Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ADM6318CY46ARJZ-R7

Analog Devices · Monitors & Reset Circuits · SOT-23-5

ADM6318CY46ARJZ-R7 from Analog Devices, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 ~{RESET} output Active-low push-pull reset output, asserted whenever VCC is below the reset threshold VTH (also on watchdog timeout), guaranteed valid down to VCC = 1 V.
2 GND power_in Ground.
3 RESET output Active-high push-pull reset output, guaranteed logic high for VCC down to 1 V.
4 WDI input Watchdog input that generates a reset if the logic level stays low or high for the watchdog timeout (1.6 s typ for this Y option); the timer is cleared by a logic transition or a reset, and leaving the pin floating disables the watchdog.
5 VCC power_in Power supply voltage being monitored, operating range 1 V to 5.5 V (absolute maximum -0.3 V to +6 V).

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC Operating Voltage Range VCC 1 5.5 V 3
Supply Current ICC 10 20 µA VCC = 5.5 V 3
Supply Current ICC 5 12 µA VCC = 3.6 V 3
Reset Threshold Voltage (threshold 46) VTH 4.561 4.63 4.699 V TA = 25°C 11
Reset Threshold Voltage (threshold 46) VTH 4.514 4.63 4.746 V TA = −40°C to +85°C 11
Reset Threshold Temperature Coefficient 40 ppm/°C 3
Reset Threshold Hysteresis 3 mV 3
Reset Timeout Period (ADM63xxC) tRP 140 200 280 ms ADM63xxC 3
VCC to Reset Delay tRD 40 µs VCC falling at 1 mV/µs 3
RESET Output Voltage Low VOL 0.3 V VCC ≥ 1.0 V, ISINK = 50 µA 3
RESET Output Voltage Low VOL 0.4 V VCC ≥ 4.5 V, ISINK = 3.2 mA 3
RESET Output Voltage High VOH 0.8 × VCC VCC ≥ 2.7 V, ISOURCE = 500 µA 3
RESET Rise Time 5 25 ns From 10% to 90% VCC, CL = 5 pF, VCC = 3.3 V 3
Watchdog Timeout Period (ADM63xxxY) tWD 1.12 1.6 2.4 sec ADM63xxxY 3
WDI Pulse Width 50 ns VIL = 0.3 × VCC, VIH = 0.7 × VCC 3
WDI Input Current 120 160 µA VWDI = VCC, time average 3
WDI Input Current -20 -15 µA VWDI = 0, time average 3
MR Input Threshold Low 0.8 V VTH > 4.0 V 4
MR Input Threshold High 2 V VTH > 4.0 V 4
MR Input Pulse Width 1 µs 4
MR Glitch Rejection 100 ns 4
MR Pull-Up Resistance 35 52 75 kΩ 4
MR to Reset Delay 230 ns VCC = 5 V 4
VCC VCC -0.3 6 V TA = 25°C 5
All Other Pins -0.3 V to (VCC + 0.3 V) 5
Output Current (RESET, RESET) 20 mA 5
Operating Temperature Range -40 85 °C 5
Storage Temperature Range -65 125 °C 5
Lead Temperature, Soldering (10 sec) 300 °C 5
Lead Temperature, Vapor Phase (60 sec) 215 °C 5
Lead Temperature, Infrared (15 sec) 220 °C 5
θJA Thermal Impedance, SOT-23 θJA 270 °C/W 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: ADM6318CY46ARJZ-R7
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: adm6318cy46arjz-r7-etched.step / adm6318cy46arjz-r7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adm6318cy46arjz-r7.step / adm6318cy46arjz-r7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (14 pp, sha256 dd088bd72e7c3937, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF