main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers adm1070artz: viewers rendered from the public page · Ray
adm1070artz-etched.glb adm1070artz: factory component page (tier=mfr) · Ray
adm1070artz-etched.step adm1070artz: factory component page (tier=mfr) · Ray
adm1070artz-hero.glb adm1070artz: hero GLB from the etched model (keeps the MPN mark) · Ray
adm1070artz-hero.overlay.json adm1070artz: hero GLB from the etched model (keeps the MPN mark) · Ray
adm1070artz.glb Publish 0.1.0 · Ray
adm1070artz.kicad_mod Publish 0.1.0 · Ray
adm1070artz.kicad_sym Publish 0.1.0 · Ray
adm1070artz.lbr Publish 0.1.0 · Ray
adm1070artz.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 6 pins · Ray

ADM1070ARTZ-REEL7

Analog Devices · Surge Suppressors · SOT-23-6

ADM1070ARTZ-REEL7 from Analog Devices, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 SENSE input Connects to the external FET source; the voltage across the sense resistor between SENSE and VEE is monitored, and when it reaches 100 mV for tON the regulator reduces the gate voltage, and tying SENSE to VEE turns current monitoring off.
2 VEE power_in Device negative supply voltage, which should be connected to the lower potential of the power supply.
3 VIN power_in Shunt-regulated on-chip supply, nominally VEE + 12.3 V, that must be current-fed through a dropper resistor from the higher supply potential; the device is undervoltage-locked out below 8.5 V.
4 TIMER input Sets the oscillator frequency and therefore the timing functions through an external capacitor to VEE, and tying the pin directly to VEE selects the internal default timing.
5 UV/OV input Input for undervoltage and overvoltage detection, where the gate is driven low if the voltage falls below 0.86 V or rises above 1.97 V, and R1/R2 = 40 gives an operating range of -36 V to -77 V.
6 GATE output Drives the external FET gate, being pulled low on an overvoltage or undervoltage fault or a current fault lasting longer than tON, and reaching a typical high level of 12 V when the FET is fully enhanced.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOT-23-6
Category TVS/Fuse/Board Level Protection
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Maximum Voltage Range -200 -48 -20 V Limited by Voltage Capability of External Components* 2
Typical Operating Voltage Range -77 -48 -36 V RDROP = 16 kΩ, R1/R2 = 40* 2
Operating Supply Voltage Range VSS 11.5 12.3 13 V ISS = 1.5 mA to 4.25 mA 2
Quiescent Supply Current ISS 0.4 0.85 1.3 mA VSS = 11.5 V 2
Maximum Shunt Supply Voltage VSS 12.5 14 V ISS = 20 mA 2
Undervoltage Lockout VLKO 7 8.5 10.5 V 2
Undervoltage Falling Threshold VUVF 0.81 0.86 0.91 V 2
Undervoltage Rising Threshold VUVR 0.86 0.91 0.96 V 2
Overvoltage Falling Threshold VOVF 1.85 1.93 2.01 V 2
Overvoltage Rising Threshold VOVR 1.89 1.97 2.05 V 2
Power-On Reset Delay tPOR 1.1 1.7 2.3 ms TIMER Pin Tied to VEE (VUVR < UV/OV < VOVF) 2
Power-On Reset Delay tPOR 0.9 1.21 1.51 ms CTIMER = 470 pF (VUVR < UV/OV < VOVF) 2
Voltage Fault Filter Time (UV/OV Out of Voltage Window) tFLT 1.1 1.7 2.3 ms TIMER Pin Tied to VEE (VUVR < UV/OV < VOVF) 2
Voltage Fault Filter Time (UV/OV Out of Voltage Window) tFLT 0.9 1.21 1.51 ms CTIMER = 470 pF (VUVR < UV/OV < VOVF) 2
Maximum Gate Voltage VGMAX 11 12 13 V IGATE = -1 µA 2
Minimum Gate Voltage VGMIN 0 50 mV IGATE = 1 µA 2
Pull-Up Current IGUP -20 -40 -55 µA VGATE = 0 V to 9 V, VSENSE = 0 2
Pull-Down Current IGDP 10 30 mA VGATE = VSS 2
Analog Current Limit Voltage (Rising) VLIM 90 100 110 mV IGATE = 0 µA to -15 µA 2
Circuit Breaker Limit Voltage (Rising) 75 88 100 mV 2
Circuit Breaker Limit Voltage (Falling) 60 79 95 mV 2
Fast Current Limit Voltage 107 126 145 mV 2
Control Loop Transconductance dIGATE/dVSENSE 1.5 2.75 4 µA/mV IGATE < 30 µA, TA = 25°C 2
Maximum Current Limit On Time tLIMITON 10 14 18 ms TIMER Pin Tied to VEE (VUVR < UV/OV < VOVF) 2
Maximum Current Limit On Time tLIMITON 7.4 9.9 12.4 ms CTIMER = 470 pF (VUVR < UV/OV < VOVF) 2
Current Limit PWM Off Time 320 450 580 ms TIMER Pin Tied to VEE (VUVR < UV/OV < VOVF)* 2
Current Limit PWM Off Time 240 320 400 ms CTIMER = 470 pF (VUVR < UV/OV < VOVF)* 2
Continuous Short Circuit Time before Latched Shutdown tSHORT 2100 2800 3500 ms TIMER Pin Tied to VEE (VUVR < UV/OV < VOVF) 3
Continuous Short Circuit Time before Latched Shutdown tSHORT 1500 2000 2500 ms CTIMER = 470 pF (VUVR < UV/OV < VOVF)* 3
Operating Sense Voltage Range VSOP 0 0.11 V 3
Input Current ISENSE -500 500 µA VSENSE = -2 V to +2 V 3
External/Internal Selection Threshold VTIMERTHEI 0.3 0.45 0.6 V 3
High Trip Threshold VTIMERTHH 3 3.5 4 V 3
Low Trip Threshold VTIMERTHL 1.2 1.5 1.8 V 3
Pull-Down Current ITIMERDN 15 24 31 µA VTIMER > VTIMERTHH 3
Pull-Up Current ITIMERUP -15 -24 -31 µA VTIMERTHEI < VTIMER < VTIMERTHL 3
Start-Up Current ITIMERSTART -12 -19 -26 µA VTIMER < VTIMERTHEI 3
Supply Voltage (VDD-VEE) VDD-VEE -200 -0.3 V 3
Maximum Shunt Supply Voltage VSS 16 V 3
SENSE Pin -2 16 V 3
GATE Pin -0.3 16 V 3
UV/OV Pin -0.3 15 V 3
TIMER Pin -0.3 10 V 3
Maximum Junction Temperature 125 °C 3
Temperature Range -40 85 °C 3
Continuous Power Dissipation 282 mW 3
Storage Temperature Range -65 150 °C 3
Lead Temperature (Soldering, 10 sec) 300 °C Soldering, 10 sec 3
Thermal Resistance, Junction-to-Ambient, 6-Lead SOT-23 JA 226.6 °C/W 6-Lead SOT-23 Package 3
Thermal Resistance, Junction-to-Case, 6-Lead SOT-23 JC 91.99 °C/W 6-Lead SOT-23 Package 3

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: ADM1070ARTZ-REEL7
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: adm1070artz-etched.step / adm1070artz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adm1070artz.step / adm1070artz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (16 pp, sha256 a60b82e24cb32562, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF