main
Ray
Publish 0.1.0
6b220a4
ADM232AARWZ
Analog Devices · RS232 ICs · SOIC-16-300mil
ADM232AARWZ from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | External capacitor 1 positive terminal connects to this pin for the on-chip charge pump. |
| 2 | V+ | power_out | Internally generated positive supply, +10 V nominal, which may power external circuitry if current requirements are small. |
| 3 | C1- | passive | External capacitor 1 negative terminal connects to this pin for the on-chip charge pump. |
| 4 | C2+ | passive | External capacitor 2 positive terminal connects to this pin for the on-chip charge pump. |
| 5 | C2- | passive | External capacitor 2 negative terminal connects to this pin for the on-chip charge pump. |
| 6 | V- | power_out | Internally generated negative supply, -10 V nominal, which may power external circuitry if current requirements are small. |
| 7 | T2OUT | output | Transmitter 2 RS-232 level output, typically ±9 V. |
| 8 | R2IN | input | Receiver 2 RS-232 input accepting signal levels up to ±30 V, with an internal 5 kΩ pull-down to GND. |
| 9 | R2OUT | output | Receiver 2 TTL/CMOS level output. |
| 10 | T2IN | input | Transmitter 2 TTL/CMOS input with an internal 400 kΩ pull-up to VCC; unused inputs may be left unconnected. |
| 11 | T1IN | input | Transmitter 1 TTL/CMOS input with an internal 400 kΩ pull-up to VCC; unused inputs may be left unconnected. |
| 12 | R1OUT | output | Receiver 1 TTL/CMOS level output. |
| 13 | R1IN | input | Receiver 1 RS-232 input accepting signal levels up to ±30 V, with an internal 5 kΩ pull-down to GND. |
| 14 | T1OUT | output | Transmitter 1 RS-232 level output, typically ±9 V. |
| 15 | GND | power_in | Ground pin, must be connected to 0 V. |
| 16 | VCC | power_in | Power supply input, 5 V ±10%. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-16-300mil |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Swing | -5 | 9 | V | All Transmitter Outputs Loaded with 3 kΩ to Ground | 2 | ||
| Input Logic Threshold Low | VINL | 1.7 | 0.8 | V | TIN | 2 | |
| Input Logic Threshold High | VINH | 2.4 | 1.7 | V | TIN | 2 | |
| Logic Pull-Up Current | 12 | 40 | µA | TIN = 0 V | 2 | ||
| Data Rate | 200 | kB/s | 2 | ||||
| Output Resistance | 300 | Ω | VCC = V+ = V- = 0 V, VOUT = ±2 V | 2 | |||
| Output Short Circuit Current (Instantaneous) | -10 | 10 | mA | 2 | |||
| RS-232 Input Voltage Range | -30 | 30 | V | 2 | |||
| RS-232 Input Threshold Low | 0.8 | 1.2 | V | 2 | |||
| RS-232 Input Threshold High | 1.6 | 2.4 | V | 2 | |||
| RS-232 Input Hysteresis | 0.2 | 0.4 | 1 | V | VCC = 5 V | 2 | |
| RS-232 Input Resistance | 3 | 5 | 7 | kΩ | TA = 0°C to 85°C | 2 | |
| TTL/CMOS Output Voltage Low | VOL | 0.05 | 0.4 | V | IOUT = 3.2 mA | 2 | |
| TTL/CMOS Output Voltage High | VOH | 3.5 | V | IOUT = -1.0 mA | 2 | ||
| TTL/CMOS Output Short-Circuit Current (Source) | -85 | -2 | mA | Source Current (VOUT = GND) | 2 | ||
| TTL/CMOS Output Short-Circuit Current (Sink) | 10 | 35 | mA | Sink Current (VOUT = VCC) | 2 | ||
| Power Supply Current | 4 | 8 | mA | No Load | 2 | ||
| Power Supply Current (loaded) | 13 | mA | 3 kΩ Load on Both Outputs | 2 | |||
| Transition Region Slew Rate | 3 | 8 | 30 | V/µs | CL = 50 pF to 1000 pF, RL = 3 kΩ to 7 kΩ; measured from +3 V to -3 V or -3 V to +3 V | 2 | |
| Transmitter Propagation Delay TTL to RS-232 (high-to-low) | tPHLT | 0.85 | 3.5 | µs | 2 | ||
| Transmitter Propagation Delay TTL to RS-232 (low-to-high) | tPLHT | 1 | 3.5 | µs | 2 | ||
| Receiver Propagation Delay RS-232 to TTL (high-to-low) | tPHLR | 0.1 | 0.5 | µs | 2 | ||
