ADM1293-1BARUZ-RL7

{
  "slug": "adm1293-1baruz-rl7",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Energy Metering, TSSOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "data acquisition",
    "adm1293-1baruz-rl7",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "adm1293-1baruz-rl7.kicad_sym",
    "adm1293-1baruz-rl7.kicad_mod",
    "adm1293-1baruz-rl7.glb",
    "adm1293-1baruz-rl7.step",
    "adm1293-1baruz-rl7.lbr",
    "docs/hero.png",
    "docs/adm1293-1baruz-rl7-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "ADM1293-1BARUZ-RL7",
    "manufacturer": "Analog Devices",
    "package": "TSSOP-14",
    "pin_count": 14,
    "category": "Data Acquisition",
    "subcategory": "Energy Metering",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589800281464090624",
    "parts": {
      "symbol": "adm1293-1baruz-rl7.kicad_sym",
      "footprint": "adm1293-1baruz-rl7.kicad_mod",
      "model_3d": "adm1293-1baruz-rl7-etched.glb",
      "model_3d_plain": "adm1293-1baruz-rl7.glb",
      "model_3d_step": "adm1293-1baruz-rl7-etched.step",
      "model_3d_step_plain": "adm1293-1baruz-rl7.step",
      "lbr": "adm1293-1baruz-rl7.lbr"
    },
    "distributor_links": {
      "lcsc": "C657919"
    },
    "pins": [
      {
        "number": "1",
        "name": "VAUX",
        "type": "input",
        "description": "Auxiliary voltage monitoring input with 0 V to 1.2 V range or higher with external divider."
      },
      {
        "number": "2",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply input from 2.95 V to 20 V with UVLO at 2.4 V to 2.7 V and 3.3 mA quiescent current."
      },
      {
        "number": "3",
        "name": "VCAP",
        "type": "power_out",
        "description": "Internal regulated 2.7 V ±0.04 V supply output; requires 1 μF or greater decoupling capacitor."
      },
      {
        "number": "4",
        "name": "ADR1",
        "type": "input",
        "description": "PMBus address selection; tie low, to VCAP, float, or through 150 kΩ resistor to GND."
      },
      {
        "number": "5",
        "name": "ADR2",
        "type": "input",
        "description": "PMBus address selection; tie low, to VCAP, float, or through 150 kΩ resistor to GND."
      },
      {
        "number": "6",
        "name": "SDAI",
        "type": "input",
        "description": "PMBus serial data input (split SDA) with 1.1 V input high and 0.8 V input low; tie to SDAO if no bus split."
      },
      {
        "number": "7",
        "name": "SDAO",
        "type": "tri_state",
        "description": "PMBus serial data output (split SDA) open-drain with 0.4 V low at 1 mA or 1.5 V at 5 mA."
      },
      {
        "number": "8",
        "name": "SCL",
        "type": "tri_state",
        "description": "PMBus serial clock open-drain input with 1.1 V high, 0.8 V low, requiring external resistive pull-up."
      },
      {
        "number": "9",
        "name": "GPO1/ALERT1/CONV",
        "type": "tri_state",
        "description": "Multifunction open-drain output for general-purpose use, alert generation, or conversion triggering; 0.4 V output low at 1 mA."
      },
      {
        "number": "10",
        "name": "GPO2/ALERT2",
        "type": "tri_state",
        "description": "General-purpose or alert output open-drain with 0.4 V output low at 1 mA; active low, no internal pull-up."
      },
      {
        "number": "11",
        "name": "SENSEN",
        "type": "input",
        "description": "Negative terminal of differential current sense input for measuring voltage across external sense resistor."
      },
      {
        "number": "12",
        "name": "SENSEP",
        "type": "input",
        "description": "Positive terminal of differential current sense input; measures sense voltage from -20 mV to +20 mV."
      },
      {
        "number": "13",
        "name": "VIN",
        "type": "power_in",
        "description": "Primary voltage monitoring input with internal divider for direct monitoring of 0 V to 20 V or 0 V to 21 V with range select."
      },
      {
        "number": "14",
        "name": "GND",
        "type": "power_in",
        "description": "Chip ground connection to system's lowest potential."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 48,
        "cost_usd": 0.5214,
        "at": "2026-09-21T21:37:18"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589800281464090624",
        "pages": 48,
        "sha256": "db5dd54f6888714b",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "adm1293-1baruz-rl7.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.0
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3ee5786aae56190997aa793ba3cfc003fd616782770e29719b4562f012982245",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "adm1293-1baruz-rl7-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.0
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "398a09e75bed5c7105fe62738461fb72cf781655faaadba859051b31e50bb979",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}