main
Ray
Publish 0.1.0
f0be9bb
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242
{
"slug": "adm202jrwz",
"version": "0.1.0",
"type": "component",
"description": "Analog Devices RS232 ICs, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"communication interface chip",
"adm202jrwz",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"adm202jrwz.kicad_sym",
"adm202jrwz.kicad_mod",
"adm202jrwz.glb",
"adm202jrwz.step",
"adm202jrwz.lbr",
"docs/hero.png",
"docs/adm202jrwz-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"adm202jrwz-hero.glb",
"adm202jrwz-hero.overlay.json",
"adm202jrwz-etched.glb"
],
"component": {
"mpn": "ADM202JRWZ",
"manufacturer": "Analog Devices",
"package": "SOIC-16-300mil",
"pin_count": 16,
"category": "Communication Interface Chip",
"subcategory": "RS232 ICs",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADM202.pdf",
"parts": {
"symbol": "adm202jrwz.kicad_sym",
"footprint": "adm202jrwz.kicad_mod",
"model_3d": "adm202jrwz-hero.glb",
"model_3d_plain": "adm202jrwz-etched.glb",
"model_3d_step": "adm202jrwz-etched.step",
"model_3d_step_plain": "adm202jrwz.step",
"lbr": "adm202jrwz.lbr"
},
"distributor_links": {
"lcsc": "C657996",
"digikey": "505-ADM202JRWZ-ND",
"mouser": "584-ADM202JRWZ"
},
"distributor_check": {
"checked_at": "2026-11-11T00:39:16Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "505-ADM202JRWZ-ND",
"status": "found"
},
"mouser": {
"pn": "584-ADM202JRWZ",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "C1+",
"type": "passive",
"description": "External positive terminal connection for charge pump capacitor C1, which is used to generate the internal ±10 V supplies."
},
{
"number": "2",
"name": "V+",
"type": "power_out",
"description": "Internally generated positive supply (+10 V nominal) that can power external circuitry only if the current requirements are small."
},
{
"number": "3",
"name": "C1−",
"type": "passive",
"description": "External negative terminal connection for charge pump capacitor C1."
},
{
"number": "4",
"name": "C2+",
"type": "passive",
"description": "External positive terminal connection for charge pump capacitor C2."
},
{
"number": "5",
"name": "C2−",
"type": "passive",
"description": "External negative terminal connection for charge pump capacitor C2."
},
{
"number": "6",
"name": "V−",
"type": "power_out",
"description": "Internally generated negative supply (−10 V nominal) that can power external circuitry only if the current requirements are small."
},
{
"number": "7",
"name": "T2OUT",
"type": "output",
"description": "RS-232 level transmitter (driver) output, typically ±10 V, with continuous short-circuit duration permitted and short-circuit current of ±10 mA to ±60 mA."
},
{
"number": "8",
"name": "R2IN",
"type": "input",
"description": "RS-232 receiver input that accepts ±30 V signal levels and has an internal 5 kΩ pull-down resistor to GND."
},
{
"number": "9",
"name": "R2OUT",
"type": "output",
"description": "TTL/CMOS receiver output, with VOL of 0.4 V maximum at 1.6 mA and VOH of 3.5 V minimum at −1.0 mA."
},
{
"number": "10",
"name": "T2IN",
"type": "input",
"description": "TTL/CMOS transmitter input with an internal 400 kΩ pull-up to VCC; if left unconnected the associated output is forced low."
},
{
"number": "11",
"name": "T1IN",
"type": "input",
"description": "TTL/CMOS transmitter input with an internal 400 kΩ pull-up to VCC; if left unconnected the associated output is forced low."
},
{
"number": "12",
"name": "R1OUT",
"type": "output",
"description": "TTL/CMOS receiver output, with VOL of 0.4 V maximum at 1.6 mA and VOH of 3.5 V minimum at −1.0 mA."
},
{
"number": "13",
"name": "R1IN",
"type": "input",
"description": "RS-232 receiver input that accepts ±30 V signal levels and has an internal 5 kΩ pull-down resistor to GND."
},
{
"number": "14",
"name": "T1OUT",
"type": "output",
"description": "RS-232 level transmitter (driver) output, typically ±10 V, with continuous short-circuit duration permitted and short-circuit current of ±10 mA to ±60 mA."
},
{
"number": "15",
"name": "GND",
"type": "power_in",
"description": "Ground pin that must be connected to 0 V."
},
{
"number": "16",
"name": "VCC",
"type": "power_in",
"description": "Power supply input of 5 V ±10%."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Table 3 labels pin 5 (mnemonic C2−) as 'External Negative Capacitor 1 Connection', which appears to ; Table 3 lists the pins as '7, 14' and the names as 'T2OUT, T1OUT' without an explicit pin-by-pin map; Table 3 pairs the names and pins in the same order, so pin-by-pin mapping for these rows is inferred"
],
"pages_sent": 10,
"cost_usd": 0.0595,
"at": "2026-11-11T00:39:05"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADM202.pdf",
"pages": 10,
"sha256": "b5642da906a5c4ed",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "adm202jrwz.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.3,
10.3,
2.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",
"checked": "2026-11-11",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "adm202jrwz-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.3,
10.3,
2.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "afd337f481680660779bb6178901c526981bc578f8189d1ea8a8daf95d1030ea",
"checked": "2026-11-11",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}