main
Ray
Publish 0.1.0
93b59f0
ADM6320CZ29ARJZ-R7
Analog Devices · Monitors & Reset Circuits · SOT-23-5
ADM6320CZ29ARJZ-R7 from Analog Devices, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET | output | Active low open-drain reset output (ADM6320 output stage) asserted whenever VCC is below the reset threshold VTH, so it requires an external pull-up resistor. |
| 2 | GND | power_in | Ground reference for all models. |
| 3 | MR | input | Active low manual reset input that generates a reset when forced low for at least 1 µs and includes a 52 kΩ internal pull-up. |
| 4 | WDI | input | Watchdog input that generates a reset if its logic level stays low or high for the full watchdog timeout, and leaving the pin floating disables the watchdog timer. |
| 5 | VCC | power_in | Power supply voltage being monitored by the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23-5 |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Operating Voltage Range | 1 | 5.5 | V | 3 | |||
| Supply Current | 10 | 20 | µA | VCC = 5.5 V | 3 | ||
| Supply Current | 5 | 12 | µA | VCC = 3.6 V | 3 | ||
| Reset threshold voltage tolerance | VTH | -1.5 | 1.5 | % | TA = 25°C | 3 | |
| Reset threshold voltage tolerance | VTH | -2.5 | 2.5 | % | TA = −40°C to +85°C | 3 | |
| Reset threshold voltage, 2.93 V option (suffix 29) | VTH | 2.886 | 2.93 | 2.974 | V | TA = +25°C (Table 5, threshold number 29) | 11 |
| Reset threshold voltage, 2.93 V option (suffix 29) | VTH | 2.857 | 3 | V | TA = −40°C to +85°C (Table 5, threshold number 29) | 11 | |
| Reset threshold temperature coefficient | 40 | ppm/°C | 3 | ||||
| Reset timeout period (suffix C) | 140 | 200 | 280 | ms | ADM63xxC | 3 | |
| Watchdog timeout period (suffix Z) | 17.9 | 25.6 | 38.4 | sec | ADM63xxxZ | 3 | |
| RESET output voltage (open-drain) | 0.3 | V | VCC ≥ 1.0 V, ISINK = 50 µA | 3 | |||
| RESET output voltage (open-drain) | 0.4 | V | VCC ≥ 4.5 V, ISINK = 3.2 mA | 3 | |||
| Open-drain reset output leakage current | 1 | µA | 3 | ||||
| WDI pulse width | 50 | ns | VIL = 0.3 × VCC, VIH = 0.7 × VCC | 3 | |||
| WDI input current (high) | 120 | 160 | µA | VWDI = VCC, time average | 3 | ||
| WDI input current (low) | -20 | -15 | µA | VWDI = 0, time average | 3 | ||
| MR input threshold | 0.8 | 2 | V | VTH > 4.0 V | 4 | ||
| MR input pulse width | 1 | µs | 4 | ||||
| MR glitch rejection | 100 | ns | 4 | ||||
| MR pull-up resistance | 35 | 52 | 75 | kΩ | 4 | ||
| MR to reset delay | 230 | ns | VCC = 5 V | 4 | |||
| VCC | VCC | -0.3 | 6 | V | 5 | ||
| RESET (ADM6320, ADM6321, ADM6322) | RESET | -0.3 | 6 | V | 5 | ||
| Output current (RESET, RESET) | 20 | mA | 5 | ||||
| Operating temperature range | TA | -40 | 85 | °C | 5 | ||
| Storage temperature range | -65 | 125 | °C | 5 | |||
| Lead temperature, soldering | 300 | °C | 10 sec | 5 | |||
| Lead temperature, vapor phase | 215 | °C | 60 sec | 5 | |||
| Lead temperature, infrared | 220 | °C | 15 sec | 5 | |||
| Reset threshold hysteresis | 3 | mV | 3 | ||||
| VCC to reset delay | 40 | µs | VCC falling at 1 mV/µs | 3 | |||
| Thermal impedance, θJA (SOT-23) | θJA | 270 | °C/W | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
ADM6320CZ29ARJZ-R7 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.2 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
adm6320cz29arjz-r7-etched.step/adm6320cz29arjz-r7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adm6320cz29arjz-r7.step/adm6320cz29arjz-r7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (14 pp, sha256
dd088bd72e7c3937, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# ADM6320CZ29ARJZ-R7
**Analog Devices** · Monitors & Reset Circuits · SOT-23-5
ADM6320CZ29ARJZ-R7 from Analog Devices, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET | output | Active low open-drain reset output (ADM6320 output stage) asserted whenever VCC is below the reset threshold VTH, so it requires an external pull-up resistor. |
| 2 | GND | power_in | Ground reference for all models. |
| 3 | MR | input | Active low manual reset input that generates a reset when forced low for at least 1 µs and includes a 52 kΩ internal pull-up. |
| 4 | WDI | input | Watchdog input that generates a reset if its logic level stays low or high for the full watchdog timeout, and leaving the pin floating disables the watchdog timer. |
| 5 | VCC | power_in | Power supply voltage being monitored by the device. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23-5 |
| Category | Power Management ICs |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Operating Voltage Range | | 1 | | 5.5 | V | | 3 |
| Supply Current | | | 10 | 20 | µA | VCC = 5.5 V | 3 |
| Supply Current | | | 5 | 12 | µA | VCC = 3.6 V | 3 |
| Reset threshold voltage tolerance | VTH | -1.5 | | 1.5 | % | TA = 25°C | 3 |
| Reset threshold voltage tolerance | VTH | -2.5 | | 2.5 | % | TA = −40°C to +85°C | 3 |
| Reset threshold voltage, 2.93 V option (suffix 29) | VTH | 2.886 | 2.93 | 2.974 | V | TA = +25°C (Table 5, threshold number 29) | 11 |
| Reset threshold voltage, 2.93 V option (suffix 29) | VTH | 2.857 | | 3 | V | TA = −40°C to +85°C (Table 5, threshold number 29) | 11 |
| Reset threshold temperature coefficient | | | | 40 | ppm/°C | | 3 |
| Reset timeout period (suffix C) | | 140 | 200 | 280 | ms | ADM63xxC | 3 |
| Watchdog timeout period (suffix Z) | | 17.9 | 25.6 | 38.4 | sec | ADM63xxxZ | 3 |
| RESET output voltage (open-drain) | | | | 0.3 | V | VCC ≥ 1.0 V, ISINK = 50 µA | 3 |
| RESET output voltage (open-drain) | | | | 0.4 | V | VCC ≥ 4.5 V, ISINK = 3.2 mA | 3 |
| Open-drain reset output leakage current | | | | 1 | µA | | 3 |
| WDI pulse width | | 50 | | | ns | VIL = 0.3 × VCC, VIH = 0.7 × VCC | 3 |
| WDI input current (high) | | | 120 | 160 | µA | VWDI = VCC, time average | 3 |
| WDI input current (low) | | -20 | | -15 | µA | VWDI = 0, time average | 3 |
| MR input threshold | | 0.8 | | 2 | V | VTH > 4.0 V | 4 |
| MR input pulse width | | 1 | | | µs | | 4 |
| MR glitch rejection | | | | 100 | ns | | 4 |
| MR pull-up resistance | | 35 | 52 | 75 | kΩ | | 4 |
| MR to reset delay | | | | 230 | ns | VCC = 5 V | 4 |
| VCC | VCC | -0.3 | | 6 | V | | 5 |
| RESET (ADM6320, ADM6321, ADM6322) | RESET | -0.3 | | 6 | V | | 5 |
| Output current (RESET, RESET) | | | | 20 | mA | | 5 |
| Operating temperature range | TA | -40 | | 85 | °C | | 5 |
| Storage temperature range | | -65 | | 125 | °C | | 5 |
| Lead temperature, soldering | | | | 300 | °C | 10 sec | 5 |
| Lead temperature, vapor phase | | | | 215 | °C | 60 sec | 5 |
| Lead temperature, infrared | | | | 220 | °C | 15 sec | 5 |
| Reset threshold hysteresis | | | 3 | | mV | | 3 |
| VCC to reset delay | | | 40 | | µs | VCC falling at 1 mV/µs | 3 |
| Thermal impedance, θJA (SOT-23) | θJA | | 270 | | °C/W | | 5 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `ADM6320CZ29ARJZ-R7`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.2 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `adm6320cz29arjz-r7-etched.step` / `adm6320cz29arjz-r7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `adm6320cz29arjz-r7.step` / `adm6320cz29arjz-r7.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/ADM6316_6317_6318_6319_6320_6321_6322.pdf) (14 pp, sha256 `dd088bd72e7c3937`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/adm6320cz29arjz-r7-datasheet.pdf)