ADM3068EBRZ

{
  "slug": "adm3068ebrz",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices RS-485/RS-422 ICs, SOIC-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "communication interface chip-uart-485-232",
    "adm3068ebrz",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "adm3068ebrz.kicad_sym",
    "adm3068ebrz.kicad_mod",
    "adm3068ebrz.glb",
    "adm3068ebrz.step",
    "adm3068ebrz.lbr",
    "docs/hero.png",
    "docs/adm3068ebrz-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "adm3068ebrz-hero.glb",
    "adm3068ebrz-hero.overlay.json",
    "adm3068ebrz-etched.glb"
  ],
  "component": {
    "mpn": "ADM3068EBRZ",
    "manufacturer": "Analog Devices",
    "package": "SOIC-14",
    "pin_count": 14,
    "category": "Communication Interface Chip/UART/485/232",
    "subcategory": "RS-485/RS-422 ICs",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/adm3061e-3062e-3063e-3064e-3065e-3066e-3067e-3068e.pdf",
    "parts": {
      "symbol": "adm3068ebrz.kicad_sym",
      "footprint": "adm3068ebrz.kicad_mod",
      "model_3d": "adm3068ebrz-hero.glb",
      "model_3d_plain": "adm3068ebrz-etched.glb",
      "model_3d_step": "adm3068ebrz-etched.step",
      "model_3d_step_plain": "adm3068ebrz.step",
      "lbr": "adm3068ebrz.lbr"
    },
    "distributor_links": {
      "lcsc": "C658163",
      "digikey": "505-ADM3068EBRZ-ND",
      "mouser": "584-ADM3068EBRZ"
    },
    "distributor_check": {
      "checked_at": "2026-10-31T18:41:40Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-ADM3068EBRZ-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-ADM3068EBRZ",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VIO",
        "type": "power_in",
        "description": "1.62 V to 5.5 V logic supply; a 0.1 µF decoupling capacitor to GND is recommended."
      },
      {
        "number": "2",
        "name": "RO",
        "type": "output",
        "description": "Receiver output data, high when (A − B) ≥ −30 mV and low when (A − B) ≤ −200 mV, tristated when RE is driven high."
      },
      {
        "number": "3",
        "name": "DE",
        "type": "input",
        "description": "Driver enable; a high level enables driver outputs Y and Z and a low level places them in high impedance."
      },
      {
        "number": "4",
        "name": "RE",
        "type": "input",
        "description": "Active-low receiver enable; driving low enables the receiver and driving high disables it."
      },
      {
        "number": "5",
        "name": "DI",
        "type": "input",
        "description": "Transmit data input; data to be transmitted by the driver is applied to this input."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "7",
        "name": "NIC",
        "type": "unconnected",
        "description": "No internal connection; this pin is not internally connected."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "9",
        "name": "Y",
        "type": "output",
        "description": "Driver noninverting output, put into high impedance when the driver is disabled or VCC is powered down."
      },
      {
        "number": "10",
        "name": "Z",
        "type": "output",
        "description": "Driver inverting output, put into high impedance when the driver is disabled or VCC is powered down."
      },
      {
        "number": "11",
        "name": "B",
        "type": "input",
        "description": "Inverting receiver input."
      },
      {
        "number": "12",
        "name": "A",
        "type": "input",
        "description": "Noninverting receiver input."
      },
      {
        "number": "13",
        "name": "NIC",
        "type": "unconnected",
        "description": "No internal connection; this pin is not internally connected."
      },
      {
        "number": "14",
        "name": "VCC",
        "type": "power_in",
        "description": "3.0 V to 5.5 V power supply; a 0.1 µF decoupling capacitor to GND is recommended."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pins 6 and 8 are both listed as GND and pins 7 and 13 as NIC in Table 11. Bus pins Y, Z, A and B are"
        ],
        "pages_sent": 13,
        "cost_usd": 0.1201,
        "at": "2026-10-31T18:41:24"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/adm3061e-3062e-3063e-3064e-3065e-3066e-3067e-3068e.pdf",
        "pages": 25,
        "sha256": "7ce4130f0f613a46",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "adm3068ebrz.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          8.7,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "adm3068ebrz-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          8.7,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "55c01c55f857488f9be9ba4b38a24b64fe4120497782d8dc915e96943e3bc053",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}