Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ADM232AARWZ

Analog Devices · RS232 ICs · SOIC-16-300mil

ADM232AARWZ from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive External capacitor 1 positive terminal connects to this pin for the on-chip charge pump.
2 V+ power_out Internally generated positive supply, +10 V nominal, which may power external circuitry if current requirements are small.
3 C1- passive External capacitor 1 negative terminal connects to this pin for the on-chip charge pump.
4 C2+ passive External capacitor 2 positive terminal connects to this pin for the on-chip charge pump.
5 C2- passive External capacitor 2 negative terminal connects to this pin for the on-chip charge pump.
6 V- power_out Internally generated negative supply, -10 V nominal, which may power external circuitry if current requirements are small.
7 T2OUT output Transmitter 2 RS-232 level output, typically ±9 V.
8 R2IN input Receiver 2 RS-232 input accepting signal levels up to ±30 V, with an internal 5 kΩ pull-down to GND.
9 R2OUT output Receiver 2 TTL/CMOS level output.
10 T2IN input Transmitter 2 TTL/CMOS input with an internal 400 kΩ pull-up to VCC; unused inputs may be left unconnected.
11 T1IN input Transmitter 1 TTL/CMOS input with an internal 400 kΩ pull-up to VCC; unused inputs may be left unconnected.
12 R1OUT output Receiver 1 TTL/CMOS level output.
13 R1IN input Receiver 1 RS-232 input accepting signal levels up to ±30 V, with an internal 5 kΩ pull-down to GND.
14 T1OUT output Transmitter 1 RS-232 level output, typically ±9 V.
15 GND power_in Ground pin, must be connected to 0 V.
16 VCC power_in Power supply input, 5 V ±10%.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOIC-16-300mil
Category Communication Interface Chip/UART/485/232
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Swing -5 9 V All Transmitter Outputs Loaded with 3 kΩ to Ground 2
Input Logic Threshold Low VINL 1.7 0.8 V TIN 2
Input Logic Threshold High VINH 2.4 1.7 V TIN 2
Logic Pull-Up Current 12 40 µA TIN = 0 V 2
Data Rate 200 kB/s 2
Output Resistance 300 Ω VCC = V+ = V- = 0 V, VOUT = ±2 V 2
Output Short Circuit Current (Instantaneous) -10 10 mA 2
RS-232 Input Voltage Range -30 30 V 2
RS-232 Input Threshold Low 0.8 1.2 V 2
RS-232 Input Threshold High 1.6 2.4 V 2
RS-232 Input Hysteresis 0.2 0.4 1 V VCC = 5 V 2
RS-232 Input Resistance 3 5 7 kΩ TA = 0°C to 85°C 2
TTL/CMOS Output Voltage Low VOL 0.05 0.4 V IOUT = 3.2 mA 2
TTL/CMOS Output Voltage High VOH 3.5 V IOUT = -1.0 mA 2
TTL/CMOS Output Short-Circuit Current (Source) -85 -2 mA Source Current (VOUT = GND) 2
TTL/CMOS Output Short-Circuit Current (Sink) 10 35 mA Sink Current (VOUT = VCC) 2
Power Supply Current 4 8 mA No Load 2
Power Supply Current (loaded) 13 mA 3 kΩ Load on Both Outputs 2
Transition Region Slew Rate 3 8 30 V/µs CL = 50 pF to 1000 pF, RL = 3 kΩ to 7 kΩ; measured from +3 V to -3 V or -3 V to +3 V 2
Transmitter Propagation Delay TTL to RS-232 (high-to-low) tPHLT 0.85 3.5 µs 2
Transmitter Propagation Delay TTL to RS-232 (low-to-high) tPLHT 1 3.5 µs 2
Receiver Propagation Delay RS-232 to TTL (high-to-low) tPHLR 0.1 0.5 µs 2
Receiver Propagation Delay RS-232 to TTL (low-to-high) tPLHR 0.3 0.5 µs 2
Transmitter + to, Propagation Delay Difference 150 ns 2
Receiver + to, Propagation Delay Difference 200 ns 2
Supply voltage tolerance (nominal VCC = 5 V) VCC -10 10 % VCC = 5 V ±10% 2
Operating temperature range (Industrial, A Version) -40 85 °C Industrial (A Version) 3
Supply voltage VCC (absolute maximum) VCC 6 V 3
Positive supply V+ (absolute maximum) V+ 13 V 3
Negative supply V- (absolute maximum) V- -13 0.3 V 3
TIN input voltage (absolute maximum) TIN -0.3 V 3
RIN input voltage (absolute maximum) RIN -30 30 V 3
ROUT output voltage (absolute maximum) ROUT -0.3 V 3
Power Dissipation R-16W 400 mW Derate 7 mW/°C above 70°C 3
Storage Temperature Range -65 150 °C 3
Lead Temperature (Soldering) 300 °C 10 sec 3
Lead Temperature (Vapor Phase) 215 °C 60 sec 3
Lead Temperature (Infrared) 220 °C 15 sec 3
Thermal impedance θJA R-16W θJA 80 °CW R-16W package 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin to this pin. TIN Transmitter (Driver) Inputs. These inputs accept 4

CAD (KiCad official)

  • Symbol: ADM232AARWZ
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: adm232aarwz-etched.step / adm232aarwz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adm232aarwz.step / adm232aarwz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (11 pp, sha256 fd5b8d666e4f713b, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF