main
History Download
Ray Publish 0.1.0 8c615d0

ADM1181AARWZ

Analog Devices · RS232 ICs · SOIC-16-300mil

ADM1181AARWZ from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive External capacitor 1 connects between C1+ and C1−; 0.1 µF is recommended, but larger capacitors of up to 47 µF can be used.
2 V+ power_out Internally generated positive supply (+9 V nominal).
3 C1− passive External capacitor 1 connects between C1+ and C1−; 0.1 µF is recommended, but larger capacitors of up to 47 µF can be used.
4 C2+ passive External capacitor 2 connects between C2+ and C2−; 0.1 µF is recommended, but larger capacitors of up to 47 µF can be used.
5 C2− passive External capacitor 2 connects between C2+ and C2−; 0.1 µF is recommended, but larger capacitors of up to 47 µF can be used.
6 V− power_out Internally generated negative supply (−9 V nominal).
7 T2OUT output Transmitter (driver) 2 output at RS-232 signal levels (typically ±9 V).
8 R2IN input Receiver 2 input accepting RS-232 signal levels, with an internal 5 kΩ pull-down resistor to GND.
9 R2OUT output Receiver 2 output at CMOS logic levels.
10 T2IN input Transmitter (driver) 2 input accepting TTL/CMOS levels.
11 T1IN input Transmitter (driver) 1 input accepting TTL/CMOS levels.
12 R1OUT output Receiver 1 output at CMOS logic levels.
13 R1IN input Receiver 1 input accepting RS-232 signal levels, with an internal 5 kΩ pull-down resistor to GND.
14 T1OUT output Transmitter (driver) 1 output at RS-232 signal levels (typically ±9 V).
15 GND power_in Ground pin; must be connected to 0 V.
16 VCC power_in Power supply input, 5 V ± 10%.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOIC-16-300mil
Category Communication Interface Chip/UART/485/232
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage Range 4.5 5 5.5 V 3
VCC Power Supply Current 2.5 6 mA No load 3
VCC Power Supply Current 13 18 mA RL = 3 kΩ to GND 3
Input Logic Threshold Low VINL 0.8 V TIN 3
Input Logic Threshold High VINH 2.4 V TIN 3
CMOS Output Voltage Low VOL 0.4 V IOUT = 3.2 mA 3
CMOS Output Voltage High VOH 3.5 V IOUT = −1 mA 3
Logic Pull-Up Current -25 12 25 µA TIN = 0 V 3
EIA-232 Input Voltage Range -30 30 V 3
EIA-232 Input Threshold Low 0.4 1.2 V 3
EIA-232 Input Threshold High 1.6 2.4 V 3
EIA-232 Input Resistance 3 5 7 kΩ TA = 0°C to 85°C 3
Output Voltage Swing -5 9 V All transmitter outputs loaded with 3 kΩ to ground 3
Transmitter Output Resistance 300 Ω VCC = 0 V, VOUT = ±2 V 3
RS-232 Output Short-Circuit Current -10 60 mA 3
Maximum Data Rate 230 kbps RL = 3 kΩ to 7 kΩ, CL = 50 pF to 1000 pF 3
Receiver Propagation Delay TPHL TPHL 0.1 1 µs 3
Receiver Propagation Delay TPLH TPLH 0.3 1 µs 3
Transmitter Propagation Delay 1 1.5 µs RL = 3 kΩ, CL = 1000 pF 3
Transition Region Slew Rate 3 8 30 V/µs RL = 3 kΩ, CL = 1000 pF; measured from +3 V to −3 V, or −3 V to +3 V 3
ESD Protection (I/O Pins), human body model -15 15 kV Human body model 3
ESD Protection (I/O Pins), IEC1000-4-2 air discharge -15 15 kV IEC1000-4-2 air discharge 3
ESD Protection (I/O Pins), IEC1000-4-2 contact discharge -8 8 kV IEC1000-4-2 contact discharge 3
EFT Protection (I/O Pins) -2 2 kV IEC1000-4-4 3
EMI Immunity 10 V/m IEC1000-4-3 3
VCC VCC -0.3 6 V 4
V+ V+ 14 V Printed as (VCC − 0.3 V) to +14 V; lower limit is an expression, not a number 4
V− V− -14 0.3 V Printed as +0.3 V to −14 V 4
Input Voltage, TIN TIN -0.3 V Printed upper limit is (V+, +0.3 V); not a number 4
Input Voltage, RIN RIN -30 30 V 4
Output Voltage, TOUT TOUT -15 15 V 4
Output Voltage, ROUT ROUT -0.3 V Printed upper limit is (VCC + 0.3 V); not a number 4
Operating Temperature Range -40 85 °C Industrial (A Version) 4
Storage Temperature Range -65 150 °C 4
Lead Temperature (Soldering) 300 °C Soldering, 10 sec 4
ESD Rating (MIL-STD-883B) (I/O Pins) -15 15 kV MIL-STD-883B 4
ESD Rating (IEC1000-4-2 Air) (I/O Pins) -15 15 kV IEC1000-4-2 air 4
ESD Rating (IEC1000-4-2 Contact) (I/O Pins) -8 8 kV IEC1000-4-2 contact 4
EFT Rating (IEC1000-4-4) (I/O Pins) -2 2 kV IEC1000-4-4 4

CAD (KiCad official)

  • Symbol: ADM1181AARWZ
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: adm1181aarwz-etched.step / adm1181aarwz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adm1181aarwz.step / adm1181aarwz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (16 pp, sha256 fe3b6cc7eddd2d68, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF