Generated by kicad-footprint-generator · KiCad file format 20260206
ADM202JRWZ
Analog Devices · RS232 ICs · SOIC-16-300mil
ADM202JRWZ from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | External positive terminal connection for charge pump capacitor C1, which is used to generate the internal ±10 V supplies. |
| 2 | V+ | power_out | Internally generated positive supply (+10 V nominal) that can power external circuitry only if the current requirements are small. |
| 3 | C1− | passive | External negative terminal connection for charge pump capacitor C1. |
| 4 | C2+ | passive | External positive terminal connection for charge pump capacitor C2. |
| 5 | C2− | passive | External negative terminal connection for charge pump capacitor C2. |
| 6 | V− | power_out | Internally generated negative supply (−10 V nominal) that can power external circuitry only if the current requirements are small. |
| 7 | T2OUT | output | RS-232 level transmitter (driver) output, typically ±10 V, with continuous short-circuit duration permitted and short-circuit current of ±10 mA to ±60 mA. |
| 8 | R2IN | input | RS-232 receiver input that accepts ±30 V signal levels and has an internal 5 kΩ pull-down resistor to GND. |
| 9 | R2OUT | output | TTL/CMOS receiver output, with VOL of 0.4 V maximum at 1.6 mA and VOH of 3.5 V minimum at −1.0 mA. |
| 10 | T2IN | input | TTL/CMOS transmitter input with an internal 400 kΩ pull-up to VCC; if left unconnected the associated output is forced low. |
| 11 | T1IN | input | TTL/CMOS transmitter input with an internal 400 kΩ pull-up to VCC; if left unconnected the associated output is forced low. |
| 12 | R1OUT | output | TTL/CMOS receiver output, with VOL of 0.4 V maximum at 1.6 mA and VOH of 3.5 V minimum at −1.0 mA. |
| 13 | R1IN | input | RS-232 receiver input that accepts ±30 V signal levels and has an internal 5 kΩ pull-down resistor to GND. |
| 14 | T1OUT | output | RS-232 level transmitter (driver) output, typically ±10 V, with continuous short-circuit duration permitted and short-circuit current of ±10 mA to ±60 mA. |
| 15 | GND | power_in | Ground pin that must be connected to 0 V. |
| 16 | VCC | power_in | Power supply input of 5 V ±10%. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-16-300mil |
| Category | Communication Interface Chip |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage tolerance (VCC = 5 V ± 10%) | VCC | -10 | 10 | % | VCC = 5 V ± 10% | 3 | |
| Output voltage swing | 5 | 9 | V | VCC = 5 V ± 5%; T1OUT and T2OUT loaded with 3 kΩ to GND | 3 | ||
| Output voltage swing (TA = 25°C) | 5 | 9 | V | VCC = 5 V ± 10%; TA = 25°C; T1OUT and T2OUT loaded with 3 kΩ to GND | 3 | ||
| VCC power supply current | ICC | 2.5 | 6 | mA | No load; T1IN and T2IN = VCC, or T1IN and T2IN = GND | 3 | |
| Input logic threshold low | VINL | 0.8 | V | TxIN | 3 | ||
| Input logic threshold high | VINH | 2.4 | V | TxIN | 3 | ||
| Logic pull-up current | 12 | 25 | µA | TxIN = 0 V | 3 | ||
| RS-232 input voltage range | -30 | 30 | V | 3 | |||
| RS-232 input threshold low | 0.8 | 1.2 | V | 3 | |||
| RS-232 input threshold high | 1.6 | 2.4 | V | 3 | |||
| RS-232 input hysteresis | 0.2 | 0.4 | 1 | V | 3 | ||
| RS-232 input resistance | 3 | 5 | 7 | kΩ | TA = 0°C to 85°C | 3 | |
| TTL/CMOS output voltage low | VOL | 0.4 | V | IOUT = 1.6 mA | 3 | ||
| TTL/CMOS output voltage high | VOH | 3.5 | V | IOUT = -1.0 mA | 3 | ||
| Propagation delay (RS-232 to TTL) | 0.3 | 5 | µs | RS-232 to TTL | 3 | ||
| Transition region slew rate | 8 | V/µs | RL = 3 kΩ, CL = 1000 pF, measured from +3 V to -3 V or -3 V to +3 V | 3 | |||
| Baud rate | 120 | kB | RL = 3 kΩ, CL = 1 nF | 3 | |||
| Output resistance (power-down) | 300 | Ω | VCC = V+ = V- = 0 V, VOUT = ±2 V | 3 | |||
| RS-232 output short-circuit current | 10 | 60 | mA | 3 | |||
| VCC supply voltage (absolute maximum) | VCC | 6 | V | 4 | |||
| V+ supply (lower limit printed as (VCC − 0.3 V)) | V+ | 14 | V | 4 | |||
| V− supply (upper limit printed as +0.3 V) | V− | -14 | 0.3 | V | 4 | ||
| T1IN, T2IN input voltage (upper limit printed as (VCC + 0.3 V)) | -0.3 | V | 4 | ||||
| R1IN, R2IN input voltage | -30 | 30 | V | 4 | |||
| R1OUT, R2OUT output voltage (upper limit printed as (VCC + 0.3 V)) | -0.3 | V | 4 | ||||
| Power dissipation, 16-lead SOIC (RW-16) | 500 | mW | 4 | ||||
| Storage temperature range | -65 | 150 | °C | 4 | |||
| Lead temperature, vapor phase | 215 | °C | Vapor Phase (60 sec) | 4 | |||
| Lead temperature, infrared | 220 | °C | Infrared (15 sec) | 4 | |||
| ESD rating | 2000 | V | 4 | ||||
| Operating temperature range (Commercial, J version) | 0 | 70 | °C | 4 | |||
| Thermal impedance, junction to ambient, 16-lead SOIC (RW-16) | θJA | 105 | °C/W | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Deleted ADM203 Pin Configuration Figure and Figure 1 ......... 3 Changed TIN to TxIN.......................................................Throughout | 2 |
CAD (KiCad official)
- Symbol:
ADM202JRWZ - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
adm202jrwz-etched.step/adm202jrwz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adm202jrwz.step/adm202jrwz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (10 pp, sha256
b5642da906a5c4ed, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).