| Receiver Propagation Delay RS-232 to TTL (low-to-high) | tPLHR | 0.3 | 0.5 | µs | 2 | ||
| Transmitter + to, Propagation Delay Difference | 150 | ns | 2 | ||||
| Receiver + to, Propagation Delay Difference | 200 | ns | 2 | ||||
| Supply voltage tolerance (nominal VCC = 5 V) | VCC | -10 | 10 | % | VCC = 5 V ±10% | 2 | |
| Operating temperature range (Industrial, A Version) | -40 | 85 | °C | Industrial (A Version) | 3 | ||
| Supply voltage VCC (absolute maximum) | VCC | 6 | V | 3 | |||
| Positive supply V+ (absolute maximum) | V+ | 13 | V | 3 | |||
| Negative supply V- (absolute maximum) | V- | -13 | 0.3 | V | 3 | ||
| TIN input voltage (absolute maximum) | TIN | -0.3 | V | 3 | |||
| RIN input voltage (absolute maximum) | RIN | -30 | 30 | V | 3 | ||
| ROUT output voltage (absolute maximum) | ROUT | -0.3 | V | 3 | |||
| Power Dissipation R-16W | 400 | mW | Derate 7 mW/°C above 70°C | 3 | |||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Lead Temperature (Soldering) | 300 | °C | 10 sec | 3 | |||
| Lead Temperature (Vapor Phase) | 215 | °C | 60 sec | 3 | |||
| Lead Temperature (Infrared) | 220 | °C | 15 sec | 3 | |||
| Thermal impedance θJA R-16W | θJA | 80 | °CW | R-16W package | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | to this pin. TIN Transmitter (Driver) Inputs. These inputs accept | 4 |
CAD (KiCad official)
- Symbol:
ADM232AARWZ - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
adm232aarwz-etched.step/adm232aarwz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adm232aarwz.step/adm232aarwz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (11 pp, sha256
fd5b8d666e4f713b, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ADM232AARWZ
**Analog Devices** · RS232 ICs · SOIC-16-300mil
ADM232AARWZ from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | External capacitor 1 positive terminal connects to this pin for the on-chip charge pump. |
| 2 | V+ | power_out | Internally generated positive supply, +10 V nominal, which may power external circuitry if current requirements are small. |
| 3 | C1- | passive | External capacitor 1 negative terminal connects to this pin for the on-chip charge pump. |
| 4 | C2+ | passive | External capacitor 2 positive terminal connects to this pin for the on-chip charge pump. |
| 5 | C2- | passive | External capacitor 2 negative terminal connects to this pin for the on-chip charge pump. |
| 6 | V- | power_out | Internally generated negative supply, -10 V nominal, which may power external circuitry if current requirements are small. |
| 7 | T2OUT | output | Transmitter 2 RS-232 level output, typically ±9 V. |
| 8 | R2IN | input | Receiver 2 RS-232 input accepting signal levels up to ±30 V, with an internal 5 kΩ pull-down to GND. |
| 9 | R2OUT | output | Receiver 2 TTL/CMOS level output. |
| 10 | T2IN | input | Transmitter 2 TTL/CMOS input with an internal 400 kΩ pull-up to VCC; unused inputs may be left unconnected. |
| 11 | T1IN | input | Transmitter 1 TTL/CMOS input with an internal 400 kΩ pull-up to VCC; unused inputs may be left unconnected. |
| 12 | R1OUT | output | Receiver 1 TTL/CMOS level output. |
| 13 | R1IN | input | Receiver 1 RS-232 input accepting signal levels up to ±30 V, with an internal 5 kΩ pull-down to GND. |
| 14 | T1OUT | output | Transmitter 1 RS-232 level output, typically ±9 V. |
| 15 | GND | power_in | Ground pin, must be connected to 0 V. |
| 16 | VCC | power_in | Power supply input, 5 V ±10%. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-16-300mil |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Swing | | -5 | 9 | | V | All Transmitter Outputs Loaded with 3 kΩ to Ground | 2 |
