that generates a reset if its logic level stays low or high for the full watchdog timeout (1.6 s typical for the AY31 suffix per the ordering guide); any logic transition on the pin clears the timer, and leaving it floating disables the watchdog.
5 VCC power_in Power supply voltage being monitored, with an operating voltage range of 1 V to 5.5 V and an absolute maximum of −0.3 V to +6 V.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC Operating Voltage Range VCC 1 5.5 V VCC full operating range 3
Supply Current 10 20 µA VCC = 5.5 V 3
Supply Current 5 12 µA VCC = 3.6 V 3
RESET threshold voltage tolerance VTH -1.5 1.5 % TA = 25°C 3
RESET threshold voltage tolerance VTH -2.5 2.5 % TA = −40°C to +85°C 3
RESET threshold voltage, option 31 (3.08 V) VTH 3.034 3.08 3.126 V Threshold number 31, TA = +25°C 11
RESET threshold voltage, option 31 (3.08 V) VTH 3.003 3.157 V Threshold number 31, TA = −40°C to +85°C 11
RESET timeout period (suffix A) 1 1.4 2 ms ADM63xxA reset timeout option 3
Watchdog timeout period (suffix Y) 1.12 1.6 2.4 sec ADM63xxxY watchdog option 3
WDI pulse width 50 ns VIL = 0.3 × VCC, VIH = 0.7 × VCC 3
WDI input threshold 0.3 0.7 ×VCC 3
WDI input current 120 160 µA VWDI = VCC, time average 3
WDI input current -20 -15 µA VWDI = 0, time average 3
RESET output voltage (push-pull, active high) 0.3 V VCC ≥ 2.7 V, ISINK = 1.2 mA 3
RESET output voltage (push-pull, active high) 0.4 V VCC ≥ 4.5 V, ISINK = 3.2 mA 3
RESET output voltage (push-pull, active high) 0.8 ×VCC VCC ≥ 1.8 V, ISOURCE = 150 µA 3
RESET output voltage (open-drain, active low) 0.3 V VCC ≥ 1.0 V, ISINK = 50 µA 3
RESET output voltage (open-drain, active low) 0.4 V VCC ≥ 4.5 V, ISINK = 3.2 mA 3
Open-drain reset output leakage current 1 µA 3
RESET rise time (push-pull) 5 25 ns 10% to 90% VCC, CL = 5 pF, VCC = 3.3 V 3
Reset threshold temperature coefficient 40 ppm/°C 3
Reset threshold hysteresis 3 mV 3
VCC to RESET delay 40 µs VCC falling at 1 mV/µs 3
VCC pin voltage (absolute maximum) VCC -0.3 6 V 5
RESET voltage (open-drain device, ADM6321 pin 1) RESET -0.3 6 V ADM6320/ADM6321/ADM6322 5
All other pins voltage (absolute maximum) -0.3 V Maximum is VCC + 0.3 V 5
Output current (RESET, RESET) 20 mA 5
Operating temperature range -40 85 °C 5
Storage temperature range -65 125 °C 5
θJA thermal impedance, SOT-23 θJA 270 °C/W SOT-23 package 5
Lead temperature, soldering 300 °C 10 s 5
Lead temperature, vapor phase 215 °C 60 s 5
Lead temperature, infrared 220 °C 15 s 5
External pull-up rail for open-drain RESET 6 V Pull-up to a voltage rail no higher than 6 V 9

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: ADM6321AY31ARJZ-R7
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: adm6321ay31arjz-r7-etched.step / adm6321ay31arjz-r7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adm6321ay31arjz-r7.step / adm6321ay31arjz-r7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (14 pp, sha256 dd088bd72e7c3937, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF