main
Ray
Publish 0.1.0
1809544
ADM2682EBRIZ-RL7
Analog Devices · RS-485 & RS-422 · SOIC-16-300mil
ADM2682EBRIZ-RL7 from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND1 | power_in | Ground, logic side. |
| 2 | VCC | power_in | Logic side power supply (3.0 V to 5.5 V); a 0.1 µF and a 0.01 µF decoupling capacitor are recommended between Pin 2 and Pin 1. |
| 3 | RxD | output | Receiver output data, high when (A − B) ≥ −30 mV and low when (A − B) ≤ −200 mV, tristated when RE is driven high. |
| 4 | RE | input | Active-low receiver enable input; driving low enables the receiver and driving high disables it. |
| 5 | DE | input | Driver enable input; driving high enables the driver and driving low disables it. |
| 6 | TxD | input | Driver input; data to be transmitted by the driver is applied to this input. |
| 7 | VCC | power_in | Logic side power supply (3.0 V to 5.5 V); a 0.1 µF and a 10 µF decoupling capacitor are recommended between Pin 7 and Pin 8. |
| 8 | GND1 | power_in | Ground, logic side. |
| 9 | GND2 | power_in | Ground, bus side. |
| 10 | VISOOUT | power_out | Isolated power supply output (3.3 V) that must be connected externally to VISOIN, with a 10 µF reservoir capacitor and 0.1 µF decoupling capacitor recommended between Pin 10 and Pin 9. |
| 11 | Y | output | Driver noninverting output, ±15 kV HBM ESD protected. |
| 12 | Z | output | Driver inverting output, ±15 kV HBM ESD protected. |
| 13 | B | input | Receiver inverting input, ±15 kV HBM ESD protected. |
| 14 | A | input | Receiver noninverting input, ±15 kV HBM ESD protected. |
| 15 | VISOIN | power_in | Isolated power supply input that must be connected externally to VISOOUT, with 0.1 µF and 0.01 µF decoupling capacitors recommended between Pin 15 and Pin 16. |
| 16 | GND2 | power_in | Ground, bus side. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-16-300mil |
| Category | Interface ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply current, 16 Mbps, 120 Ω load | ICC | 175 | mA | Data Rate = 16 Mbps, 120 Ω load between Y and Z | 3 | ||
| Supply current, 16 Mbps, 54 Ω load | ICC | 260 | mA | Data Rate = 16 Mbps, 54 Ω load between Y and Z | 3 | ||
| Supply current, 16 Mbps, 4.5-5.5 V, 120 Ω load | ICC | 130 | mA | Data Rate = 16 Mbps, 4.5 ≤ VCC ≤ 5.5 V, 120 Ω load between Y and Z | 3 | ||
| Supply current, 16 Mbps, 4.5-5.5 V, 54 Ω load | ICC | 200 | mA | Data Rate = 16 Mbps, 4.5 ≤ VCC ≤ 5.5 V, 54 Ω load between Y and Z | 3 | ||
| Differential output voltage, loaded (RS-422) | /VOD2/ | 2 | 3.6 | V | RL = 100 Ω (RS-422), see Figure 29 | 3 | |
| Differential output voltage, loaded (RS-485) | /VOD2/ | 1.5 | 3.6 | V | RL = 54 Ω (RS-485), see Figure 29 | 3 | |
| Differential output voltage over common mode | /VOD3/ | 1.5 | 3.6 | V | −7 V ≤ VTEST1 ≤ 12 V, see Figure 30 | 3 | |
| Delta VOD complementary output states | Δ/VOD/ | 0.2 | V | RL = 54 Ω or 100 Ω, see Figure 29 | 3 | ||
| Common-mode output voltage | VOC | 3 | V | RL = 54 Ω or 100 Ω, see Figure 29 | 3 | ||
| Delta VOC complementary output states | Δ/VOC/ | 0.2 | V | RL = 54 Ω or 100 Ω, see Figure 29 | 3 | ||
| Driver short-circuit output current | IOS | 200 | mA | 3 | |||
| Output leakage current (Y, Z), VIN = 12 V | IO | 30 | µA | DE = 0 V, RE = 0 V, VCC = 0 V or 3.6 V, VIN = 12 V | 3 | ||
| Output leakage current (Y, Z), VIN = −7 V | IO | -30 | µA | DE = 0 V, RE = 0 V, VCC = 0 V or 3.6 V, VIN = −7 V | 3 | ||
| Logic input current | II | -10 | 0.01 | 10 | µA | DE, RE, TxD | 3 |
| Differential input threshold voltage | VTH | -200 | -125 | -30 | mV | −7 V < VCM < +12 V | 3 |
| Input voltage hysteresis | VHYS | 15 | mV | VOC = 0 V | 3 | ||
| Receiver input current (A, B), VIN = 12 V | II | 125 | µA | DE = 0 V, VCC = 0 V or 3.6 V, VIN = 12 V | 3 | ||
| Receiver input current (A, B), VIN = −7 V | II | -100 | µA | DE = 0 V, VCC = 0 V or 3.6 V, VIN = −7 V | 3 | ||
| Line input resistance | RIN | 96 | kΩ | −7 V < VCM < +12 V | 3 | ||
| Receiver output voltage low | VOL | 0.2 | 0.4 | V | IO = 1.5 mA, VA − VB = −0.2 V | 3 | |
| Receiver short-circuit current | 100 | mA | 3 | ||||
| Common-mode transient immunity | CM | 25 | kV/µs | VCM = 1 kV, transient magnitude = 800 V | 3 | ||
| Isolated supply voltage | VISOOUT | 3.3 | V | 3 | |||
| Driver maximum data rate | 16 | Mbps | TA = −40°C to +85°C | 4 | |||
| Driver propagation delay, low to high | tDPLH | 63 | 100 | ns | RL = 54 Ω, CL1 = CL2 = 100 pF, see Figure 31 and Figure 35 | 4 | |
| Driver propagation delay, high to low | tDPHL | 64 | 100 | ns | RL = 54 Ω, CL1 = CL2 = 100 pF, see Figure 31 and Figure 35 | 4 | |
| Driver output skew | tSKEW | 1 | 8 | ns | RL = 54 Ω, CL1 = CL2 = 100 pF, see Figure 31 and Figure 35 | 4 | |
| Driver rise/fall time | tDR, tDF | 15 | ns | RL = 54 Ω, CL1 = CL2 = 100 pF, see Figure 31 and Figure 35 | 4 | ||
| Driver enable time | tZL, tZH | 120 | ns | RL = 110 Ω, CL = 50 pF, see Figure 32 and Figure 37 | 4 | ||
| Driver disable time | tLZ, tHZ | 150 | ns | RL = 110 Ω, CL = 50 pF, see Figure 32 and Figure 37 | 4 | ||
| Receiver propagation delay, low to high | tRPLH | 94 | 110 | ns | CL = 15 pF, see Figure 33 and Figure 36 | 4 | |
| Receiver propagation delay, high to low | tRPHL | 95 | 110 | ns | CL = 15 pF, see Figure 33 and Figure 36 | 4 | |
| Receiver output skew | tSKEW | 1 | 12 | ns | CL = 15 pF, see Figure 33 and Figure 36 | 4 | |
| Receiver enable time | tZL, tZH | 15 | ns | RL = 1 kΩ, CL = 15 pF, see Figure 34 and Figure 38 | 4 | ||
| Receiver disable time | tLZ, tHZ | 15 | ns | RL = 1 kΩ, CL = 15 pF, see Figure 34 and Figure 38 | 4 | ||
| Input-to-output resistance | RI-O | 1012 | Ω | Device considered a 2-terminal device | 4 | ||
| Input-to-output capacitance | CI-O | 3 | pF | f = 1 MHz | 4 | ||
| Input capacitance | CI | 4 | pF | From any input data pin to ground | 4 | ||
| Supply voltage range | VCC | 3 | 5.5 | V | All voltages relative to their respective ground | 3 | |
| Supply voltage | VCC | -0.5 | 7 | V | TA = 25°C | 7 | |
| Driver output/receiver input voltage | -9 | 14 | V | TA = 25°C | 7 | ||
| Operating temperature range | -40 | 85 | °C | 7 | |||
| Storage temperature range | -55 | 150 | °C | 7 | |||
| ESD (HBM) on A, B, Y, Z pins | -15 | 15 | kV | Human Body Model | 7 | ||
| ESD (HBM) on other pins | -2 | 2 | kV | Human Body Model | 7 | ||
| Thermal resistance junction to ambient | θJA | 52 | °C/W | 7 | |||
| Lead temperature, soldering | 260 | °C | Soldering (10 sec) | 7 | |||
| Rated dielectric insulation voltage | 5000 | V rms | 1-minute duration | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | VDE 0884-10 Insulation Characteristics................................... 6 Absolute Maximum Ratings............................................................ 7 | 2 |
CAD (KiCad official)
- Symbol:
ADM2682EBRIZ-RL7 - Footprint:
Package_SO:SOIC-16W_7.5x12.8mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
adm2682ebriz-etched.step/adm2682ebriz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adm2682ebriz.step/adm2682ebriz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
695b0323f171535f, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ADM2682EBRIZ-RL7
**Analog Devices** · RS-485 & RS-422 · SOIC-16-300mil
ADM2682EBRIZ-RL7 from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND1 | power_in | Ground, logic side. |
| 2 | VCC | power_in | Logic side power supply (3.0 V to 5.5 V); a 0.1 µF and a 0.01 µF decoupling capacitor are recommended between Pin 2 and Pin 1. |
| 3 | RxD | output | Receiver output data, high when (A − B) ≥ −30 mV and low when (A − B) ≤ −200 mV, tristated when RE is driven high. |
| 4 | RE | input | Active-low receiver enable input; driving low enables the receiver and driving high disables it. |
| 5 | DE | input | Driver enable input; driving high enables the driver and driving low disables it. |
| 6 | TxD | input | Driver input; data to be transmitted by the driver is applied to this input. |
| 7 | VCC | power_in | Logic side power supply (3.0 V to 5.5 V); a 0.1 µF and a 10 µF decoupling capacitor are recommended between Pin 7 and Pin 8. |
| 8 | GND1 | power_in | Ground, logic side. |
| 9 | GND2 | power_in | Ground, bus side. |
| 10 | VISOOUT | power_out | Isolated power supply output (3.3 V) that must be connected externally to VISOIN, with a 10 µF reservoir capacitor and 0.1 µF decoupling capacitor recommended between Pin 10 and Pin 9. |
| 11 | Y | output | Driver noninverting output, ±15 kV HBM ESD protected. |
| 12 | Z | output | Driver inverting output, ±15 kV HBM ESD protected. |
| 13 | B | input | Receiver inverting input, ±15 kV HBM ESD protected. |
| 14 | A | input | Receiver noninverting input, ±15 kV HBM ESD protected. |
| 15 | VISOIN | power_in | Isolated power supply input that must be connected externally to VISOOUT, with 0.1 µF and 0.01 µF decoupling capacitors recommended between Pin 15 and Pin 16. |
| 16 | GND2 | power_in | Ground, bus side. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-16-300mil |
| Category | Interface ICs |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply current, 16 Mbps, 120 Ω load | ICC | | | 175 | mA | Data Rate = 16 Mbps, 120 Ω load between Y and Z | 3 |
| Supply current, 16 Mbps, 54 Ω load | ICC | | | 260 | mA | Data Rate = 16 Mbps, 54 Ω load between Y and Z | 3 |
| Supply current, 16 Mbps, 4.5-5.5 V, 120 Ω load | ICC | | | 130 | mA | Data Rate = 16 Mbps, 4.5 ≤ VCC ≤ 5.5 V, 120 Ω load between Y and Z | 3 |
| Supply current, 16 Mbps, 4.5-5.5 V, 54 Ω load | ICC | | | 200 | mA | Data Rate = 16 Mbps, 4.5 ≤ VCC ≤ 5.5 V, 54 Ω load between Y and Z | 3 |
| Differential output voltage, loaded (RS-422) | /VOD2/ | 2 | 3.6 | | V | RL = 100 Ω (RS-422), see Figure 29 | 3 |
| Differential output voltage, loaded (RS-485) | /VOD2/ | 1.5 | 3.6 | | V | RL = 54 Ω (RS-485), see Figure 29 | 3 |
| Differential output voltage over common mode | /VOD3/ | 1.5 | 3.6 | | V | −7 V ≤ VTEST1 ≤ 12 V, see Figure 30 | 3 |
| Delta VOD complementary output states | Δ/VOD/ | | | 0.2 | V | RL = 54 Ω or 100 Ω, see Figure 29 | 3 |
| Common-mode output voltage | VOC | | | 3 | V | RL = 54 Ω or 100 Ω, see Figure 29 | 3 |
| Delta VOC complementary output states | Δ/VOC/ | | | 0.2 | V | RL = 54 Ω or 100 Ω, see Figure 29 | 3 |
| Driver short-circuit output current | IOS | | | 200 | mA | | 3 |
| Output leakage current (Y, Z), VIN = 12 V | IO | | | 30 | µA | DE = 0 V, RE = 0 V, VCC = 0 V or 3.6 V, VIN = 12 V | 3 |
| Output leakage current (Y, Z), VIN = −7 V | IO | -30 | | | µA | DE = 0 V, RE = 0 V, VCC = 0 V or 3.6 V, VIN = −7 V | 3 |
| Logic input current | II | -10 | 0.01 | 10 | µA | DE, RE, TxD | 3 |
| Differential input threshold voltage | VTH | -200 | -125 | -30 | mV | −7 V < VCM < +12 V | 3 |
| Input voltage hysteresis | VHYS | | 15 | | mV | VOC = 0 V | 3 |
