component
ADM1293-1BARUZ-RL7
Public Made by Adomby adom
Analog Devices Energy Metering, TSSOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownADM1293-1BARUZ-RL7
Analog Devices · Energy Metering · TSSOP-14
ADM1293-1BARUZ-RL7 from Analog Devices, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VAUX | input | Auxiliary voltage monitoring input with 0 V to 1.2 V range or higher with external divider. |
| 2 | VCC | power_in | Positive supply input from 2.95 V to 20 V with UVLO at 2.4 V to 2.7 V and 3.3 mA quiescent current. |
| 3 | VCAP | power_out | Internal regulated 2.7 V ±0.04 V supply output; requires 1 μF or greater decoupling capacitor. |
| 4 | ADR1 | input | PMBus address selection; tie low, to VCAP, float, or through 150 kΩ resistor to GND. |
| 5 | ADR2 | input | PMBus address selection; tie low, to VCAP, float, or through 150 kΩ resistor to GND. |
| 6 | SDAI | input | PMBus serial data input (split SDA) with 1.1 V input high and 0.8 V input low; tie to SDAO if no bus split. |
| 7 | SDAO | tri_state | PMBus serial data output (split SDA) open-drain with 0.4 V low at 1 mA or 1.5 V at 5 mA. |
| 8 | SCL | tri_state | PMBus serial clock open-drain input with 1.1 V high, 0.8 V low, requiring external resistive pull-up. |
| 9 | GPO1/ALERT1/CONV | tri_state | Multifunction open-drain output for general-purpose use, alert generation, or conversion triggering; 0.4 V output low at 1 mA. |
| 10 | GPO2/ALERT2 | tri_state | General-purpose or alert output open-drain with 0.4 V output low at 1 mA; active low, no internal pull-up. |
| 11 | SENSEN | input | Negative terminal of differential current sense input for measuring voltage across external sense resistor. |
| 12 | SENSEP | input | Positive terminal of differential current sense input; measures sense voltage from -20 mV to +20 mV. |
| 13 | VIN | power_in | Primary voltage monitoring input with internal divider for direct monitoring of 0 V to 20 V or 0 V to 21 V with range select. |
| 14 | GND | power_in | Chip ground connection to system's lowest potential. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSSOP-14 |
| Category | Data Acquisition |
| Pins | 14 |
CAD (KiCad official)
- Symbol:
ADM1293-1BARUZ-RL7 - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
adm1293-1baruz-rl7-etched.step/adm1293-1baruz-rl7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adm1293-1baruz-rl7.step/adm1293-1baruz-rl7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (48 pp, sha256
db5dd54f6888714b, retrieved 2026-09-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).