main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers adm2682ebriz: viewers · Ray
adm2682ebriz-etched.glb adm2682ebriz: factory component page (tier=mfr) · Ray
adm2682ebriz-etched.step adm2682ebriz: factory component page (tier=mfr) · Ray
adm2682ebriz-hero.glb adm2682ebriz: hero GLB from the etched model (keeps the MPN mark) · Ray
adm2682ebriz-hero.overlay.json adm2682ebriz: hero GLB from the etched model (keeps the MPN mark) · Ray
adm2682ebriz.glb Publish 0.1.0 · Ray
adm2682ebriz.kicad_mod Publish 0.1.0 · Ray
adm2682ebriz.kicad_sym Publish 0.1.0 · Ray
adm2682ebriz.lbr Publish 0.1.0 · Ray
adm2682ebriz.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 16 pins · Ray

ADM2682EBRIZ-RL7

Analog Devices · RS-485 & RS-422 · SOIC-16-300mil

ADM2682EBRIZ-RL7 from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND1 power_in Ground, logic side.
2 VCC power_in Logic side power supply (3.0 V to 5.5 V); a 0.1 µF and a 0.01 µF decoupling capacitor are recommended between Pin 2 and Pin 1.
3 RxD output Receiver output data, high when (A − B) ≥ −30 mV and low when (A − B) ≤ −200 mV, tristated when RE is driven high.
4 RE input Active-low receiver enable input; driving low enables the receiver and driving high disables it.
5 DE input Driver enable input; driving high enables the driver and driving low disables it.
6 TxD input Driver input; data to be transmitted by the driver is applied to this input.
7 VCC power_in Logic side power supply (3.0 V to 5.5 V); a 0.1 µF and a 10 µF decoupling capacitor are recommended between Pin 7 and Pin 8.
8 GND1 power_in Ground, logic side.
9 GND2 power_in Ground, bus side.
10 VISOOUT power_out Isolated power supply output (3.3 V) that must be connected externally to VISOIN, with a 10 µF reservoir capacitor and 0.1 µF decoupling capacitor recommended between Pin 10 and Pin 9.
11 Y output Driver noninverting output, ±15 kV HBM ESD protected.
12 Z output Driver inverting output, ±15 kV HBM ESD protected.
13 B input Receiver inverting input, ±15 kV HBM ESD protected.
14 A input Receiver noninverting input, ±15 kV HBM ESD protected.
15 VISOIN power_in Isolated power supply input that must be connected externally to VISOOUT, with 0.1 µF and 0.01 µF decoupling capacitors recommended between Pin 15 and Pin 16.
16 GND2 power_in Ground, bus side.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOIC-16-300mil
Category Interface ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply current, 16 Mbps, 120 Ω load ICC 175 mA Data Rate = 16 Mbps, 120 Ω load between Y and Z 3
Supply current, 16 Mbps, 54 Ω load ICC 260 mA Data Rate = 16 Mbps, 54 Ω load between Y and Z 3
Supply current, 16 Mbps, 4.5-5.5 V, 120 Ω load ICC 130 mA Data Rate = 16 Mbps, 4.5 ≤ VCC ≤ 5.5 V, 120 Ω load between Y and Z 3
Supply current, 16 Mbps, 4.5-5.5 V, 54 Ω load ICC 200 mA Data Rate = 16 Mbps, 4.5 ≤ VCC ≤ 5.5 V, 54 Ω load between Y and Z 3
Differential output voltage, loaded (RS-422) /VOD2/ 2 3.6 V RL = 100 Ω (RS-422), see Figure 29 3
Differential output voltage, loaded (RS-485) /VOD2/ 1.5 3.6 V RL = 54 Ω (RS-485), see Figure 29 3
Differential output voltage over common mode /VOD3/ 1.5 3.6 V −7 V ≤ VTEST1 ≤ 12 V, see Figure 30 3
Delta VOD complementary output states Δ/VOD/ 0.2 V RL = 54 Ω or 100 Ω, see Figure 29 3
Common-mode output voltage VOC 3 V RL = 54 Ω or 100 Ω, see Figure 29 3
Delta VOC complementary output states Δ/VOC/ 0.2 V RL = 54 Ω or 100 Ω, see Figure 29 3
Driver short-circuit output current IOS 200 mA 3
Output leakage current (Y, Z), VIN = 12 V IO 30 µA DE = 0 V, RE = 0 V, VCC = 0 V or 3.6 V, VIN = 12 V 3
Output leakage current (Y, Z), VIN = −7 V IO -30 µA DE = 0 V, RE = 0 V, VCC = 0 V or 3.6 V, VIN = −7 V 3
Logic input current II -10 0.01 10 µA DE, RE, TxD 3
Differential input threshold voltage VTH -200 -125 -30 mV −7 V < VCM < +12 V 3
Input voltage hysteresis VHYS 15 mV VOC = 0 V 3
Receiver input current (A, B), VIN = 12 V II 125 µA DE = 0 V, VCC = 0 V or 3.6 V, VIN = 12 V 3
Receiver input current (A, B), VIN = −7 V II -100 µA DE = 0 V, VCC = 0 V or 3.6 V, VIN = −7 V 3
Line input resistance RIN 96 kΩ −7 V < VCM < +12 V 3
Receiver output voltage low VOL 0.2 0.4 V IO = 1.5 mA, VA − VB = −0.2 V 3
Receiver short-circuit current 100 mA 3
Common-mode transient immunity CM 25 kV/µs VCM = 1 kV, transient magnitude = 800 V 3
Isolated supply voltage VISOOUT 3.3 V 3
Driver maximum data rate 16 Mbps TA = −40°C to +85°C 4
Driver propagation delay, low to high tDPLH 63 100 ns RL = 54 Ω, CL1 = CL2 = 100 pF, see Figure 31 and Figure 35 4
Driver propagation delay, high to low tDPHL 64 100 ns RL = 54 Ω, CL1 = CL2 = 100 pF, see Figure 31 and Figure 35 4
Driver output skew tSKEW 1 8 ns RL = 54 Ω, CL1 = CL2 = 100 pF, see Figure 31 and Figure 35 4
Driver rise/fall time tDR, tDF 15 ns RL = 54 Ω, CL1 = CL2 = 100 pF, see Figure 31 and Figure 35 4
Driver enable time tZL, tZH 120 ns RL = 110 Ω, CL = 50 pF, see Figure 32 and Figure 37 4
Driver disable time tLZ, tHZ 150 ns RL = 110 Ω, CL = 50 pF, see Figure 32 and Figure 37 4
Receiver propagation delay, low to high tRPLH 94 110 ns CL = 15 pF, see Figure 33 and Figure 36 4
Receiver propagation delay, high to low tRPHL 95 110 ns CL = 15 pF, see Figure 33 and Figure 36 4
Receiver output skew tSKEW 1 12 ns CL = 15 pF, see Figure 33 and Figure 36 4
Receiver enable time tZL, tZH 15 ns RL = 1 kΩ, CL = 15 pF, see Figure 34 and Figure 38 4
Receiver disable time tLZ, tHZ 15 ns RL = 1 kΩ, CL = 15 pF, see Figure 34 and Figure 38 4
Input-to-output resistance RI-O 1012 Ω Device considered a 2-terminal device 4
Input-to-output capacitance CI-O 3 pF f = 1 MHz 4
Input capacitance CI 4 pF From any input data pin to ground 4
Supply voltage range VCC 3 5.5 V All voltages relative to their respective ground 3
Supply voltage VCC -0.5 7 V TA = 25°C 7
Driver output/receiver input voltage -9 14 V TA = 25°C 7
Operating temperature range -40 85 °C 7
Storage temperature range -55 150 °C 7
ESD (HBM) on A, B, Y, Z pins -15 15 kV Human Body Model 7
ESD (HBM) on other pins -2 2 kV Human Body Model 7
Thermal resistance junction to ambient θJA 52 °C/W 7
Lead temperature, soldering 260 °C Soldering (10 sec) 7
Rated dielectric insulation voltage 5000 V rms 1-minute duration 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing Abs VDE 0884-10 Insulation Characteristics................................... 6 Absolute Maximum Ratings............................................................ 7 2

CAD (KiCad official)

  • Symbol: ADM2682EBRIZ-RL7
  • Footprint: Package_SO:SOIC-16W_7.5x12.8mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: adm2682ebriz-etched.step / adm2682ebriz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adm2682ebriz.step / adm2682ebriz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (24 pp, sha256 695b0323f171535f, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF