main
Ray
Publish 0.1.0
ae5f4b9
ADM6318CY46ARJZ-R7
Analog Devices · Monitors & Reset Circuits · SOT-23-5
ADM6318CY46ARJZ-R7 from Analog Devices, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ~{RESET} | output | Active-low push-pull reset output, asserted whenever VCC is below the reset threshold VTH (also on watchdog timeout), guaranteed valid down to VCC = 1 V. |
| 2 | GND | power_in | Ground. |
| 3 | RESET | output | Active-high push-pull reset output, guaranteed logic high for VCC down to 1 V. |
| 4 | WDI | input | Watchdog input that generates a reset if the logic level stays low or high for the watchdog timeout (1.6 s typ for this Y option); the timer is cleared by a logic transition or a reset, and leaving the pin floating disables the watchdog. |
| 5 | VCC | power_in | Power supply voltage being monitored, operating range 1 V to 5.5 V (absolute maximum -0.3 V to +6 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Operating Voltage Range | VCC | 1 | 5.5 | V | 3 | ||
| Supply Current | ICC | 10 | 20 | µA | VCC = 5.5 V | 3 | |
| Supply Current | ICC | 5 | 12 | µA | VCC = 3.6 V | 3 | |
| Reset Threshold Voltage (threshold 46) | VTH | 4.561 | 4.63 | 4.699 | V | TA = 25°C | 11 |
| Reset Threshold Voltage (threshold 46) | VTH | 4.514 | 4.63 | 4.746 | V | TA = −40°C to +85°C | 11 |
| Reset Threshold Temperature Coefficient | 40 | ppm/°C | 3 | ||||
| Reset Threshold Hysteresis | 3 | mV | 3 | ||||
| Reset Timeout Period (ADM63xxC) | tRP | 140 | 200 | 280 | ms | ADM63xxC | 3 |
| VCC to Reset Delay | tRD | 40 | µs | VCC falling at 1 mV/µs | 3 | ||
| RESET Output Voltage Low | VOL | 0.3 | V | VCC ≥ 1.0 V, ISINK = 50 µA | 3 | ||
| RESET Output Voltage Low | VOL | 0.4 | V | VCC ≥ 4.5 V, ISINK = 3.2 mA | 3 | ||
| RESET Output Voltage High | VOH | 0.8 | × VCC | VCC ≥ 2.7 V, ISOURCE = 500 µA | 3 | ||
| RESET Rise Time | 5 | 25 | ns | From 10% to 90% VCC, CL = 5 pF, VCC = 3.3 V | 3 | ||
| Watchdog Timeout Period (ADM63xxxY) | tWD | 1.12 | 1.6 | 2.4 | sec | ADM63xxxY | 3 |
| WDI Pulse Width | 50 | ns | VIL = 0.3 × VCC, VIH = 0.7 × VCC | 3 | |||
| WDI Input Current | 120 | 160 | µA | VWDI = VCC, time average | 3 | ||
| WDI Input Current | -20 | -15 | µA | VWDI = 0, time average | 3 | ||
| MR Input Threshold Low | 0.8 | V | VTH > 4.0 V | 4 | |||
| MR Input Threshold High | 2 | V | VTH > 4.0 V | 4 | |||
| MR Input Pulse Width | 1 | µs | 4 | ||||
| MR Glitch Rejection | 100 | ns | 4 | ||||
| MR Pull-Up Resistance | 35 | 52 | 75 | kΩ | 4 | ||
| MR to Reset Delay | 230 | ns | VCC = 5 V | 4 | |||
| VCC | VCC | -0.3 | 6 | V | TA = 25°C | 5 | |
| All Other Pins | -0.3 | V | to (VCC + 0.3 V) | 5 | |||
| Output Current (RESET, RESET) | 20 | mA | 5 | ||||
| Operating Temperature Range | -40 | 85 | °C | 5 | |||
| Storage Temperature Range | -65 | 125 | °C | 5 | |||
| Lead Temperature, Soldering (10 sec) | 300 | °C | 5 | ||||
| Lead Temperature, Vapor Phase (60 sec) | 215 | °C | 5 | ||||
| Lead Temperature, Infrared (15 sec) | 220 | °C | 5 | ||||
| θJA Thermal Impedance, SOT-23 | θJA | 270 | °C/W | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
ADM6318CY46ARJZ-R7 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
adm6318cy46arjz-r7-etched.step/adm6318cy46arjz-r7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adm6318cy46arjz-r7.step/adm6318cy46arjz-r7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (14 pp, sha256
dd088bd72e7c3937, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# ADM6318CY46ARJZ-R7
**Analog Devices** · Monitors & Reset Circuits · SOT-23-5
ADM6318CY46ARJZ-R7 from Analog Devices, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ~{RESET} | output | Active-low push-pull reset output, asserted whenever VCC is below the reset threshold VTH (also on watchdog timeout), guaranteed valid down to VCC = 1 V. |
| 2 | GND | power_in | Ground. |
| 3 | RESET | output | Active-high push-pull reset output, guaranteed logic high for VCC down to 1 V. |
| 4 | WDI | input | Watchdog input that generates a reset if the logic level stays low or high for the watchdog timeout (1.6 s typ for this Y option); the timer is cleared by a logic transition or a reset, and leaving the pin floating disables the watchdog. |
| 5 | VCC | power_in | Power supply voltage being monitored, operating range 1 V to 5.5 V (absolute maximum -0.3 V to +6 V). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Operating Voltage Range | VCC | 1 | | 5.5 | V | | 3 |
| Supply Current | ICC | | 10 | 20 | µA | VCC = 5.5 V | 3 |
| Supply Current | ICC | | 5 | 12 | µA | VCC = 3.6 V | 3 |
| Reset Threshold Voltage (threshold 46) | VTH | 4.561 | 4.63 | 4.699 | V | TA = 25°C | 11 |
| Reset Threshold Voltage (threshold 46) | VTH | 4.514 | 4.63 | 4.746 | V | TA = −40°C to +85°C | 11 |
| Reset Threshold Temperature Coefficient | | | 40 | | ppm/°C | | 3 |
| Reset Threshold Hysteresis | | | 3 | | mV | | 3 |
| Reset Timeout Period (ADM63xxC) | tRP | 140 | 200 | 280 | ms | ADM63xxC | 3 |
| VCC to Reset Delay | tRD | | 40 | | µs | VCC falling at 1 mV/µs | 3 |
| RESET Output Voltage Low | VOL | | | 0.3 | V | VCC ≥ 1.0 V, ISINK = 50 µA | 3 |
| RESET Output Voltage Low | VOL | | | 0.4 | V | VCC ≥ 4.5 V, ISINK = 3.2 mA | 3 |
| RESET Output Voltage High | VOH | 0.8 | | | × VCC | VCC ≥ 2.7 V, ISOURCE = 500 µA | 3 |
| RESET Rise Time | | | 5 | 25 | ns | From 10% to 90% VCC, CL = 5 pF, VCC = 3.3 V | 3 |
| Watchdog Timeout Period (ADM63xxxY) | tWD | 1.12 | 1.6 | 2.4 | sec | ADM63xxxY | 3 |
| WDI Pulse Width | | 50 | | | ns | VIL = 0.3 × VCC, VIH = 0.7 × VCC | 3 |
| WDI Input Current | | | 120 | 160 | µA | VWDI = VCC, time average | 3 |
| WDI Input Current | | -20 | -15 | | µA | VWDI = 0, time average | 3 |
| MR Input Threshold Low | | | | 0.8 | V | VTH > 4.0 V | 4 |
| MR Input Threshold High | | 2 | | | V | VTH > 4.0 V | 4 |
| MR Input Pulse Width | | 1 | | | µs | | 4 |
| MR Glitch Rejection | | | 100 | | ns | | 4 |
| MR Pull-Up Resistance | | 35 | 52 | 75 | kΩ | | 4 |
| MR to Reset Delay | | | 230 | | ns | VCC = 5 V | 4 |
| VCC | VCC | -0.3 | | 6 | V | TA = 25°C | 5 |
| All Other Pins | | -0.3 | | | V | to (VCC + 0.3 V) | 5 |
| Output Current (RESET, RESET) | | | | 20 | mA | | 5 |
| Operating Temperature Range | | -40 | | 85 | °C | | 5 |
| Storage Temperature Range | | -65 | | 125 | °C | | 5 |
| Lead Temperature, Soldering (10 sec) | | | | 300 | °C | | 5 |
| Lead Temperature, Vapor Phase (60 sec) | | | | 215 | °C | | 5 |
| Lead Temperature, Infrared (15 sec) | | | | 220 | °C | | 5 |
| θJA Thermal Impedance, SOT-23 | θJA | | 270 | | °C/W | | 5 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `ADM6318CY46ARJZ-R7`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `adm6318cy46arjz-r7-etched.step` / `adm6318cy46arjz-r7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `adm6318cy46arjz-r7.step` / `adm6318cy46arjz-r7.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/ADM6316_6317_6318_6319_6320_6321_6322.pdf) (14 pp, sha256 `dd088bd72e7c3937`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/adm6318cy46arjz-r7-datasheet.pdf)