main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers adm6320cz29arjz-r7: viewers rendered from the public page · Ray
adm6320cz29arjz-r7-etched.glb adm6320cz29arjz-r7: factory component page (tier=mfr) · Ray
adm6320cz29arjz-r7-etched.step adm6320cz29arjz-r7: factory component page (tier=mfr) · Ray
adm6320cz29arjz-r7-hero.glb adm6320cz29arjz-r7: hero GLB from the etched model (keeps the MPN mark) · Ray
adm6320cz29arjz-r7-hero.overlay.json adm6320cz29arjz-r7: hero GLB from the etched model (keeps the MPN mark) · Ray
adm6320cz29arjz-r7.glb Publish 0.1.0 · Ray
adm6320cz29arjz-r7.kicad_mod Publish 0.1.0 · Ray
adm6320cz29arjz-r7.kicad_sym Publish 0.1.0 · Ray
adm6320cz29arjz-r7.lbr Publish 0.1.0 · Ray
adm6320cz29arjz-r7.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 5 pins · Ray

ADM6320CZ29ARJZ-R7

Analog Devices · Monitors & Reset Circuits · SOT-23-5

ADM6320CZ29ARJZ-R7 from Analog Devices, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 RESET output Active low open-drain reset output (ADM6320 output stage) asserted whenever VCC is below the reset threshold VTH, so it requires an external pull-up resistor.
2 GND power_in Ground reference for all models.
3 MR input Active low manual reset input that generates a reset when forced low for at least 1 µs and includes a 52 kΩ internal pull-up.
4 WDI input Watchdog input that generates a reset if its logic level stays low or high for the full watchdog timeout, and leaving the pin floating disables the watchdog timer.
5 VCC power_in Power supply voltage being monitored by the device.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOT-23-5
Category Power Management ICs
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC Operating Voltage Range 1 5.5 V 3
Supply Current 10 20 µA VCC = 5.5 V 3
Supply Current 5 12 µA VCC = 3.6 V 3
Reset threshold voltage tolerance VTH -1.5 1.5 % TA = 25°C 3
Reset threshold voltage tolerance VTH -2.5 2.5 % TA = −40°C to +85°C 3
Reset threshold voltage, 2.93 V option (suffix 29) VTH 2.886 2.93 2.974 V TA = +25°C (Table 5, threshold number 29) 11
Reset threshold voltage, 2.93 V option (suffix 29) VTH 2.857 3 V TA = −40°C to +85°C (Table 5, threshold number 29) 11
Reset threshold temperature coefficient 40 ppm/°C 3
Reset timeout period (suffix C) 140 200 280 ms ADM63xxC 3
Watchdog timeout period (suffix Z) 17.9 25.6 38.4 sec ADM63xxxZ 3
RESET output voltage (open-drain) 0.3 V VCC ≥ 1.0 V, ISINK = 50 µA 3
RESET output voltage (open-drain) 0.4 V VCC ≥ 4.5 V, ISINK = 3.2 mA 3
Open-drain reset output leakage current 1 µA 3
WDI pulse width 50 ns VIL = 0.3 × VCC, VIH = 0.7 × VCC 3
WDI input current (high) 120 160 µA VWDI = VCC, time average 3
WDI input current (low) -20 -15 µA VWDI = 0, time average 3
MR input threshold 0.8 2 V VTH > 4.0 V 4
MR input pulse width 1 µs 4
MR glitch rejection 100 ns 4
MR pull-up resistance 35 52 75 kΩ 4
MR to reset delay 230 ns VCC = 5 V 4
VCC VCC -0.3 6 V 5
RESET (ADM6320, ADM6321, ADM6322) RESET -0.3 6 V 5
Output current (RESET, RESET) 20 mA 5
Operating temperature range TA -40 85 °C 5
Storage temperature range -65 125 °C 5
Lead temperature, soldering 300 °C 10 sec 5
Lead temperature, vapor phase 215 °C 60 sec 5
Lead temperature, infrared 220 °C 15 sec 5
Reset threshold hysteresis 3 mV 3
VCC to reset delay 40 µs VCC falling at 1 mV/µs 3
Thermal impedance, θJA (SOT-23) θJA 270 °C/W 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: ADM6320CZ29ARJZ-R7
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.2 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: adm6320cz29arjz-r7-etched.step / adm6320cz29arjz-r7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adm6320cz29arjz-r7.step / adm6320cz29arjz-r7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (14 pp, sha256 dd088bd72e7c3937, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF