3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownADM1181AARWZ
Analog Devices · RS232 ICs · SOIC-16-300mil
ADM1181AARWZ from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | External capacitor 1 connects between C1+ and C1−; 0.1 µF is recommended, but larger capacitors of up to 47 µF can be used. |
| 2 | V+ | power_out | Internally generated positive supply (+9 V nominal). |
| 3 | C1− | passive | External capacitor 1 connects between C1+ and C1−; 0.1 µF is recommended, but larger capacitors of up to 47 µF can be used. |
| 4 | C2+ | passive | External capacitor 2 connects between C2+ and C2−; 0.1 µF is recommended, but larger capacitors of up to 47 µF can be used. |
| 5 | C2− | passive | External capacitor 2 connects between C2+ and C2−; 0.1 µF is recommended, but larger capacitors of up to 47 µF can be used. |
| 6 | V− | power_out | Internally generated negative supply (−9 V nominal). |
| 7 | T2OUT | output | Transmitter (driver) 2 output at RS-232 signal levels (typically ±9 V). |
| 8 | R2IN | input | Receiver 2 input accepting RS-232 signal levels, with an internal 5 kΩ pull-down resistor to GND. |
| 9 | R2OUT | output | Receiver 2 output at CMOS logic levels. |
| 10 | T2IN | input | Transmitter (driver) 2 input accepting TTL/CMOS levels. |
| 11 | T1IN | input | Transmitter (driver) 1 input accepting TTL/CMOS levels. |
| 12 | R1OUT | output | Receiver 1 output at CMOS logic levels. |
| 13 | R1IN | input | Receiver 1 input accepting RS-232 signal levels, with an internal 5 kΩ pull-down resistor to GND. |
| 14 | T1OUT | output | Transmitter (driver) 1 output at RS-232 signal levels (typically ±9 V). |
| 15 | GND | power_in | Ground pin; must be connected to 0 V. |
| 16 | VCC | power_in | Power supply input, 5 V ± 10%. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-16-300mil |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | 4.5 | 5 | 5.5 | V | 3 | ||
| VCC Power Supply Current | 2.5 | 6 | mA | No load | 3 | ||
| VCC Power Supply Current | 13 | 18 | mA | RL = 3 kΩ to GND | 3 | ||
| Input Logic Threshold Low | VINL | 0.8 | V | TIN | 3 | ||
| Input Logic Threshold High | VINH | 2.4 | V | TIN | 3 | ||
| CMOS Output Voltage Low | VOL | 0.4 | V | IOUT = 3.2 mA | 3 | ||
| CMOS Output Voltage High | VOH | 3.5 | V | IOUT = −1 mA | 3 | ||
| Logic Pull-Up Current | -25 | 12 | 25 | µA | TIN = 0 V | 3 | |
| EIA-232 Input Voltage Range | -30 | 30 | V | 3 | |||
| EIA-232 Input Threshold Low | 0.4 | 1.2 | V | 3 | |||
| EIA-232 Input Threshold High | 1.6 | 2.4 | V | 3 | |||
| EIA-232 Input Resistance | 3 | 5 | 7 | kΩ | TA = 0°C to 85°C | 3 | |
| Output Voltage Swing | -5 | 9 | V | All transmitter outputs loaded with 3 kΩ to ground | 3 | ||
| Transmitter Output Resistance | 300 | Ω | VCC = 0 V, VOUT = ±2 V | 3 | |||
| RS-232 Output Short-Circuit Current | -10 | 60 | mA | 3 | |||
| Maximum Data Rate | 230 | kbps | RL = 3 kΩ to 7 kΩ, CL = 50 pF to 1000 pF | 3 | |||
| Receiver Propagation Delay TPHL | TPHL | 0.1 | 1 | µs | 3 | ||
| Receiver Propagation Delay TPLH | TPLH | 0.3 | 1 | µs | 3 | ||
| Transmitter Propagation Delay | 1 | 1.5 | µs | RL = 3 kΩ, CL = 1000 pF | 3 | ||
| Transition Region Slew Rate | 3 | 8 | 30 | V/µs | RL = 3 kΩ, CL = 1000 pF; measured from +3 V to −3 V, or −3 V to +3 V | 3 | |
| ESD Protection (I/O Pins), human body model | -15 | 15 | kV | Human body model | 3 | ||
| ESD Protection (I/O Pins), IEC1000-4-2 air discharge | -15 | 15 | kV | IEC1000-4-2 air discharge | 3 | ||
| ESD Protection (I/O Pins), IEC1000-4-2 contact discharge | -8 | 8 | kV | IEC1000-4-2 contact discharge | 3 | ||
| EFT Protection (I/O Pins) | -2 | 2 | kV | IEC1000-4-4 | 3 | ||
| EMI Immunity | 10 | V/m | IEC1000-4-3 | 3 | |||
| VCC | VCC | -0.3 | 6 | V | 4 | ||
| V+ | V+ | 14 | V | Printed as (VCC − 0.3 V) to +14 V; lower limit is an expression, not a number | 4 | ||
| V− | V− | -14 | 0.3 | V | Printed as +0.3 V to −14 V | 4 | |
| Input Voltage, TIN | TIN | -0.3 | V | Printed upper limit is (V+, +0.3 V); not a number | 4 | ||
| Input Voltage, RIN | RIN | -30 | 30 | V | 4 | ||
| Output Voltage, TOUT | TOUT | -15 | 15 | V | 4 | ||
| Output Voltage, ROUT | ROUT | -0.3 | V | Printed upper limit is (VCC + 0.3 V); not a number | 4 | ||
| Operating Temperature Range | -40 | 85 | °C | Industrial (A Version) | 4 | ||
| Storage Temperature Range | -65 | 150 | °C | 4 | |||
| Lead Temperature (Soldering) | 300 | °C | Soldering, 10 sec | 4 | |||
| ESD Rating (MIL-STD-883B) (I/O Pins) | -15 | 15 | kV | MIL-STD-883B | 4 | ||
| ESD Rating (IEC1000-4-2 Air) (I/O Pins) | -15 | 15 | kV | IEC1000-4-2 air | 4 | ||
| ESD Rating (IEC1000-4-2 Contact) (I/O Pins) | -8 | 8 | kV | IEC1000-4-2 contact | 4 | ||
| EFT Rating (IEC1000-4-4) (I/O Pins) | -2 | 2 | kV | IEC1000-4-4 | 4 |
CAD (KiCad official)
- Symbol:
ADM1181AARWZ - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
adm1181aarwz-etched.step/adm1181aarwz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adm1181aarwz.step/adm1181aarwz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
fe3b6cc7eddd2d68, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).