component
ADG3304SRUZ-EP-RL7
Public Made by Adomby adom
Analog Devices Translators / Level Shifters, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownADG3304SRUZ-EP-RL7
Analog Devices · Translators / Level Shifters · TSSOP-14
ADG3304SRUZ-EP-RL7 from Analog Devices, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCCA | power_in | Power supply voltage input for the A1 to A4 I/O pins, which must satisfy 1.15 V ≤ VCCA ≤ VCCY. |
| 2 | A1 | bidirectional | Input/output A1, referenced to VCCA. |
| 3 | A2 | bidirectional | Input/output A2, referenced to VCCA. |
| 4 | A3 | bidirectional | Input/output A3, referenced to VCCA. |
| 5 | A4 | bidirectional | Input/output A4, referenced to VCCA. |
| 6 | NC | unconnected | No connect. |
| 7 | GND | power_in | Ground reference, 0 V. |
| 8 | EN | input | Active high enable input referenced to VCCA; when pulled low, both the A and Y side terminals are placed in the high impedance state. |
| 9 | NC | unconnected | No connect. |
| 10 | Y4 | bidirectional | Input/output Y4, referenced to VCCY. |
| 11 | Y3 | bidirectional | Input/output Y3, referenced to VCCY. |
| 12 | Y2 | bidirectional | Input/output Y2, referenced to VCCY. |
| 13 | Y1 | bidirectional | Input/output Y1, referenced to VCCY. |
| 14 | VCCY | power_in | Power supply voltage input for the Y1 to Y4 I/O pins, 1.65 V ≤ VCC ≤ 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSSOP-14 |
| Category | Logic ICs |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input High Voltage (A side), VCCA = 1.2 V + 0.1 V/−0.05 V | VIHA | 0.88 | ×VCCA | VCCA = 1.2 V + 0.1 V/−0.05 V | 3 | ||
| Input High Voltage (A side), VCCA = 1.8 V ± 0.15 V | VIHA | 0.72 | ×VCCA | VCCA = 1.8 V ± 0.15 V | 3 | ||
| Input High Voltage (A side), VCCA = 2.5 V ± 0.2 V | VIHA | 1.7 | V | VCCA = 2.5 V ± 0.2 V | 3 | ||
| Input High Voltage (A side), VCCA = 3.3 V ± 0.3 V | VIHA | 2.2 | V | VCCA = 3.3 V ± 0.3 V | 3 | ||
| Input High Voltage (A side), VCCA = 5 V ± 0.5 V | VIHA | 0.7 | ×VCCA | VCCA = 5 V ± 0.5 V | 3 | ||
| Input Low Voltage (A side), VCCA = 1.2 V + 0.1 V/−0.05 V | VILA | 0.35 | ×VCCA | VCCA = 1.2 V + 0.1 V/−0.05 V | 3 | ||
| Input Low Voltage (A side), VCCA = 1.8 V ± 0.15 V | VILA | 0.35 | ×VCCA | VCCA = 1.8 V ± 0.15 V | 3 | ||
| Input Low Voltage (A side), VCCA = 2.5 V ± 0.2 V | VILA | 0.7 | V | VCCA = 2.5 V ± 0.2 V | 3 | ||
| Input Low Voltage (A side), VCCA = 3.3 V ± 0.3 V | VILA | 0.8 | V | VCCA = 3.3 V ± 0.3 V | 3 | ||
| Input Low Voltage (A side), VCCA = 5 V ± 0.5 V | VILA | 0.3 | ×VCCA | VCCA = 5 V ± 0.5 V | 3 | ||
| Output Low Voltage (A side) | VOLA | 0.4 | V | VY = 0 V, IOL = 20 μA | 3 | ||
| Leakage Current (A side), Hi-Z | ILA, Hi-Z | -1 | 1 | μA | VA = 0 V/VCCA, EN = 0 | 3 | |
| Input High Voltage (Y side), VCCY = 1.8 V ± 0.15 V | VIHY | 0.67 | ×VCCY | VCCY = 1.8 V ± 0.15 V | 3 | ||
| Input High Voltage (Y side), VCCY = 2.5 V ± 0.2 V | VIHY | 1.7 | V | VCCY = 2.5 V ± 0.2 V | 3 | ||
| Input High Voltage (Y side), VCCY = 3.3 V ± 0.3 V | VIHY | 2 | V | VCCY = 3.3 V ± 0.3 V | 3 | ||
| Input High Voltage (Y side), VCCY = 5 V ± 0.5 V | VIHY | 0.7 | ×VCCY | VCCY = 5 V ± 0.5 V | 3 | ||
| Input Low Voltage (Y side), VCCY = 1.8 V ± 0.15 V | VILY | 0.35 | ×VCCY | VCCY = 1.8 V ± 0.15 V | 3 | ||
| Input Low Voltage (Y side), VCCY = 2.5 V ± 0.2 V | VILY | 0.7 | V | VCCY = 2.5 V ± 0.2 V | 3 | ||
| Input Low Voltage (Y side), VCCY = 3.3 V ± 0.3 V | VILY | 0.8 | V | VCCY = 3.3 V ± 0.3 V | 3 | ||
| Input Low Voltage (Y side), VCCY = 5 V ± 0.5 V | VILY | 0.25 | ×VCCY | VCCY = 5 V ± 0.5 V | 3 | ||
| Output Low Voltage (Y side) | VOLY | 0.4 | V | VA = 0 V, IOL = 20 μA | 3 | ||
| Leakage Current (Y side), Hi-Z | ILY, Hi-Z | -1 | 1 | μA | VY = 0 V/VCCY, EN = 0 | 3 | |
| Enable Input High Voltage, VCCA = 1.2 V + 0.1 V/−0.05 V | VIHEN | 0.88 | ×VCCA | VCCA = 1.2 V + 0.1 V/−0.05 V | 3 | ||
| Enable Input High Voltage, VCCA = 1.8 V ± 0.15 V | VIHEN | 0.72 | ×VCCA | VCCA = 1.8 V ± 0.15 V | 3 | ||
| Enable Input High Voltage, VCCA = 2.5 V ± 0.2 V | VIHEN | 1.7 | V | VCCA = 2.5 V ± 0.2 V | 3 | ||
| Enable Input High Voltage, VCCA = 3.3 V ± 0.3 V | VIHEN | 2.2 | V | VCCA = 3.3 V ± 0.3 V | 3 | ||
| Enable Input High Voltage, VCCA = 5 V ± 0.5 V | VIHEN | 0.7 | ×VCCA | VCCA = 5 V ± 0.5 V | 3 | ||
| Enable Input Low Voltage, VCCA = 1.2 V + 0.1 V/−0.05 V | VILEN | 0.35 | ×VCCA | VCCA = 1.2 V + 0.1 V/−0.05 V | 3 | ||
| Enable Input Low Voltage, VCCA = 1.8 V ± 0.15 V | VILEN | 0.35 | ×VCCA | VCCA = 1.8 V ± 0.15 V | 3 | ||
| Enable Input Low Voltage, VCCA = 2.5 V ± 0.2 V | VILEN | 0.7 | V | VCCA = 2.5 V ± 0.2 V | 3 | ||
| Enable Input Low Voltage, VCCA = 3.3 V ± 0.3 V | VILEN | 0.8 | V | VCCA = 3.3 V ± 0.3 V | 3 | ||
| Enable Input Low Voltage, VCCA = 5 V ± 0.5 V | VILEN | 0.3 | ×VCCA | VCCA = 5 V ± 0.5 V | 3 | ||
| Enable Leakage Current | ILEN | -1 | 1 | μA | VEN = 0 V/VCCA, VA = 0 V | 3 | |
| Enable Time | tEN | 1 | 1.8 | μs | RS = RT = 50 Ω, VA = 0 V/VCCA (A→Y); VY = 0 V/VCCY (Y→A) | 3 | |
| Power Supply Voltage VCCA | VCCA | 1.15 | 5.5 | V | VCCA ≤ VCCY | 5 | |
| Power Supply Voltage VCCY | VCCY | 1.65 | 5.5 | V | 5 | ||
| Quiescent Power Supply Current ICCA | ICCA | 0.17 | 5 | μA | VA = 0 V/VCCA, VY = 0 V/VCCY, VCCA = VCCY = 5.5 V, EN = 1 | 5 | |
| Quiescent Power Supply Current ICCY | ICCY | 0.27 | 5 | μA | VA = 0 V/VCCA, VY = 0 V/VCCY, VCCA = VCCY = 5.5 V, EN = 1 | 5 | |
| Three-State Mode Power Supply Current IHi-Z, A | IHi-Z, A | 0.1 | 5 | μA | VCCA = VCCY = 5.5 V, EN = 0 | 5 | |
| Three-State Mode Power Supply Current IHi-Z, Y | IHi-Z, Y | 0.1 | 5 | μA | VCCA = VCCY = 5.5 V, EN = 0 | 5 | |
| Operating Temperature Range | TA | -55 | 125 | °C | 6 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 6 | ||
| Junction Temperature | TJ | 150 | °C | 6 | |||
| VCCA to GND | VCCA | -0.3 | 7 | V | 6 | ||
| EN to GND | EN | -0.3 | 7 | V | 6 | ||
| Thermal Impedance θJA, 14-Lead TSSOP | θJA | 112.6 | °C/W | 4-layer board | 6 | ||
| Propagation Delay tP, A→Y (3.3 V ≤ VCCA ≤ VCCY, VCCY = 5 V) | tP, A→Y | 6 | 15 | ns | 3.3 V ± 0.3 V ≤ VCCA ≤ VCCY, VCCY = 5 V ± 0.5 V, RS = RT = 50 Ω, CL = 50 pF | 4 | |
| Rise Time tR, A→Y (3.3 V ≤ VCCA ≤ VCCY, VCCY = 5 V) | tR, A→Y | 2 | 5 | ns | 3.3 V ± 0.3 V ≤ VCCA ≤ VCCY, VCCY = 5 V ± 0.5 V, RS = RT = 50 Ω, CL = 50 pF | 4 | |
| Fall Time tF, A→Y (3.3 V ≤ VCCA ≤ VCCY, VCCY = 5 V) | tF, A→Y | 2 | 5 | ns | 3.3 V ± 0.3 V ≤ VCCA ≤ VCCY, VCCY = 5 V ± 0.5 V, RS = RT = 50 Ω, CL = 50 pF | 4 | |
| Propagation Delay tP, Y→A (3.3 V ≤ VCCA ≤ VCCY, VCCY = 5 V) | tP, Y→A | 4 | 10 | ns | 3.3 V ± 0.3 V ≤ VCCA ≤ VCCY, VCCY = 5 V ± 0.5 V, RS = RT = 50 Ω, CL = 15 pF | 4 | |
| Rise Time tR, Y→A (3.3 V ≤ VCCA ≤ VCCY, VCCY = 5 V) | tR, Y→A | 1 | 5 | ns | 3.3 V ± 0.3 V ≤ VCCA ≤ VCCY, VCCY = 5 V ± 0.5 V, RS = RT = 50 Ω, CL = 15 pF | 4 | |
| Fall Time tF, Y→A (3.3 V ≤ VCCA ≤ VCCY, VCCY = 5 V) | tF, Y→A | 3 | 10 | ns | 3.3 V ± 0.3 V ≤ VCCA ≤ VCCY, VCCY = 5 V ± 0.5 V, RS = RT = 50 Ω, CL = 15 pF | 4 | |
| Propagation Delay tP, A→Y (1.8 V ≤ VCCA ≤ VCCY, VCCY = 3.3 V) | tP, A→Y | 8 | 15 | ns | 1.8 V ± 0.15 V ≤ VCCA ≤ VCCY, VCCY = 3.3 V ± 0.3 V, RS = RT = 50 Ω, CL = 50 pF | 4 | |
| Propagation Delay tP, Y→A (1.8 V ≤ VCCA ≤ VCCY, VCCY = 3.3 V) | tP, Y→A | 5 | 12 | ns | 1.8 V ± 0.15 V ≤ VCCA ≤ VCCY, VCCY = 3.3 V ± 0.3 V, RS = RT = 50 Ω, CL = 15 pF | 4 | |
| Propagation Delay tP, A→Y (1.15 V ≤ VCCA ≤ VCCY, VCCY = 3.3 V) | tP, A→Y | 9 | 27 | ns | 1.15 V to 1.3 V ≤ VCCA ≤ VCCY, VCCY = 3.3 V ± 0.3 V, RS = RT = 50 Ω, CL = 50 pF | 4 | |
| Propagation Delay tP, Y→A (1.15 V ≤ VCCA ≤ VCCY, VCCY = 3.3 V) | tP, Y→A | 5 | 13 | ns | 1.15 V to 1.3 V ≤ VCCA ≤ VCCY, VCCY = 3.3 V ± 0.3 V, RS = RT = 50 Ω, CL = 15 pF | 4 | |
| Propagation Delay tP, A→Y (1.15 V ≤ VCCA ≤ VCCY, VCCY = 1.8 V) | tP, A→Y | 12 | 35 | ns | 1.15 V to 1.3 V ≤ VCCA ≤ VCCY, VCCY = 1.8 V ± 0.3 V, RS = RT = 50 Ω, CL = 50 pF | 5 | |
| Propagation Delay tP, Y→A (1.15 V ≤ VCCA ≤ VCCY, VCCY = 1.8 V) | tP, Y→A | 14 | 40 | ns | 1.15 V to 1.3 V ≤ VCCA ≤ VCCY, VCCY = 1.8 V ± 0.3 V, RS = RT = 50 Ω, CL = 15 pF | 5 | |
| Propagation Delay tP, A→Y (2.5 V ≤ VCCA ≤ VCCY, VCCY = 3.3 V) | tP, A→Y | 7 | 15 | ns | 2.5 V ± 0.2 V ≤ VCCA ≤ VCCY, VCCY = 3.3 V ± 0.3 V, RS = RT = 50 Ω, CL = 50 pF | 5 | |
| Propagation Delay tP, Y→A (2.5 V ≤ VCCA ≤ VCCY, VCCY = 3.3 V) | tP, Y→A | 5 | 12 | ns | 2.5 V ± 0.2 V ≤ VCCA ≤ VCCY, VCCY = 3.3 V ± 0.3 V, RS = RT = 50 Ω, CL = 15 pF | 5 |
CAD (KiCad official)
- Symbol:
ADG3304SRUZ-EP-RL7 - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
adg3304sruz-ep-rl7-etched.step/adg3304sruz-ep-rl7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adg3304sruz-ep-rl7.step/adg3304sruz-ep-rl7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (8 pp, sha256
4841f1e0ba6a4294, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).