| Receiver input current (A, B), VIN = 12 V | II | | | 125 | µA | DE = 0 V, VCC = 0 V or 3.6 V, VIN = 12 V | 3 |
| Receiver input current (A, B), VIN = −7 V | II | -100 | | | µA | DE = 0 V, VCC = 0 V or 3.6 V, VIN = −7 V | 3 |
| Line input resistance | RIN | 96 | | | kΩ | −7 V < VCM < +12 V | 3 |
| Receiver output voltage low | VOL | | 0.2 | 0.4 | V | IO = 1.5 mA, VA − VB = −0.2 V | 3 |
| Receiver short-circuit current | | | | 100 | mA | | 3 |
| Common-mode transient immunity | CM | 25 | | | kV/µs | VCM = 1 kV, transient magnitude = 800 V | 3 |
| Isolated supply voltage | VISOOUT | | 3.3 | | V | | 3 |
| Driver maximum data rate | | 16 | | | Mbps | TA = −40°C to +85°C | 4 |
| Driver propagation delay, low to high | tDPLH | | 63 | 100 | ns | RL = 54 Ω, CL1 = CL2 = 100 pF, see Figure 31 and Figure 35 | 4 |
| Driver propagation delay, high to low | tDPHL | | 64 | 100 | ns | RL = 54 Ω, CL1 = CL2 = 100 pF, see Figure 31 and Figure 35 | 4 |
| Driver output skew | tSKEW | | 1 | 8 | ns | RL = 54 Ω, CL1 = CL2 = 100 pF, see Figure 31 and Figure 35 | 4 |
| Driver rise/fall time | tDR, tDF | | | 15 | ns | RL = 54 Ω, CL1 = CL2 = 100 pF, see Figure 31 and Figure 35 | 4 |
| Driver enable time | tZL, tZH | | | 120 | ns | RL = 110 Ω, CL = 50 pF, see Figure 32 and Figure 37 | 4 |
| Driver disable time | tLZ, tHZ | | | 150 | ns | RL = 110 Ω, CL = 50 pF, see Figure 32 and Figure 37 | 4 |
| Receiver propagation delay, low to high | tRPLH | | 94 | 110 | ns | CL = 15 pF, see Figure 33 and Figure 36 | 4 |
| Receiver propagation delay, high to low | tRPHL | | 95 | 110 | ns | CL = 15 pF, see Figure 33 and Figure 36 | 4 |
| Receiver output skew | tSKEW | | 1 | 12 | ns | CL = 15 pF, see Figure 33 and Figure 36 | 4 |
| Receiver enable time | tZL, tZH | | | 15 | ns | RL = 1 kΩ, CL = 15 pF, see Figure 34 and Figure 38 | 4 |
| Receiver disable time | tLZ, tHZ | | | 15 | ns | RL = 1 kΩ, CL = 15 pF, see Figure 34 and Figure 38 | 4 |
| Input-to-output resistance | RI-O | | 1012 | | Ω | Device considered a 2-terminal device | 4 |
| Input-to-output capacitance | CI-O | | 3 | | pF | f = 1 MHz | 4 |
| Input capacitance | CI | | 4 | | pF | From any input data pin to ground | 4 |
| Supply voltage range | VCC | 3 | | 5.5 | V | All voltages relative to their respective ground | 3 |
| Supply voltage | VCC | -0.5 | | 7 | V | TA = 25°C | 7 |
| Driver output/receiver input voltage | | -9 | | 14 | V | TA = 25°C | 7 |
| Operating temperature range | | -40 | | 85 | °C | | 7 |
| Storage temperature range | | -55 | | 150 | °C | | 7 |
| ESD (HBM) on A, B, Y, Z pins | | -15 | | 15 | kV | Human Body Model | 7 |
| ESD (HBM) on other pins | | -2 | | 2 | kV | Human Body Model | 7 |
| Thermal resistance junction to ambient | θJA | | 52 | | °C/W | | 7 |
| Lead temperature, soldering | | | | 260 | °C | Soldering (10 sec) | 7 |
| Rated dielectric insulation voltage | | | 5000 | | V rms | 1-minute duration | 5 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | | VDE 0884-10 Insulation Characteristics................................... 6 Absolute Maximum Ratings............................................................ 7 | 2 |
## CAD (KiCad official)
- Symbol: `ADM2682EBRIZ-RL7`
- Footprint: `Package_SO:SOIC-16W_7.5x12.8mm_P1.27mm`
- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files: `adm2682ebriz-etched.step` / `adm2682ebriz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `adm2682ebriz.step` / `adm2682ebriz.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/ADM2682E_2687E.pdf) (24 pp, sha256 `695b0323f171535f`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/adm2682ebriz-datasheet.pdf)