| Input Logic Threshold Low | VINL | | 1.7 | 0.8 | V | TIN | 2 |
| Input Logic Threshold High | VINH | 2.4 | 1.7 | | V | TIN | 2 |
| Logic Pull-Up Current | | 12 | | 40 | µA | TIN = 0 V | 2 |
| Data Rate | | 200 | | | kB/s | | 2 |
| Output Resistance | | 300 | | | Ω | VCC = V+ = V- = 0 V, VOUT = ±2 V | 2 |
| Output Short Circuit Current (Instantaneous) | | -10 | | 10 | mA | | 2 |
| RS-232 Input Voltage Range | | -30 | | 30 | V | | 2 |
| RS-232 Input Threshold Low | | 0.8 | 1.2 | | V | | 2 |
| RS-232 Input Threshold High | | 1.6 | 2.4 | | V | | 2 |
| RS-232 Input Hysteresis | | 0.2 | 0.4 | 1 | V | VCC = 5 V | 2 |
| RS-232 Input Resistance | | 3 | 5 | 7 | kΩ | TA = 0°C to 85°C | 2 |
| TTL/CMOS Output Voltage Low | VOL | | 0.05 | 0.4 | V | IOUT = 3.2 mA | 2 |
| TTL/CMOS Output Voltage High | VOH | 3.5 | | | V | IOUT = -1.0 mA | 2 |
| TTL/CMOS Output Short-Circuit Current (Source) | | -85 | | -2 | mA | Source Current (VOUT = GND) | 2 |
| TTL/CMOS Output Short-Circuit Current (Sink) | | 10 | 35 | | mA | Sink Current (VOUT = VCC) | 2 |
| Power Supply Current | | | 4 | 8 | mA | No Load | 2 |
| Power Supply Current (loaded) | | | | 13 | mA | 3 kΩ Load on Both Outputs | 2 |
| Transition Region Slew Rate | | 3 | 8 | 30 | V/µs | CL = 50 pF to 1000 pF, RL = 3 kΩ to 7 kΩ; measured from +3 V to -3 V or -3 V to +3 V | 2 |
| Transmitter Propagation Delay TTL to RS-232 (high-to-low) | tPHLT | | 0.85 | 3.5 | µs | | 2 |
| Transmitter Propagation Delay TTL to RS-232 (low-to-high) | tPLHT | | 1 | 3.5 | µs | | 2 |
| Receiver Propagation Delay RS-232 to TTL (high-to-low) | tPHLR | | 0.1 | 0.5 | µs | | 2 |
| Receiver Propagation Delay RS-232 to TTL (low-to-high) | tPLHR | | 0.3 | 0.5 | µs | | 2 |
| Transmitter + to, Propagation Delay Difference | | | | 150 | ns | | 2 |
| Receiver + to, Propagation Delay Difference | | | | 200 | ns | | 2 |
| Supply voltage tolerance (nominal VCC = 5 V) | VCC | -10 | | 10 | % | VCC = 5 V ±10% | 2 |
| Operating temperature range (Industrial, A Version) | | -40 | | 85 | °C | Industrial (A Version) | 3 |
| Supply voltage VCC (absolute maximum) | VCC | | | 6 | V | | 3 |
| Positive supply V+ (absolute maximum) | V+ | | | 13 | V | | 3 |
| Negative supply V- (absolute maximum) | V- | -13 | | 0.3 | V | | 3 |
| TIN input voltage (absolute maximum) | TIN | -0.3 | | | V | | 3 |
| RIN input voltage (absolute maximum) | RIN | -30 | | 30 | V | | 3 |
| ROUT output voltage (absolute maximum) | ROUT | -0.3 | | | V | | 3 |
| Power Dissipation R-16W | | | | 400 | mW | Derate 7 mW/°C above 70°C | 3 |
| Storage Temperature Range | | -65 | | 150 | °C | | 3 |
| Lead Temperature (Soldering) | | | | 300 | °C | 10 sec | 3 |
| Lead Temperature (Vapor Phase) | | | | 215 | °C | 60 sec | 3 |
| Lead Temperature (Infrared) | | | | 220 | °C | 15 sec | 3 |
| Thermal impedance θJA R-16W | θJA | | 80 | | °CW | R-16W package | 3 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | to this pin. TIN Transmitter (Driver) Inputs. These inputs accept | 4 |
## CAD (KiCad official)
- Symbol: `ADM232AARWZ`
- Footprint: `Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm`
- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files: `adm232aarwz-etched.step` / `adm232aarwz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `adm232aarwz.step` / `adm232aarwz.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/ADM222_232A_242.pdf) (11 pp, sha256 `fd5b8d666e4f713b`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/adm232aarwz-datasheet.pdf)